Composite Structures - août 2022

Publié:	août 2022

Auteur(s)	Titre	Page(s)
Yue, Nan / Broer, Agnes / Briand, William / Rébillat, Marc / Loutas, Theodoros / Zarouchas, Dimitrios	Assessing stiffness degradation of stiffened composite panels in post-buckling compression-compression fatigue using guided waves	115751
Zhang, Peng / Tan, Siyuan / Hu, Xiaofei / Yao, Weian / Zhuang, Xiaoying	A double-phase field model for multiple failures in composites	115730
Sharma, Pranjali / Sharma, Shubhangi / Bera, Tapan / Semwal, Kaladhar / Badhe, Rajesh M. / Sharma, Alok / Kapur, Gurpreet Singh / Ramakumar, S. S. V. / Neogi, Swati	Effects of dome shape on burst and weight performance of a type-3 composite pressure vessel for storage of compressed hydrogen	115732
Chen, Yuan / Ye, Lin / Han, Xu	Experimental and numerical investigation of zero Poisson’s ratio structures achieved by topological design and 3D printing of SCF/PA	115717
Xue, Congcong / Yu, Min / Yang, Biying / Wang, Tan / Saafi, Mohamed / Ye, Jianqiao	Experimental and numerical study on tensile properties of bolted GFRP joints at high and low temperatures	115743
Castro, Oscar / Yeniceli, Süleyman Cem / Berring, Peter / Semenov, Sergei / Branner, Kim	Experimental demonstration of strain-based damage method for optimized fatigue testing of wind turbine blades	115683
Ye, Sang / Li, Min / Zhang, Kaixuan / Zhao, Hong-Ping / Feng, Xi-Qiao	Extracting the properties of constituent phases from the overall response of composites: A deep neural network method	115707
Mirzaei, A. H. / Shokrieh, M. M. / Saeedi, A.	Fatigue behavior of laminated composites with embedded SMA wires	115753
Yuan, Wei-bin / Yu, Nanting / Li, Long-yuan / Fang, Yuan	Heat transfer analysis in multi-layered materials with interfacial thermal resistance	115728
Khayat, Majid / Baghlani, Abdolhossein / Najafgholipour, Mohammad Amir	A hybrid algorithm for modeling and studying of the effect of material and mechanical uncertainties on stability of sandwich FGM materials under thermal shock	115657
Liu, Yuanyuan / Liu, Airong / Yang, Jie / Zhang, Zixiang / Zhong, Zilin	In-plane dynamic instability of functionally graded porous arches reinforced by graphene platelet under a vertical base excitation	115705
Mao, Xiaoxiao / Zhang, Jingyu / Yuan, Pan / Yan, Feng / Wang, Haoyu / Jian, Xiaobin / Lu, Chuan / Ding, Shurong / Li, Yuanming	An innovative multi-layer shell model for in-pile thermo-mechanical behavior analysis of plate-type fuel assemblies	115735
Ponnusami, Sathiskumar A. / Cui, Hao / Erice, Borja / Lißner, Maria / Pathan, Mehtab / Petrinić, Nik	An integrated inverse numerical–experimental approach to determine the dynamic Mode-I interlaminar fracture toughness of fibre composites	115734
Kubiak, Tomasz / Zaczynska, Monika / Kaźmierczyk, Filip / Kolakowski, Zbigniew	Investigations of horizontal rotation at the support of bending beams as proof of global distortional buckling mode	115742
Zhang, Jianxun / Guo, Haoyuan	Large deflection of rectangular sandwich tubes with metal foam core	115745
Han, Dong / Ren, Xin / Zhang, Yi / Zhang, Xiang Yu / Zhang, Xue Gang / Luo, Chen / Xie, Yi Min	Lightweight auxetic metamaterials: Design and characteristic study	115706
Liu, Hui / Chen, Lianxiong / Shi, Tielin / Xia, Qi	M-VCUT level set method for the layout and shape optimization of stiffeners in plate	115614
Xian, Guijun / Guo, Rui / Li, Chenggao / Wang, Yunjia	Mechanical performance evolution and life prediction of prestressed CFRP plate exposed to hygrothermal and freeze-thaw environments	115719
Kumar, Vikash / Dewangan, Hukum Chand / Sharma, Nitin / Panda, Subrata Kumar	Numerical frequency and SERR response of damaged (crack/delamination) multilayered composite under themomechanical loading: An experimental verification	115709
Zhao, Wei / Li, Nan / Liu, Liwu / Leng, Jinsong / Liu, Yanju	Origami derived self-assembly stents fabricated via 4D printing	115669
Zhang, Bo / Wu, Shihao / Yu, Jiangong / Wang, Peixin / Zhang, Xiaoming / Zhang, Yuemin	Propagation and attenuation of Lamb waves in functionally graded fractional viscoelastic soft plates with a pre-deformation	115727
Corradi, Marco / Speranzini, Emanuela / Molinari, Alessio	A repair method of cracked shear walls with stainless steel rods and fibres	115739
Boursier Niutta, Carlo	Residual elastic response in damaged woven laminates through local Impulse Excitation Technique	115723
Liao, JinJing / Zeng, Jun-Jie / Jiang, Cheng / Li, Jia-Xing / Yuan, Jian-Song	Stress-strain behavior and design-oriented model for FRP spiral strip-confined concrete	115747
Wang, Yanda / Geng, Luchao / Lian, Yanping / Xu, Mengchuan / Fang, Daining	Three-dimensional assembled dual-material lattice with tailorable thermal expansion: Design method, modeling, and testing	115724
Kuo, Hsin-Yi / Wang, Yun-Hsuan	Wave motion of magneto-electro-elastic laminated plates with membrane-type interfacial imperfections	115661

Auteur(s)

Titre

Page(s)

Yue, Nan / Broer, Agnes / Briand, William / Rébillat, Marc / Loutas, Theodoros / Zarouchas, Dimitrios

Assessing stiffness degradation of stiffened composite panels in post-buckling compression-compression fatigue using guided waves

115751

Zhang, Peng / Tan, Siyuan / Hu, Xiaofei / Yao, Weian / Zhuang, Xiaoying

A double-phase field model for multiple failures in composites

115730

Sharma, Pranjali / Sharma, Shubhangi / Bera, Tapan / Semwal, Kaladhar / Badhe, Rajesh M. / Sharma, Alok / Kapur, Gurpreet Singh / Ramakumar, S. S. V. / Neogi, Swati

Effects of dome shape on burst and weight performance of a type-3 composite pressure vessel for storage of compressed hydrogen

115732

Chen, Yuan / Ye, Lin / Han, Xu

Experimental and numerical investigation of zero Poisson’s ratio structures achieved by topological design and 3D printing of SCF/PA

115717

Xue, Congcong / Yu, Min / Yang, Biying / Wang, Tan / Saafi, Mohamed / Ye, Jianqiao

Experimental and numerical study on tensile properties of bolted GFRP joints at high and low temperatures

115743

Castro, Oscar / Yeniceli, Süleyman Cem / Berring, Peter / Semenov, Sergei / Branner, Kim

Experimental demonstration of strain-based damage method for optimized fatigue testing of wind turbine blades

115683

Ye, Sang / Li, Min / Zhang, Kaixuan / Zhao, Hong-Ping / Feng, Xi-Qiao