Construction and Building Materials - v. 22, n. 6 (juin 2008)

Publié:	juin 2008

Auteur(s)	Titre	Page(s)
Doh, Young S. / Amirkhanian, Serji N. / Kim, Kwang W.	Analysis of unbalanced binder oxidation level in recycled asphalt mixture using GPC	1253-1260
Elinwa, Augustine U. / Ejeh, Stephen P. / Mamuda, Ahmed M.	Assessing of the fresh concrete properties of self-compacting concrete containing sawdust ash	1178-1182
Hamad, Bilal S. / Jumaa, Ghaida' K.	Bond strength of hot-dip galvanized hooked bars in normal strength concrete structures	1166-1177
Çelik, Osman Nuri / Atis, Cengiz Duran	Compactibility of hot bituminous mixtures made with crumb rubber-modified binders	1143-1147
Ahmad, Shamsad / Al-Kutti, Walid A. / Baghabra Al-Amoudi, Omar S. / Maslehuddin, Mohammad	Compliance criteria for quality concrete	1029-1036
Algin, Halil Murat / Turgut, Paki	Cotton and limestone powder wastes as brick material	1074-1080
Demir, Ismail / Serhat Baspinar, M.	Effect of silica fume and expanded perlite addition on the technical properties of the fly ash–lime–gypsum mixture	1299-1304
Lee, Soon-Jae / Amirkhanian, Serji N. / Kwon, Seung-Zoon	The effects of compaction temperature on CRM mixtures made with the SGC and the Marshall compactor	1122-1128
Haddadi, Smail / Ghorbel, Elhem / Laradi, Nadir	Effects of the manufacturing process on the performances of the bituminous binders modified with EVA	1212-1219
Castro, María / Sánchez, José A.	Estimation of asphalt concrete fatigue curves – A damage theory approach	1232-1238
Solís-Carcaño, Rómel / Moreno, Eric I.	Evaluation of concrete made with crushed limestone aggregate based on ultrasonic pulse velocity	1225-1231
Bektas, F. / Topal, T. / Goncuoglu, M. C. / Turanli, L.	Evaluation of the alkali reactivity of cherts from Turkey	1183-1190
Chen, Bing / Liu, Juanyu	Experimental application of mineral admixtures in lightweight concrete with high strength and workability	1108-1113
Liu, Chin-Tsung / Huang, Jong-Shin	Highly flowable reactive powder mortar as a repair material	1043-1050
Monteiro, S. N. / Alexandre, J. / Margem, J. I. / Sánchez, R. / Vieira, C. M. F.	Incorporation of sludge waste from water treatment plant into red ceramic	1281-1287
Zhong, Wenhui / Yao, Wu	Influence of damage degree on self-healing of concrete	1137-1142
Antiohos, S. K. / Papageorgiou, A. / Papadakis, V. G. / Tsimas, S.	Influence of quicklime addition on the mechanical properties and hydration degree of blended cements containing different fly ashes	1191-1200
Hassan, Hossam F. / Al Rawas, Amer / Hago, Abdel Wahid / Jamrah, Ahmad / Al-Futaisi, Ahmed / Al-Sabqi, Talal	Investigation of permeability and leaching of hot mix asphalt concrete containing oil-contaminated soils	1239-1246
Cong, Peiliang / Yu, Jianying / Wu, Shaopeng / Luo, Xiaofeng	Laboratory investigation of the properties of asphalt and its mixtures modified with flame retardant	1037-1042
Gutkowski, R. / Brown, K. / Shigidi, A. / Natterer, J.	Laboratory tests of composite wood–concrete beams	1059-1066
Diop, Mouhamadou Bassir / Grutzeck, Michael W.	Low temperature process to create brick	1114-1121
Reis, Engin M. / Rizkalla, Sami H.	Material characteristics of 3-D FRP sandwich panels	1009-1018
Kim, Chin-Yong / Kim, Jin-Keun	Numerical analysis of localized steel corrosion in concrete	1129-1136
Bandyopadhyaya, Ranja / Das, Animesh / Basu, Sumit	Numerical simulation of mechanical behaviour of asphalt mix	1051-1058
Collet, Florence / Bart, Marjorie / Serres, Laurent / Miriel, Jacques	Porous structure and water vapour sorption of hemp-based materials	1271-1280
Yuzer, Nabi / Aköz, Fevziye / Kabay, Nihat	Prediction of time to crack initiation in reinforced concrete exposed to chloride	1100-1107
Pacheco-Torgal, Fernando / Castro-Gomes, João / Jalali, Said	Properties of tungsten mine waste geopolymeric binder	1201-1211
Bagheri, A. R. / Alibabaie, M. / Babaie, M.	Reduction in the permeability of plastic concrete for cut-off walls through utilization of silica fume	1247-1252
Davraz, M. / Gunduz, L.	Reduction of alkali silica reaction risk in concrete by natural (micronised) amorphous silica	1093-1099
Jun, Li / Yuxia, Zhang / Yuzhen, Zhang	The research of GMA-g-LDPE modified Qinhuangdao bitumen	1067-1073
Jayaprakash, J. / Abdul Samad, Abdul Aziz / Anvar Abbasovich, Ashrabov / Abang Ali, Abang Abdullah	Shear capacity of precracked and non-precracked reinforced concrete shear beams with externally bonded bi-directional CFRP strips	1148-1165
Kim, Gyuseon / Sim, Jongsung / Oh, Hongseob	Shear strength of strengthened RC beams with FRPs in shear	1261-1270
Ozkan, Omer / Yüksel, İsa	Studies on mortars containing waste bottle glass and industrial by-products	1288-1298
Walliman, Nicholas / Baiche, Bousmaha / Ogden, Raymond	Thin-joint glued brickwork: Building in the British context	1081-1092
Degirmenci, Nurhayat	The using of waste phosphogypsum and natural gypsum in adobe stabilization	1220-1224
Kurugöl, Sedat / Tanaçan, Leyla / Ersoy, Halit Yaşa	Young's modulus of fiber-reinforced and polymer-modified lightweight concrete composites	1019-1028

Auteur(s)

Titre

Page(s)

Doh, Young S. / Amirkhanian, Serji N. / Kim, Kwang W.

Analysis of unbalanced binder oxidation level in recycled asphalt mixture using GPC

1253-1260

Elinwa, Augustine U. / Ejeh, Stephen P. / Mamuda, Ahmed M.

Assessing of the fresh concrete properties of self-compacting concrete containing sawdust ash

1178-1182

Hamad, Bilal S. / Jumaa, Ghaida' K.

Bond strength of hot-dip galvanized hooked bars in normal strength concrete structures

1166-1177

Çelik, Osman Nuri / Atis, Cengiz Duran

Compactibility of hot bituminous mixtures made with crumb rubber-modified binders

1143-1147

Ahmad, Shamsad / Al-Kutti, Walid A. / Baghabra Al-Amoudi, Omar S. / Maslehuddin, Mohammad

Compliance criteria for quality concrete

1029-1036

Algin, Halil Murat / Turgut, Paki

Cotton and limestone powder wastes as brick material

1074-1080

Demir, Ismail / Serhat Baspinar, M.

Effect of silica fume and expanded perlite addition on the technical properties of the fly ash–lime–gypsum mixture

1299-1304

Lee, Soon-Jae / Amirkhanian, Serji N. / Kwon, Seung-Zoon

The effects of compaction temperature on CRM mixtures made with the SGC and the Marshall compactor

1122-1128

Haddadi, Smail / Ghorbel, Elhem / Laradi, Nadir

Effects of the manufacturing process on the performances of the bituminous binders modified with EVA

1212-1219

Castro, María / Sánchez, José A.

Estimation of asphalt concrete fatigue curves – A damage theory approach

1232-1238

Solís-Carcaño, Rómel / Moreno, Eric I.

Evaluation of concrete made with crushed limestone aggregate based on ultrasonic pulse velocity

1225-1231

Bektas, F. / Topal, T. / Goncuoglu, M. C. / Turanli, L.

Evaluation of the alkali reactivity of cherts from Turkey

1183-1190

Chen, Bing / Liu, Juanyu

Experimental application of mineral admixtures in lightweight concrete with high strength and workability

1108-1113

Liu, Chin-Tsung / Huang, Jong-Shin

Highly flowable reactive powder mortar as a repair material

1043-1050

Monteiro, S. N. / Alexandre, J. / Margem, J. I. / Sánchez, R. / Vieira, C. M. F.

Incorporation of sludge waste from water treatment plant into red ceramic

1281-1287

Zhong, Wenhui / Yao, Wu

Influence of damage degree on self-healing of concrete

1137-1142

Antiohos, S. K. / Papageorgiou, A. / Papadakis, V. G. / Tsimas, S.

Influence of quicklime addition on the mechanical properties and hydration degree of blended cements containing different fly ashes

1191-1200

Hassan, Hossam F. / Al Rawas, Amer / Hago, Abdel Wahid / Jamrah, Ahmad / Al-Futaisi, Ahmed / Al-Sabqi, Talal

Investigation of permeability and leaching of hot mix asphalt concrete containing oil-contaminated soils

1239-1246

Cong, Peiliang / Yu, Jianying / Wu, Shaopeng / Luo, Xiaofeng

Laboratory investigation of the properties of asphalt and its mixtures modified with flame retardant

1037-1042

Gutkowski, R. / Brown, K. / Shigidi, A. / Natterer, J.

Laboratory tests of composite wood–concrete beams

1059-1066

Diop, Mouhamadou Bassir / Grutzeck, Michael W.

Low temperature process to create brick

1114-1121

Reis, Engin M. / Rizkalla, Sami H.

Material characteristics of 3-D FRP sandwich panels

1009-1018

Kim, Chin-Yong / Kim, Jin-Keun

Numerical analysis of localized steel corrosion in concrete

1129-1136

Bandyopadhyaya, Ranja / Das, Animesh / Basu, Sumit

Numerical simulation of mechanical behaviour of asphalt mix

1051-1058

Collet, Florence / Bart, Marjorie / Serres, Laurent / Miriel, Jacques

Porous structure and water vapour sorption of hemp-based materials

1271-1280

Yuzer, Nabi / Aköz, Fevziye / Kabay, Nihat

Prediction of time to crack initiation in reinforced concrete exposed to chloride

1100-1107

Pacheco-Torgal, Fernando / Castro-Gomes, João / Jalali, Said

Properties of tungsten mine waste geopolymeric binder

1201-1211

Bagheri, A. R. / Alibabaie, M. / Babaie, M.

Reduction in the permeability of plastic concrete for cut-off walls through utilization of silica fume

1247-1252

Davraz, M. / Gunduz, L.

Reduction of alkali silica reaction risk in concrete by natural (micronised) amorphous silica

1093-1099

Jun, Li / Yuxia, Zhang / Yuzhen, Zhang

The research of GMA-g-LDPE modified Qinhuangdao bitumen

1067-1073

Jayaprakash, J. / Abdul Samad, Abdul Aziz / Anvar Abbasovich, Ashrabov / Abang Ali, Abang Abdullah

Shear capacity of precracked and non-precracked reinforced concrete shear beams with externally bonded bi-directional CFRP strips

1148-1165

Kim, Gyuseon / Sim, Jongsung / Oh, Hongseob

Shear strength of strengthened RC beams with FRPs in shear

1261-1270

Ozkan, Omer / Yüksel, İsa

Studies on mortars containing waste bottle glass and industrial by-products

1288-1298

Walliman, Nicholas / Baiche, Bousmaha / Ogden, Raymond

Thin-joint glued brickwork: Building in the British context

1081-1092

Degirmenci, Nurhayat

The using of waste phosphogypsum and natural gypsum in adobe stabilization

1220-1224

Kurugöl, Sedat / Tanaçan, Leyla / Ersoy, Halit Yaşa

Young's modulus of fiber-reinforced and polymer-modified lightweight concrete composites

1019-1028

Publicité

Construction and Building Materials - v. 22, n. 6 (juin 2008)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - v. 22, n. 6 (juin 2008)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.