Construction and Building Materials - octobre 2018

Publié:	octobre 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Xargay, Hernán / Folino, Paula / Nuñez, Nicolás / Gómez, Martín / Caggiano, Antonio / Martinelli, Enzo	Acoustic Emission behavior of thermally damaged Self-Compacting High Strength Fiber Reinforced Concrete	519-530
Sáez del Bosque, I. F. / Frías, M. / Sánchez de Rojas, M. I. / Medina, C.	Activation temperature-mediated mineralogical transformations in slate quarry sludge: Pozzolanic properties	819-829
Flores, Guillermo / Gallego, Juan / Giuliani, Felice / Autelitano, Federico	Aging of asphalt binder in hot pavement rehabilitation	214-219
Zhou, Man / Liao, Jiacong / An, Lin / Deng, Wenqin / Hassanein, Mostafa Fahmi / Yu, Zhiwu	Analysis of stress-induced cracks in concrete and mortar under cyclic uniaxial compression	652-664
Abdel-Gawwad, H. A. / Khalil, Kh. A.	Application of thermal treatment on cement kiln dust and feldspar to create one-part geopolymer cement	231-237
Jové-Sandoval, Félix / Barbero-Barrera, M. Mar / Flores Medina, Nelson	Assessment of the mechanical performance of three varieties of pine needles as natural reinforcement of adobe	205-213
Han, Chuanzhou / Shen, Weiguo / Ji, Xiaoli / Wang, Zhongwen / Ding, Qingjun / Xu, Gelong / Lv, Zhenjie / Tang, Xinglei	Behavior of high performance concrete pastes with different mineral admixtures in simulated seawater environment	426-438
Nguyen-Tat, Tam / Ranaivomanana, Narintsoa / Balayssac, Jean-Paul	Characterization of damage in concrete beams under bending with Acoustic Emission Technique (AET)	487-500
Bao, Jiuwen / Wang, Licheng / Zhang, Qiuyu / Liang, Yongqin / Jiang, Peiqing / Song, Yupu	Combined effects of steel fiber and strain rate on the biaxial compressive behavior of concrete	394-405
Kwasny, Jacek / Soutsos, Marios N. / McIntosh, John A. / Cleland, David J.	Comparison of the effect of mix proportion parameters on behaviour of geopolymer and Portland cement mortars	635-651
Liu, Lulu / Cai, Guojun / Liu, Songyu	Compression properties and micro-mechanisms of rubber-sand particle mixtures considering grain breakage	1061-1072
Guo, Bingbing / Hong, Yi / Qiao, Guofu / Ou, Jinping	A COMSOL-PHREEQC interface for modeling the multi-species transport of saturated cement-based materials	839-853
Chen, Wenwu / Zhang, Yingmin / Zhang, Jingke / Dai, Pengfei	Consolidation effect of composite materials on earthen sites	730-737
Mohagheghi, A. / Arefinia, R.	Corrosion inhibition of carbon steel by dipotassium hydrogen phosphate in alkaline solutions with low chloride contamination	760-772
Meek, Alexandra H. / Beckett, Christopher T. S. / Carsana, Maddalena / Ciancio, Daniela	Corrosion protection of steel embedded in cement-stabilised rammed earth	942-953
Mei, Kaiyuan / Cheng, Xiaowei / Zhang, Hua / Yu, Yongjin / Gao, Xianshu / Zhao, Feng / Zhuang, Jia / Guo, Xiaoyang	The coupled reaction and crystal growth mechanism of tricalcium silicate (C3S): An experimental study for carbon dioxide geo-sequestration wells	1286-1294
Wu, Bo / Lin, Lang / Zhao, Junxian / Yan, Hua	Creep behavior of thin-walled circular steel tubular columns filled with demolished concrete lumps and fresh concrete	773-790
Coppola, L. / Coffetti, D. / Crotti, E. / Pastore, T.	CSA-based Portland-free binders to manufacture sustainable concretes for jointless slabs on ground	691-698
Li, Qingtao / Liu, Lujie / Huang, Zhaohui / Yuan, Guanglin	Degradation of the elastic modulus of cement-based grouting material with early ages after fire	510-518
Medina, C. / Sáez del Bosque, I. F. / Frías, M. / Sánchez de Rojas, M. I.	Design and characterisation of ternary cements containing rice husk ash and fly ash	65-76
Shubbar, Ali Abdulhussein / Jafer, Hassnen / Dulaimi, Anmar / Hashim, Khalid / Atherton, William / Sadique, Monower	The development of a low carbon binder produced from the ternary blending of cement, ground granulated blast furnace slag and high calcium fly ash: An experimental and statistical approach	1051-1060
Wang, Aiguo / Lyu, Bangcheng / Zhang, Zuhua / Liu, Kaiwei / Xu, Haiyan / Sun, Daosheng	The development of coral concretes and their upgrading technologies: A critical review	1004-1019
Fita, I. C. / Cruz, J. M. / Calvo, C. / Soriano, L. / Payá, J. / Sánchez, I.	Drying-rewetting cycles in ordinary Portland cement mortars investigated by electrical impedance spectroscopy	954-963
Medina, G. / Sáez del Bosque, I. F. / Frías, M. / Sánchez de Rojas, M. I. / Medina, C.	Durability of new recycled granite quarry dust-bearing cements	414-425
Nian, Tengfei / Li, Ping / Wei, Xiying / Wang, Penghui / Li, Huishan / Guo, Rui	The effect of freeze-thaw cycles on durability properties of SBS-modified bitumen	77-88
Ge, Xin / Ge, Yong / Li, Qinfei / Cai, Xiaoping / Yang, Wencui / Du, Yuanbo	Effect of low air pressure on the durability of concrete	830-838
Sadrmomtazi, Ali / Tajasosi, Sama / Tahmouresi, Behzad	Effect of materials proportion on rheology and mechanical strength and microstructure of ultra-high performance concrete (UHPC)	1103-1112
Norambuena-Contreras, J. / Gonzalez, A. / Concha, J. L. / Gonzalez-Torre, I. / Schlangen, E.	Effect of metallic waste addition on the electrical, thermophysical and microwave crack-healing properties of asphalt mixtures	1039-1050
Zhang, Wuman / Gong, Sheng / Zhang, Jingsong	Effect of rubber particles and steel fibers on frost resistance of roller compacted concrete in potassium acetate solution	752-759
Yang, Lei / Yilmaz, Erol / Li, Junwei / Liu, Hui / Jiang, Haiqiang	Effect of superplasticizer type and dosage on fluidity and strength behavior of cemented tailings backfill with different solid contents	290-298
Hadigheh, S. A. / Kashi, S.	Effectiveness of vacuum consolidation in bonding fibre reinforced polymer (FRP) composites onto concrete surfaces	854-864
Tomczak, Kamil / Jakubowski, Jacek	The effects of age, cement content, and healing time on the self-healing ability of high-strength concrete	149-159
Yang, Teng-Chun / Lee, Tung-Ying	Effects of density and heat treatment on the physico-mechanical properties of unidirectional round bamboo stick boards (UBSBs) made of Makino bamboo (Phyllostachys makinoi)	406-413
Ozeren Ozgul, Eren / Ozkul, M. Hulusi	Effects of epoxy, hardener, and diluent types on the hardened state properties of epoxy mortars	360-370
Yi, Gao / Ma, Cong / Long, Guangcheng / Zhao, Bin / Xie, Youjun	Effects of metakaolin on a novel aerated magnesium phosphate cement with high early strength	1130-1133
Cao, Fengze / Miao, Miao / Yan, Peiyu	Effects of reactivity of MgO expansive agent on its performance in cement-based materials and an improvement of the evaluating method of MEA reactivity	257-266
Shafiq, Nasir / Choo, Chin Siew / Isa, Mohamed Hasnain	Effects of used engine oil on slump, compressive strength and oxygen permeability of normal and blended cement concrete	178-184
Cheng, Yongzhen / Wang, Shuang / Li, Jun / Huang, Xiaoming / Li, Chang / Wu, Jingke	Engineering and mineralogical properties of stabilized expansive soil compositing lime and natural pozzolans	1031-1038
Uthaman, Sudha / Vishwakarma, Vinita / George, R. P. / Ramachandran, D. / Kumari, Kalpana / Preetha, R. / Premila, M. / Rajaraman, R. / Kamachi Mudali, U. / Amarendra, G.	Enhancement of strength and durability of fly ash concrete in seawater environments: Synergistic effect of nanoparticles	448-459
Sahebzamani, Hamidreza / Alavi, Mohammad Zia / Farzaneh, Orang	Evaluating effectiveness of polymerized pellets mix additives on improving asphalt mix properties	160-167
Zheng, Xiaoyan / Ji, Tao / Easa, Said M. / Ye, Yilong	Evaluating feasibility of using sea water curing for green artificial reef concrete	545-552
Zarzuela, Rafael / Moreno-Garrido, Ignacio / Blasco, Julian / Gil, M. L. Almoraima / Mosquera, María J.	Evaluation of the effectiveness of CuONPs/SiO2-based treatments for building stones against the growth of phototrophic microorganisms	501-509
Polaczyk, Pawel / Han, Bingye / Huang, Baoshan / Jia, Xiaoyang / Shu, Xiang	Evaluation of the hot mix asphalt compactability utilizing the impact compaction method	131-137
Santos, Ana Rita / Veiga, Maria do Rosário / Silva, António Santos / de Brito, Jorge / Álvarez, José Ignacio	Evolution of the microstructure of lime based mortars and influence on the mechanical behaviour: The role of the aggregates	907-922
Gribniak, Viktor / Jakubovskis, Ronaldas / Rimkus, Arvydas / Ng, Pui-Lam / Hui, David	Experimental and numerical analysis of strain gradient in tensile concrete prisms reinforced with multiple bars	572-583
Aiello, Carolina / Caterino, Nicola / Maddaloni, Giuseppe / Bonati, Antonio / Franco, Annalisa / Occhiuzzi, Antonio	Experimental and numerical investigation of cyclic response of a glass curtain wall for seismic performance assessment	596-609
Zhang, Jiong / She, Rui / Dai, Zhaoxia / Ming, Ruiping / Ma, Guodong / Cui, Xinzhuang / Li, Li	Experimental simulation study on pore clogging mechanism of porous pavement	803-818
Jiang, Chao / Wu, Chong / Jiang, Xu	Experimental study on fatigue performance of corroded high-strength steel wires used in bridges	681-690
Gholampour, Aliakbar / Ozbakkaloglu, Togay	Fiber-reinforced concrete containing ultra high-strength micro steel fibers under active confinement	299-306
Zhang, Cong / Fu, Jinyang / Yang, Junsheng / Ou, Xuefeng / Ye, Xintian / Zhang, Yi	Formulation and performance of grouting materials for underwater shield tunnel construction in karst ground	327-338
Rooholamini, H. / Hassani, A. / Aliha, M. R. M.	Fracture properties of hybrid fibre-reinforced roller-compacted concrete in mode I with consideration of possible kinked crack	248-256
Ma, Haoxia / Yu, Hongfa / Li, Chuang / Tan, Yongshan / Cao, Wentao / Da, Bo	Freeze–thaw damage to high-performance concrete with synthetic fibre and fly ash due to ethylene glycol deicer	197-204
Platt, Shawn / Harries, Kent A.	Geometry, material properties and bond performance of prototype titanium reinforcing bars	1253-1266
Celik, Abdullah / Yilmaz, Kemalettin / Canpolat, Orhan / Al-mashhadani, Mukhallad M. / Aygörmez, Yurdakul / Uysal, Mucteba	High-temperature behavior and mechanical characteristics of boron waste additive metakaolin based geopolymer composites reinforced with synthetic fibers	1190-1203
Liu, G. / Florea, M. V. A. / Brouwers, H. J. H.	The hydration and microstructure characteristics of cement pastes with high volume organic-contaminated waste glass powder	1177-1189
Abid, Sallal R. / Shamkhi, Mohammed S. / Mahdi, Noor S. / Daek, Yasir H.	Hydro-abrasive resistance of engineered cementitious composites with PP and PVA fibers	168-177
Laefer, Debra F. / Natanzi, Atteyeh S. / Zolanvari, S. M. Iman	Impact of thermal transfer on hydration heat of a Soundless Chemical Demolition Agent	348-359
Jia, Chen / Shao, Yongsong / Guo, Lanhui / Liu, Yangyang	Incipient corrosion behavior and mechanical properties of low-alloy steel in simulated industrial atmosphere	1242-1252
Novais, Rui M. / Carvalheiras, J. / Capela, M. N. / Seabra, M. P. / Pullar, R. C. / Labrincha, J. A.	Incorporation of glass fibre fabrics waste into geopolymer matrices: An eco-friendly solution for off-cuts coming from wind turbine blade production	876-883
Bareiro, Walter Gabriel / de Andrade Silva, Flávio / Sotelino, Elisa Dominguez / Gomes, Otávio da Fonseca Martins	The influence of alumina content on the chemical and mechanical behavior of refractory concretes fired at different temperatures	1214-1223
Shen, Dejian / Wang, Wenting / Liu, Jiwei / Zhao, Xiaoguang / Jiang, Guoqing	Influence of Barchip fiber on early-age cracking potential of high performance concrete under restrained condition	118-130
Özcan, Fatih / Emin Koç, Mehmet	Influence of ground pumice on compressive strength and air content of both non-air and air entrained concrete in fresh and hardened state	382-393
Rossignolo, J. A. / Borrachero, M. V. / Soriano, L. / Payá, J.	Influence of microwave oven calcination on the pozzolanicity of sugar cane bagasse ashes (SCBA) from the cogeneration industry	892-902
Bougara, Abdelkader / Lynsdale, Cyril / Milestone, Neil B.	The influence of slag properties, mix parameters and curing temperature on hydration and strength development of slag/cement blends	339-347
D'Antino, T. / Pisani, M. A.	Influence of sustained stress on the durability of glass FRP reinforcing bars	474-486
Simões, T. / Costa, H. / Dias-Da-Costa, D. / Júlio, E.	Influence of type and dosage of micro-fibres on the physical properties of fibre reinforced mortar matrixes	1277-1285
Zhang, Xiao-Long / Guo, Yan-Dong / Su, Jun-Feng / Han, Shan / Wang, Ying-Yuan / Tan, Yi-qiu	Investigating the electrothermal self-healing bituminous composite material using microcapsules containing rejuvenator with graphene/organic hybrid structure shells	1158-1176
Chen, Zheng / Yi, Chaofan / Bindiganavile, Vivek	Investigating the two-dimensional diffusion-reaction behaviour of sulphate ions in cement-based systems	791-802
Duan, Siyu / Liao, Hongqiang / Cheng, Fangqin / Song, Huiping / Yang, Hengquan	Investigation into the synergistic effects in hydrated gelling systems containing fly ash, desulfurization gypsum and steel slag	1113-1120
Wu, Saisai / Chen, Honghao / Ramandi, Hamed Lamei / Hagan, Paul C. / Hebblewhite, Bruce / Crosky, Alan / Saydam, Serkan	Investigation of cable bolts for stress corrosion cracking failure	1224-1231
Huang, Tingting / Luo, Rong	Investigation of effect of temperature on water vapor diffusing into asphalt mixtures	1204-1213
O'Ceallaigh, Conan / Sikora, Karol / McPolin, Daniel / Harte, Annette M.	An investigation of the viscoelastic creep behaviour of basalt fibre reinforced timber elements	220-230
Chen, Conglin / Podolsky, Joseph H. / Williams, R. Christopher / Cochran, Eric W.	Laboratory investigation of using acrylated epoxidized soybean oil (AESO) for asphalt modification	267-279
Tanyildizi, Harun	Long-term microstructure and mechanical properties of polymer-phosphazene concrete exposed to freeze-thaw	1121-1129
Kiza Rusati, Pacifique / Song, Ki-Il	Magnesium chloride and sulfate attacks on gravel-sand-cement-inorganic binder mixture	565-571
Mastali, M. / Kinnunen, P. / Isomoisio, H. / Karhu, M. / Illikainen, M.	Mechanical and acoustic properties of fiber-reinforced alkali-activated slag foam concretes containing lightweight structural aggregates	371-381
Du, Shaowen	Mechanical properties and reaction characteristics of asphalt emulsion mixture with activated ground granulated blast-furnace slag	439-447
Hu, Hang / Papastergiou, Panos / Angelakopoulos, Harris / Guadagnini, Maurizio / Pilakoutas, Kypros	Mechanical properties of SFRC using blended Recycled Tyre Steel Cords (RTSC) and Recycled Tyre Steel Fibres (RTSF)	553-564
Wang, L. / Yang, H. Q. / Zhou, S. H. / Chen, E. / Tang, S. W.	Mechanical properties, long-term hydration heat, shinkage behavior and crack resistance of dam concrete designed with low heat Portland (LHP) cement and fly ash	1073-1091
Zhu, Shengyang / Wang, Mingze / Zhai, Wanming / Cai, Chengbiao / Zhao, Chunfa / Zeng, Dongfang / Zhang, Jiawei	Mechanical property and damage evolution of concrete interface of ballastless track in high-speed railway: Experiment and simulation	460-473
He, Zhen / Deng, Hongyang / Fan, Fuping / Tan, Jianjun	Microstructure of four-graded roller compacted concrete	25-37
Wang, Zigeng / Dai, Qingli / Guo, Shuaicheng	Microwave-healing performance of modified asphalt mixtures with flake graphite and exfoliated graphite nanoplatelet	865-875
Lubelli, Barbara / Nijland, Timo G. / Tolboom, Hendrik-Jan	Moisture induced weathering of volcanic tuffstone	1134-1146
Wang, Hui / Gao, Xiaojian / Liu, Junzhe / Ren, Miao / Lu, Anxun	Multi-functional properties of carbon nanofiber reinforced reactive powder concrete	699-707
Graziani, Gabriela / Colombo, Chiara / Conti, Claudia / Possenti, Elena / Perelli Cippo, Enrico / Realini, Marco / Sassoni, Enrico	Neutron radiography as a tool for assessing penetration depth and distribution of a phosphate consolidant for limestone	238-247
Samson, Gabriel / Deby, Fabrice / Garciaz, Jean-Luc / Perrin, Jean-Louis	A new methodology for concrete resistivity assessment using the instantaneous polarization response of its metal reinforcement framework	531-544
Li, Zhuguo / Cao, Guodong / Guo, Kun	Numerical method for thixotropic behavior of fresh concrete	931-941
Chimeno Manguán, M. / Roibás Millán, E. / Simón Hidalgo, F.	On the determination of the modulus of elasticity of plasterboard plates	923-930
Rashad, Alaa M.	An overview on rheology, mechanical properties and durability of high-volume slag used as a cement replacement in paste, mortar and concrete	89-117
Dhanya, B. S. / Santhanam, Manu / Gettu, Ravindra / Pillai, Radhakrishna G.	Performance evaluation of concretes having different supplementary cementitious material dosages belonging to different strength ranges	984-995
Ding, Haibo / Gyasi, Justice / Hesp, Simon A. M. / Marks, Pamela / Nie, Yihua / Somuah, Michael / Tabib, Seyed / Tetteh, Nathaniel / Ubaid, Imad	Performance grading of extracted and recovered asphalt cements	996-1003
Ciofini, Daniele / Mencaglia, Andrea Azelio / Siano, Salvatore	A photoacoustic pulse-echo probe for monitoring surface stone mechanical properties: Validation tests in consolidation of Carrara marble	610-619
García-Vera, Victoria E. / Lanzón, Marcos	Physical-chemical study, characterisation and use of image analysis to assess the durability of earthen plasters exposed to rain water and acid rain	708-717
Onyari, E. K. / Ikotun, B. D.	Prediction of compressive and flexural strengths of a modified zeolite additive mortar using artificial neural network	1232-1241
Zhu, Wenjun / Dai, Jian-Guo / Poon, Chi-Sun	Prediction of the bond strength between non-uniformly corroded steel reinforcement and deteriorated concrete	1267-1276
Cheng, Yi / Hongqiang, Ma / Hongyu, Chen / Jiaxin, Wang / Jing, Shi / Zonghui, Li / Mingkai, Yu	Preparation and characterization of coal gangue geopolymers	318-326
Lu, Hang / Ye, Fen / Yuan, Jie / Yin, Wei	Properties comparison and mechanism analysis of naphthenic oil/SBS and nano-MMT/SBS modified asphalt	1147-1157
Rodin, Harry / Nassiri, Somayeh / Englund, Karl / Fakron, Osama / Li, Hui	Recycled glass fiber reinforced polymer composites incorporated in mortar for improved mechanical performance	738-751
Fernandes, Sara R. M. / Silva, Hugo M. R. D. / Oliveira, Joel R. M.	Recycled stone mastic asphalt mixtures incorporating high rates of waste materials	1-13
Zhang, Hua / Wang, Lei / Zheng, Kai / Bakura, Tijjani Jibrin / Totakhil, Peer Gul	Research on compressive impact dynamic behavior and constitutive model of polypropylene fiber reinforced concrete	584-595
Yao, Fei / Chen, Guangyu / Abula, Abulikemu	Research on signal processing of segment-grout defect in tunnel based on impact-echo method	280-289
Zhang, Hongliang / Bai, Yuzan / Cheng, Fenglei	Rheological and self-healing properties of asphalt binder containing microcapsules	138-148
Zhang, Da-Wang / Wang, Dong-Min / Liu, Ze / Xie, Fu-zhu	Rheology, agglomerate structure, and particle shape of fresh geopolymer pastes with different NaOH activators content	674-680
Elyamany, Hafez E. / Abd Elmoaty, Abd Elmoaty M. / Elshaboury, Ahmed M.	Setting time and 7-day strength of geopolymer mortar with various binders	974-983
Wu, Bo / Yu, Yong / Chen, Zongping / Zhao, Xiaolong	Shape effect on compressive mechanical properties of compound concrete containing demolished concrete lumps	50-64
Shi, Taibai / Chen, Wujun / Gao, Chengjun / Hu, Jianhui / Zhao, Bing / Zhang, Daxu / Qiu, Zhenyu	Shear behavior of architectural coated fabrics under biaxial bias-extension	964-973
Lima, Paulo R. L. / Barros, Joaquim A. O. / Roque, Alex B. / Fontes, Cintia M. A. / Lima, José M. F.	Short sisal fiber reinforced recycled concrete block for one-way precast concrete slabs	620-634
Luo, Xin / Xu, Jin-yu / Liu, Yang	The static constitutive model of fiber reinforced cellular materials	903-906
Zhang, Henian / Shen, Chen / Xi, Peisheng / Chen, Kaixiang / Zhang, Fang / Wang, Shaohan	Study on flexural properties of active magnesia carbonation concrete with fly ash content	884-891
Qu, Xin / Liu, Quan / Guo, Meng / Wang, Dawei / Oeser, Markus	Study on the effect of aging on physical properties of asphalt binder from a microscale perspective	718-729
Han, Jinsheng / Li, Zongli / Liu, Hengjie / Zhang, Guohui / Tan, Cong / Han, Jinjia	Study on the process of isothermal continuous drying and its effect on the strength of concrete of different strength grades	14-24
Alabdulkarem, Abdullah / Ali, Mohamed / Iannace, Gino / Sadek, Shereef / Almuzaiqer, Redhwan	Thermal analysis, microstructure and acoustic characteristics of some hybrid natural insulating materials	185-196
Cao, Wei / Mohammad, Louay / Barghabany, Peyman	Use of indirect tension test and viscoelastic continuum damage theory for fatigue characterization of asphalt mixtures	38-49
Jang, Seok-Joon / Jeong, Gwon-Young / Yun, Hyun-Do	Use of steel fibers as transverse reinforcement in diagonally reinforced coupling beams with normal- and high-strength concrete	1020-1030
Chen, Wei-Chih / Chen, Li-Hsien / Chen, Yao-Chung	Using a novel shear apparatus coupled with acoustic emission to investigate shear fracture evolution of cement-based materials in macro- and micro-views	665-673
Huseien, Ghasan Fahim / Sam, Abdul Rahman Mohd / Mirza, Jahangir / Tahir, Mahmood Md. / Asaad, Mohammad Ali / Ismail, Mohammad / Shah, Kwok Wei	Waste ceramic powder incorporated alkali activated mortars exposed to elevated Temperatures: Performance evaluation	307-317
Kaewunruen, Sakdirat / Ngamkhanong, Chayut / Papaelias, Mayorkinos / Roberts, Clive	Wet/dry influence on behaviors of closed-cell polymeric cross-linked foams under static, dynamic and impact loads	1092-1102

Informations
sur cette fiche
IssueID
21510
Publié(e) le:
25.11.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - octobre 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - octobre 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.