Composite Structures - septembre 2014

Publié:	septembre 2014

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Di Franco, G. / Zuccarello, B.	Analysis and optimization of hybrid double lap aluminum-GFRP joints	682-693
Baştürk, Süleyman / Uyanık, Haydar / Kazancı, Zafer	An analytical model for predicting the deflection of laminated basalt composite plates under dynamic loads	273-285
Sharos, P. A. / Egan, B. / McCarthy, C. T.	An analytical model for strength prediction in multi-bolt composite joints at various loading rates	300-310
Osei-Antwi, Michael / De Castro, Julia / Vassilopoulos, Anastasios P. / Keller, Thomas	Analytical modeling of local stresses at Balsa/timber core joints of FRP sandwich structures	501-508
Davì, Giuseppe / Milazzo, Alberto / Orlando, Calogero	An analytical solution for multilayered beams subjected to ends loads	772-781
Sebaey, T. A. / Mahdi, E.	Behavior of pyramidal lattice core sandwich CFRP composites under biaxial compression loading	67-74
Xiong, J. / Ghosh, R. / Ma, L. / Ebrahimi, H. / Hamouda, A. M. S. / Vaziri, A. / Wu, L.	Bending behavior of lightweight sandwich-walled shells with pyramidal truss cores	793-804
Li, H. / Dai, F. / Weaver, P. M. / Du, S.	Bistable hybrid symmetric laminates	782-792
Li, Li / Lomov, Stepan V. / Yan, Xiong / Carvelli, Valter	Cluster analysis of acoustic emission signals for 2D and 3D woven glass/epoxy composites	286-299
Guo, Yujie / Ruess, Martin / Gürdal, Zafer	A contact extended isogeometric layerwise approach for the buckling analysis of delaminated composites	55-66
Wenzel, C. / Vidal, P. / D'Ottavio, M. / Polit, O.	Coupling of heterogeneous kinematics and Finite Element approximations applied to composite beam structures	177-192
Lin, J. S. / Wang, X. / Lu, G.	Crushing characteristics of fiber reinforced conical tubes with foam-filler	18-28
Biscaia, Hugo C. / Micaelo, Rui / Teixeira, João / Chastre, Carlos	Delamination process analysis of FRP-to-parent material bonded joints with and without anchorage systems using the Distinct Element Method	104-119
Khashaba, U. A.	Development and characterization of high performance nano-hybrid GFRE composites for structural applications	523-534
Akbarzadeh, A. H. / Fu, J. W. / Chen, Z. T. / Qian, L. F.	Dynamic eigenstrain behavior of magnetoelastic functionally graded cellular cylinders	404-413
Li, Wei / Huang, Guangyan / Bai, Yang / Dong, Yongxiang / Feng, Shunshan	Dynamic response of spherical sandwich shells with metallic foam core under external air blast loading – Numerical simulation	612-625
Falcó, O. / Lopes, C. S. / Mayugo, J. A. / Gascons, N. / Renart, J.	Effect of tow-drop gaps on the damage resistance and tolerance of Variable-Stiffness Panels	94-103
Nilakantan, Gaurav / Nutt, Steven	Effects of fabric target shape and size on the V50 ballistic impact response of soft body armor	661-669
Sousa, João M. / Correia, João R. / Cabral-Fonseca, Susana / Diogo, António C.	Effects of thermal cycles on the mechanical response of pultruded GFRP profiles used in civil engineering applications	720-731
Massabó, Roberta / Campi, Francesca	An efficient approach for multilayered beams and wide plates with imperfect interfaces and delaminations	311-324
Zhou, J. / Guan, Z. W. / Cantwell, W. J. / Liao, Y.	The energy-absorbing behaviour of foam cores reinforced with composite rods	346-356
Xie, Wei / Jiang, Meirong / Chen, Hailong / Zhou, Jiannan / Xu, Ying / Wang, Peng / Fan, Hualin / Jin, Fengnian	Experimental behaviors of CFRP cloth strengthened buried arch structure subjected to subsurface localized explosion	562-570
Zhou, Yinzhi / Fan, Hualin / Jiang, KeBin / Gou, Mingkang / Li, Ning / Zhu, Pengcheng / Tu, Yiqiang	Experimental flexural behaviors of CFRP strengthened aluminum beams	761-771
Priem, Cyril / Othman, Ramzi / Rozycki, Patrick / Guillon, Damien	Experimental investigation of the crash energy absorption of 2.5D-braided thermoplastic composite tubes	814-826
Liu, Jiayi / Zhu, Xiang / Li, Tianyun / Zhou, Zhengong / Wu, Linzhi / Ma, Li	Experimental study on the low velocity impact responses of all-composite pyramidal truss core sandwich panel after high temperature exposure	670-681
Lou, Tiejiong / Lopes, Sergio M. R. / Lopes, Adelino V.	Flexure of continuous HSC beams with external CFRP tendons: Effects of fibre elastic modulus and steel ratio	29-37
Akbari, M. / Kiani, Y. / Aghdam, M. M. / Eslami, M. R.	Free vibration of FGM Lévy conical panels	732-746
Yu, J. G. / Lefebvre, J. E. / Zhang, Ch.	Guided wave in multilayered piezoelectric–piezomagnetic bars with rectangular cross-sections	336-345
Bacigalupo, Andrea / Gambarotta, Luigi	Homogenization of periodic hexa- and tetrachiral cellular solids	461-476
Aktaş, Alaattin / Aktas, Mehmet / Turan, Fatih	Impact and post impact (CAI) behavior of stitched woven–knit hybrid composites	243-253
Kim, H. K. / Park, I. S. / Lee, H. K.	Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water–binder ratio	713-719
Santiuste, C. / Rodríguez-Millán, M. / Giner, E. / Miguélez, H.	The influence of anisotropy in numerical modeling of orthogonal cutting of cortical bone	423-431
Rezazadeh, Mohammadali / Costa, Ines / Barros, Joaquim	Influence of prestress level on NSM CFRP laminates for the flexural strengthening of RC beams	489-500
Rajabi, Majid / Behzad, Mehdi	Interaction of a plane progressive sound wave with anisotropic cylindrical shells	747-760
Tornabene, Francesco / Fantuzzi, Nicholas / Bacciocchi, Michele	The local GDQ method applied to general higher-order theories of doubly-curved laminated composite shells and panels: The free vibration analysis	637-660
Antoine, G. O. / Batra, R. C.	Low speed impact of laminated polymethylmethacrylate/adhesive/polycarbonate plates	193-210
Naouar, N. / Vidal-Salle, E. / Schneider, J. / Maire, E. / Boisse, P.	Meso-scale FE analyses of textile composite reinforcement deformation based on X-ray computed tomography	165-176
Arteiro, A. / Catalanotti, G. / Melro, A. R. / Linde, P. / Camanho, P. P.	Micro-mechanical analysis of the in situ effect in polymer composite laminates	827-840
Barbero, E. J. / Madeo, A. / Zagari, G. / Zinno, R. / Zucco, G.	A mixed isostatic 24 dof element for static and buckling analysis of laminated folded plates	223-234
Osei-Antwi, Michael / De Castro, Julia / Vassilopoulos, Anastasios P. / Keller, Thomas	Modeling of axial and shear stresses in multilayer sandwich beams with stiff core layers	453-460
Akula, Venkata M. K.	Multiscale reliability analysis of a composite stiffened panel	432-440
Kiani, Keivan	Nanoparticle delivery via stocky single-walled carbon nanotubes: A nonlinear-nonlocal continuum-based scrutiny	254-272
Setoodeh, A. R. / Afrahim, S.	Nonlinear dynamic analysis of FG micro-pipes conveying fluid based on strain gradient theory	128-135
Asemi, S. R. / Farajpour, A. / Mohammadi, M.	Nonlinear vibration analysis of piezoelectric nanoelectromechanical resonators based on nonlocal elasticity theory	703-712
Harvey, C. M. / Wood, J. D. / Wang, S. / Watson, A.	A novel method for the partition of mixed-mode fractures in 2D elastic laminated unidirectional composite beams	589-594
Ramezani Dana, H. / Jacquemin, F. / Freour, S. / Perronnet, A. / Casari, P. / Lupi, C.	Numerical and experimental investigation of hygro mechanical states of glass fiber reinforced polyester composites experienced by FBG sensors	38-47
Würkner, Mathias / Berger, Harald / Gabbert, Ulrich	Numerical investigations of effective properties of fiber reinforced composites with parallelogram arrangements and imperfect interface	388-394
Kwon, Y. W. / Plessas, S. D.	Numerical modal analysis of composite structures coupled with water	325-335
Peret, T. / Clément, A. / Freour, S. / Jacquemin, F.	Numerical transient hygro-elastic analyses of reinforced Fickian and non-Fickian polymers	395-403
Silva, Manuel A. G. / Sena da Fonseca, B. / Biscaia, Hugo	On estimates of durability of FRP based on accelerated tests	377-387
Arrieta, Andres F. / Kuder, Izabela K. / Rist, Mathias / Waeber, Tobias / Ermanni, Paolo	Passive load alleviation aerofoil concept with variable stiffness multi-stable composites	235-242
Xing, Y. F. / Chen, L.	Physical interpretation of multiscale asymptotic expansion method	694-702
Lin, Chien-Hong / Muliana, Anastasia	Polarization switching responses of 1–3 and 0–3 active composites	535-551
Matadi Boumbimba, R. / Froustey, C. / Viot, P. / Olive, J. M. / Leonardi, F. / Gérard, P. / Inoubli, R.	Preparation and mechanical characterisation of laminate composites made of glass fibre/epoxy resin filled with tri bloc copolymers	414-422
Zhao, Libin / Gong, Yu / Zhang, Jianyu / Chen, Yuli / Fei, Binjun	Simulation of delamination growth in multidirectional laminates under mode I and mixed mode I/II loadings using cohesive elements	509-522
Vanaerschot, Andy / Cox, Brian N. / Lomov, Stepan V. / Vandepitte, Dirk	Simulation of the cross-correlated positions of in-plane tow centroids in textile composites based on experimental data	75-83
Li, Anqing / Zhou, Shenjie / Zhou, Shasha / Wang, Binglei	Size-dependent analysis of a three-layer microbeam including electromechanical coupling	120-127
Taati, Ehsan / Molaei Najafabadi, Masoud / Reddy, J. N.	Size-dependent generalized thermoelasticity model for Timoshenko micro-beams based on strain gradient and non-Fourier heat conduction theories	595-611
Le-Manh, Tuan / Lee, Jaehong	Stacking sequence optimization for maximum strengths of laminated composite plates using genetic algorithm and isogeometric analysis	357-363
Wang, Yu / Wang, Xinwei	Static analysis of higher order sandwich beams by weak form quadrature element method	841-848
Zhou, Yinhua / Yazdani-Nezhad, Hamed / McCarthy, M. A. / Wan, XiaoPeng / McCarthy, Conor	A study of intra-laminar damage in double-lap, multi-bolt, composite joints with variable clearance using continuum damage mechanics	441-452
Sahmani, S. / Bahrami, M. / Ansari, R.	Surface energy effects on the free vibration characteristics of postbuckled third-order shear deformable nanobeams	552-561
Rettenwander, Thomas / Fischlschweiger, Michael / Machado, Martín / Steinbichler, Georg / Major, Zoltán	Tailored patch placement on a base load carrying laminate: A computational structural optimisation with experimental validation	48-54
Jia, X. L. / Zhang, S. M. / Ke, L. L. / Yang, J. / Kitipornchai, S.	Thermal effect on the pull-in instability of functionally graded micro-beams subjected to electrical actuation	136-146
Sepehry, Naserodin / Bakhtiari-Nejad, Firooz / Shamshirsaz, Mahnaz	Thermo-electro-mechanical impedance based structural health monitoring of plates	147-164
Ke, L. L. / Wang, Y. S. / Reddy, J. N.	Thermo-electro-mechanical vibration of size-dependent piezoelectric cylindrical nanoshells under various boundary conditions	626-636
Ye, Tiangui / Jin, Guoyong / Su, Zhu	Three-dimensional vibration analysis of laminated functionally graded spherical shells with general boundary conditions	571-588
Shen, Hui-Shen	Torsional postbuckling of nanotube-reinforced composite cylindrical shells in thermal environments	477-488
Scarth, Carl / Cooper, Jonathan E. / Weaver, Paul M. / Silva, Gustavo H. C.	Uncertainty quantification of aeroelastic stability of composite plate wings using lamination parameters	84-93
Akmar, A. B. Ilyani / Lahmer, T. / Bordas, S. P. A. / Beex, L. A. A. / Rabczuk, T.	Uncertainty quantification of dry woven fabrics: A sensitivity analysis on material properties	1-17
Vargas Rojas, E. / Chapelle, D. / Perreux, D. / Delobelle, B. / Thiebaud, F.	Unified approach of filament winding applied to complex shape mandrels	805-813
Capozucca, Roberto	Vibration of CFRP cantilever beam with damage	211-222
Pimenta, Soraia / Robinson, Paul	Wavy-ply sandwich with composite skins and crushable core for ductility and energy absorption	364-376

Informations
sur cette fiche
IssueID
37872
Publié(e) le:
23.10.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - septembre 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - septembre 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.