Construction and Building Materials - juin 2012

Publié:	juin 2012

Auteur(s)	Titre	Page(s)
Arizzi, A. / Cultrone, G.	Aerial lime-based mortars blended with a pozzolanic additive and different admixtures: A mineralogical, textural and physical-mechanical study	135-143
Segura Castillo, Luis / Aguado de Cea, Antonio	Bi-layer diaphragm walls: Evolution of concrete-to-concrete bond strength at early ages	29-37
Faella, Ciro / Camorani, Gianpietro / Martinelli, Enzo / Paciello, Sergio O. / Perri, Francesco	Bond behaviour of FRP strips glued on masonry: Experimental investigation and empirical formulation	353-363
Hasholt, Marianne Tange / Jensen, Ole Mejlhede / Kovler, Konstantin / Zhutovsky, Semion	Can superabsorent polymers mitigate autogenous shrinkage of internally cured concrete without compromising the strength?	226-230
Zhao, Wenbin / Xiao, Feipeng / Amirkhanian, Serji N. / Putman, Bradley J.	Characterization of rutting performance of warm additive modified asphalt mixtures	265-272
Burgos-Montes, Olga / Palacios, Marta / Rivilla, Patricia / Puertas, Francisca	Compatibility between superplasticizer admixtures and cements with mineral additions	300-309
Lin, Feng / Song, Xiaobin / Gu, Xianglin / Peng, Bin / Yang, Lianping	Cracking analysis of massive concrete walls with cracking control techniques	12-21
Dai, Qingli / Ng, Kenny / Zhou, Jun / Kreiger, Eric L. / Ahlborn, Theresa M.	Damage investigation of single-edge notched beam tests with normal strength concrete and ultra high performance concrete specimens using acoustic emission techniques	231-242
Pérez-Jiménez, F. E. / Botella, R. / Miró, R.	Differentiating between damage and thixotropy in asphalt binder's fatigue tests	212-219
Karahan, Okan / Hossain, Khandaker M. A. / Özbay, Erdoğan / Lachemi, Mohamed / Sancak, Emre	Effect of metakaolin content on the properties self-consolidating lightweight concrete	320-325
Belaidi, A. S. E. / Azzouz, L. / Kadri, E. / Kenai, S.	Effect of natural pozzolana and marble powder on the properties of self-compacting concrete	251-257
Ferraro, Rossella M. / Nanni, Antonio	Effect of off-white rice husk ash on strength, porosity, conductivity and corrosion resistance of white concrete	220-225
Uzun, İsmail / Terzi, Serdal	Evaluation of andesite waste as mineral filler in asphaltic concrete mixture	284-288
Bhutta, M. Aamer Rafique / Tsuruta, K. / Mirza, J.	Evaluation of high-performance porous concrete properties	67-73
Rong, Zhidan / Sun, Wei	Experimental and numerical investigation on the dynamic tensile behavior of ultra-high performance cement based composites	168-173
García, José Jaime / Rangel, Christian / Ghavami, Khosrow	Experiments with rings to determine the anisotropic elastic constants of bamboo	52-57
Xu, Linglin / Wang, Peiming / Zhang, Guofang	Formation of ettringite in Portland cement/calcium aluminate cement/calcium sulfate ternary system hydrates at lower temperatures	347-352
Al-Busaltan, Shakir / Nageim, Hassan Al / Atherton, William / Sharples, George	Green Bituminous Asphalt relevant for highway and airfield pavement	243-250
Di Ludovico, Marco / Piscitelli, Filomena / Prota, Andrea / Lavorgna, Marino / Mensitieri, Giuseppe / Manfredi, Gaetano	Improved mechanical properties of CFRP laminates at elevated temperatures and freeze–thaw cycling	273-283
Boğa, Ahmet Raif / Topçu, İlker Bekir	Influence of fly ash on corrosion resistance and chloride ion permeability of concrete	258-264
Łaźniewska-Piekarczyk, Beata	The influence of selected new generation admixtures on the workability, air-voids parameters and frost-resistance of self compacting concrete	310-319
Kim, B. / Roque, R. / Boyd, A. J.	Influence of transport properties on the determination of conditioning and thickness to obtain uniformly damaged FRC specimens	334-340
Nejad, F. Moghadas / Azarhoosh, A. R. / Hamedi, GH H. / Azarhoosh, M. J.	Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt	384-388
Bernier, Alexander / Zofka, Adam / Yut, Iliya	Laboratory evaluation of rutting susceptibility of polymer-modified asphalt mixtures containing recycled pavements	58-66
Al-Sibahy, Adnan / Edwards, Rodger	Mechanical and thermal properties of novel lightweight concrete mixtures containing recycled glass and metakaolin	157-167
Wang, Shasha / Zhang, Min-Hong / Quek, Ser Tong	Mechanical behavior of fiber-reinforced high-strength concrete subjected to high strain-rate compressive loading	1-11
Vejmelková, Eva / Keppert, Martin / Keršner, Zbynĕk / Rovnaníková, Pavla / Černý, Robert	Mechanical, fracture-mechanical, hydric, thermal, and durability properties of lime–metakaolin plasters for renovation of historical buildings	22-28
Medina, C. / Frías, M. / Sánchez de Rojas, M. I.	Microstructure and properties of recycled concretes using ceramic sanitary ware industry waste as coarse aggregate	112-118
Ge, Zhi / Gao, Zhili / Sun, Renjuan / Zheng, Li	Mix design of concrete with recycled clay-brick-powder using the orthogonal design method	289-293
Kim, Yong-Rak / Zhang, Jun / Ban, Hoki	Moisture damage characterization of warm-mix asphalt mixtures based on laboratory-field evaluation	204-211
González-Jorge, H. / González-Aguilera, D. / Rodríguez-Gonzálvez, P. / Arias, P.	Monitoring biological crusts in civil engineering structures using intensity data from terrestrial laser scanners	119-128
Omran, Hamid Y. / El-Hacha, Raafat	Nonlinear 3D finite element modeling of RC beams strengthened with prestressed NSM-CFRP strips	74-85
Zheng, Jian-Jun / Zhou, Xin-Zhu / Wu, Yu-Fei / Jin, Xian-Yu	A numerical method for the chloride diffusivity in concrete with aggregate shape effect	151-156
Xiao, Jianzhuang / Li, Wengui / Fan, Yuhui / Huang, Xiao	An overview of study on recycled aggregate concrete in China (1996–2011)	364-383
Muhammad, Bala / Ismail, Mohammad	Performance of natural rubber latex modified concrete in acidic and sulfated environments	129-134
Pereira-de-Oliveira, Luiz A. / Castro-Gomes, João P. / Santos, Pedro M. S.	The potential pozzolanic activity of glass and red-clay ceramic waste as cement mortars components	197-203
Wei, Xiaosheng / Xiao, Lianzhen / Li, Zongjin	Prediction of standard compressive strength of cement by the electrical resistivity measurement	341-346
Hosseinpourpia, R. / Varshoee, A. / Soltani, M. / Hosseini, P. / Ziaei Tabari, H.	Production of waste bio-fiber cement-based composites reinforced with nano-SiO2 particles as a substitute for asbestos cement composites	105-111
Gualtieri, Alessandro F. / Veratti, Linda / Tucci, Antonella / Esposito, Leonardo	Recycling of the product of thermal inertization of cement-asbestos in geopolymers	47-51
Sajedi, Fathollah / Razak, Hashim Abdul / Mahmud, Hilmi Bin / Shafigh, Payam	Relationships between compressive strength of cement–slag mortars under air and water curing regimes	188-196
Ramos, N. M. M. / Simões, M. L. / Delgado, J. M. P. Q. / de Freitas, V. P.	Reliability of the pull-off test for in situ evaluation of adhesion strength	86-93
García, Álvaro / Schlangen, Erik / van de Ven, Martin / Liu, Quantao	A simple model to define induction heating in asphalt mastic	38-46
Akkoyun, Ozgur	Simulation-based investment appraisal and risk analysis of natural building stone deposits	326-333
Ngon Ngon, G. F. / Yongue Fouateu, R. / Lecomte Nana, G. L. / Bitom, D. L. / Bilong, P. / Lecomte, G.	Study of physical and mechanical applications on ceramics of the lateritic and alluvial clayey mixtures of the Yaoundé region (Cameroon)	294-299
Al-Sibahy, Adnan / Edwards, Rodger	Thermal behaviour of novel lightweight concrete at ambient and elevated temperatures: Experimental, modelling and parametric studies	174-187
Mechtcherine, Viktor	Towards a durability framework for structural elements and structures made of or strengthened with high-performance fibre-reinforced composites	94-104
Bal, Harouna / Jannot, Yves / Quenette, Nathan / Chenu, Alain / Gaye, Salif	Water content dependence of the porosity, density and thermal capacity of laterite based bricks with millet waste additive	144-150

Auteur(s)

Titre

Page(s)

Arizzi, A. / Cultrone, G.

Aerial lime-based mortars blended with a pozzolanic additive and different admixtures: A mineralogical, textural and physical-mechanical study

135-143

Segura Castillo, Luis / Aguado de Cea, Antonio

Bi-layer diaphragm walls: Evolution of concrete-to-concrete bond strength at early ages

29-37

Faella, Ciro / Camorani, Gianpietro / Martinelli, Enzo / Paciello, Sergio O. / Perri, Francesco

Bond behaviour of FRP strips glued on masonry: Experimental investigation and empirical formulation

353-363

Hasholt, Marianne Tange / Jensen, Ole Mejlhede / Kovler, Konstantin / Zhutovsky, Semion

Can superabsorent polymers mitigate autogenous shrinkage of internally cured concrete without compromising the strength?

226-230

Zhao, Wenbin / Xiao, Feipeng / Amirkhanian, Serji N. / Putman, Bradley J.

Characterization of rutting performance of warm additive modified asphalt mixtures

265-272

Burgos-Montes, Olga / Palacios, Marta / Rivilla, Patricia / Puertas, Francisca

Compatibility between superplasticizer admixtures and cements with mineral additions

300-309

Lin, Feng / Song, Xiaobin / Gu, Xianglin / Peng, Bin / Yang, Lianping

Cracking analysis of massive concrete walls with cracking control techniques

12-21

Dai, Qingli / Ng, Kenny / Zhou, Jun / Kreiger, Eric L. / Ahlborn, Theresa M.

Damage investigation of single-edge notched beam tests with normal strength concrete and ultra high performance concrete specimens using acoustic emission techniques

231-242

Pérez-Jiménez, F. E. / Botella, R. / Miró, R.

Differentiating between damage and thixotropy in asphalt binder's fatigue tests

212-219

Karahan, Okan / Hossain, Khandaker M. A. / Özbay, Erdoğan / Lachemi, Mohamed / Sancak, Emre

Effect of metakaolin content on the properties self-consolidating lightweight concrete

320-325

Belaidi, A. S. E. / Azzouz, L. / Kadri, E. / Kenai, S.

Effect of natural pozzolana and marble powder on the properties of self-compacting concrete

251-257

Ferraro, Rossella M. / Nanni, Antonio

Effect of off-white rice husk ash on strength, porosity, conductivity and corrosion resistance of white concrete

220-225

Uzun, İsmail / Terzi, Serdal

Evaluation of andesite waste as mineral filler in asphaltic concrete mixture

284-288

Bhutta, M. Aamer Rafique / Tsuruta, K. / Mirza, J.

Evaluation of high-performance porous concrete properties

67-73

Rong, Zhidan / Sun, Wei

Experimental and numerical investigation on the dynamic tensile behavior of ultra-high performance cement based composites

168-173

García, José Jaime / Rangel, Christian / Ghavami, Khosrow

Experiments with rings to determine the anisotropic elastic constants of bamboo

52-57

Xu, Linglin / Wang, Peiming / Zhang, Guofang

Formation of ettringite in Portland cement/calcium aluminate cement/calcium sulfate ternary system hydrates at lower temperatures

347-352

Al-Busaltan, Shakir / Nageim, Hassan Al / Atherton, William / Sharples, George

Green Bituminous Asphalt relevant for highway and airfield pavement

243-250

Di Ludovico, Marco / Piscitelli, Filomena / Prota, Andrea / Lavorgna, Marino / Mensitieri, Giuseppe / Manfredi, Gaetano

Improved mechanical properties of CFRP laminates at elevated temperatures and freeze–thaw cycling

273-283

Boğa, Ahmet Raif / Topçu, İlker Bekir

Influence of fly ash on corrosion resistance and chloride ion permeability of concrete

258-264

Łaźniewska-Piekarczyk, Beata

The influence of selected new generation admixtures on the workability, air-voids parameters and frost-resistance of self compacting concrete

310-319

Kim, B. / Roque, R. / Boyd, A. J.

Influence of transport properties on the determination of conditioning and thickness to obtain uniformly damaged FRC specimens

334-340

Nejad, F. Moghadas / Azarhoosh, A. R. / Hamedi, GH H. / Azarhoosh, M. J.

Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt

384-388

Bernier, Alexander / Zofka, Adam / Yut, Iliya

Laboratory evaluation of rutting susceptibility of polymer-modified asphalt mixtures containing recycled pavements

58-66

Al-Sibahy, Adnan / Edwards, Rodger

Mechanical and thermal properties of novel lightweight concrete mixtures containing recycled glass and metakaolin

157-167

Wang, Shasha / Zhang, Min-Hong / Quek, Ser Tong

Mechanical behavior of fiber-reinforced high-strength concrete subjected to high strain-rate compressive loading

1-11

Vejmelková, Eva / Keppert, Martin / Keršner, Zbynĕk / Rovnaníková, Pavla / Černý, Robert

Mechanical, fracture-mechanical, hydric, thermal, and durability properties of lime–metakaolin plasters for renovation of historical buildings

22-28

Medina, C. / Frías, M. / Sánchez de Rojas, M. I.

Microstructure and properties of recycled concretes using ceramic sanitary ware industry waste as coarse aggregate

112-118

Ge, Zhi / Gao, Zhili / Sun, Renjuan / Zheng, Li

Mix design of concrete with recycled clay-brick-powder using the orthogonal design method

289-293

Kim, Yong-Rak / Zhang, Jun / Ban, Hoki

Moisture damage characterization of warm-mix asphalt mixtures based on laboratory-field evaluation

204-211

González-Jorge, H. / González-Aguilera, D. / Rodríguez-Gonzálvez, P. / Arias, P.

Monitoring biological crusts in civil engineering structures using intensity data from terrestrial laser scanners

119-128

Omran, Hamid Y. / El-Hacha, Raafat

Nonlinear 3D finite element modeling of RC beams strengthened with prestressed NSM-CFRP strips

74-85

Zheng, Jian-Jun / Zhou, Xin-Zhu / Wu, Yu-Fei / Jin, Xian-Yu

A numerical method for the chloride diffusivity in concrete with aggregate shape effect

151-156

Xiao, Jianzhuang / Li, Wengui / Fan, Yuhui / Huang, Xiao

An overview of study on recycled aggregate concrete in China (1996–2011)

364-383

Muhammad, Bala / Ismail, Mohammad

Performance of natural rubber latex modified concrete in acidic and sulfated environments

129-134

Pereira-de-Oliveira, Luiz A. / Castro-Gomes, João P. / Santos, Pedro M. S.

The potential pozzolanic activity of glass and red-clay ceramic waste as cement mortars components

197-203

Wei, Xiaosheng / Xiao, Lianzhen / Li, Zongjin

Prediction of standard compressive strength of cement by the electrical resistivity measurement

341-346

Hosseinpourpia, R. / Varshoee, A. / Soltani, M. / Hosseini, P. / Ziaei Tabari, H.

Production of waste bio-fiber cement-based composites reinforced with nano-SiO2 particles as a substitute for asbestos cement composites

105-111

Gualtieri, Alessandro F. / Veratti, Linda / Tucci, Antonella / Esposito, Leonardo

Recycling of the product of thermal inertization of cement-asbestos in geopolymers

47-51

Sajedi, Fathollah / Razak, Hashim Abdul / Mahmud, Hilmi Bin / Shafigh, Payam

Relationships between compressive strength of cement–slag mortars under air and water curing regimes

188-196

Ramos, N. M. M. / Simões, M. L. / Delgado, J. M. P. Q. / de Freitas, V. P.

Reliability of the pull-off test for in situ evaluation of adhesion strength

86-93

García, Álvaro / Schlangen, Erik / van de Ven, Martin / Liu, Quantao

A simple model to define induction heating in asphalt mastic

38-46

Akkoyun, Ozgur

Simulation-based investment appraisal and risk analysis of natural building stone deposits

326-333

Ngon Ngon, G. F. / Yongue Fouateu, R. / Lecomte Nana, G. L. / Bitom, D. L. / Bilong, P. / Lecomte, G.

Study of physical and mechanical applications on ceramics of the lateritic and alluvial clayey mixtures of the Yaoundé region (Cameroon)

294-299

Al-Sibahy, Adnan / Edwards, Rodger

Thermal behaviour of novel lightweight concrete at ambient and elevated temperatures: Experimental, modelling and parametric studies

174-187

Mechtcherine, Viktor

Towards a durability framework for structural elements and structures made of or strengthened with high-performance fibre-reinforced composites

94-104

Bal, Harouna / Jannot, Yves / Quenette, Nathan / Chenu, Alain / Gaye, Salif

Water content dependence of the porosity, density and thermal capacity of laterite based bricks with millet waste additive

144-150

Publicité

Construction and Building Materials - juin 2012

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - juin 2012

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.