Composite Structures - septembre 2015

Publié:	septembre 2015

Auteur(s)	Titre	Page(s)
Xiang, Ping / Zhang, L. W. / Liew, K. M.	Analysis of macromolecular microtubules using the potential-based matrix displacement method	224-230
Muñoz, R. / Martínez-Hergueta, F. / Gálvez, F. / González, C. / Llorca, J.	Ballistic performance of hybrid 3D woven composites: Experiments and simulations	141-151
Warren, Kyle C. / Lopez-Anido, Roberto A. / Goering, Jonathan	Behavior of three-dimensional woven carbon composites in single-bolt bearing	175-184
Zhen, Wu / Lo, S. H. / Xiaohui, Ren	A C0 zig-zag model for the analysis of angle-ply composite thick plates	211-223
Nezamabadi, Saeid / Potier-Ferry, Michel / Zahrouni, Hamid / Yvonnet, Julien	Compressive failure of composites: A computational homogenization approach	60-68
Pavlopoulou, S. / Grammatikos, S. A. / Kordatos, E. Z. / Worden, K. / Paipetis, A. S. / Matikas, T. E. / Soutis, C.	Continuous debonding monitoring of a patch repaired helicopter stabilizer: Damage assessment and analysis	231-244
Yin, Shuohui / Yu, Tiantang / Bui, Tinh Quoc / Xia, Shifeng / Hirose, Sohichi	A cutout isogeometric analysis for thin laminated composite plates using level sets	152-164
Katunin, Andrzej / Dragan, Krzysztof / Dziendzikowski, Michał	Damage identification in aircraft composite structures: A case study using various non-destructive testing techniques	1-9
Evingür, Gülşen Akın / Gülay Acar, F.	The effect of crosslinking to elasticity of cornea with various composite solutions	395-398
Gigliotti, Marco / Lafarie-Frenot, Marie Christine / Lin, Yueguo / Pugliese, Aldo	Electro-mechanical fatigue of CFRP laminates for aircraft applications	436-449
Vescovini, Riccardo / Dozio, Lorenzo	Exact refined buckling solutions for laminated plates under uniaxial and biaxial loads	356-368
Li, Yeou-Fong / Jobe, Ousman / Yu, Chung-Cheng / Chiu, Yu-Tsung	Experiment and analysis of bolted GFRP beam–beam connections	480-493
Biswal, M. / Sahu, S. K. / Asha, A. V.	Experimental and numerical studies on free vibration of laminated composite shallow shells in hygrothermal environment	165-174
Zubillaga, L. / Turon, A. / Renart, J. / Costa, J. / Linde, P.	An experimental study on matrix crack induced delamination in composite laminates	10-17
Zhai, Yunong / Li, Dongsheng / Li, Xiaoqiang / Wang, Liang / Yin, Yu	An experimental study on the effect of bolt-hole clearance and bolt torque on single-lap, countersunk composite joints	411-419
Montemurro, Marco	An extension of the polar method to the First-order Shear Deformation Theory of laminates	328-339
Han, Min-Gu / Chang, Seung-Hwan	Failure analysis of a Type III hydrogen pressure vessel under impact loading induced by free fall	288-297
Kapidžić, Zlatan / Ansell, Hans / Schön, Joakim / Simonsson, Kjell	Fatigue bearing failure of CFRP composite in biaxially loaded bolted joints at elevated temperature	298-307
Thawre, M. M. / Pandey, K. N. / Dubey, A. / Verma, K. K. / Peshwe, D. R. / Paretkar, R. K. / Jagannathan, N. / Manjunatha, C. M.	Fatigue life of a carbon fiber composite T-joint under a standard fighter aircraft spectrum load sequence	260-266
Alfonso, I. / Navarro, O. / Vargas, J. / Beltrán, A. / Aguilar, C. / González, G. / Figueroa, I. A.	FEA evaluation of the Al4C3 formation effect on the Young’s modulus of carbon nanotube reinforced aluminum matrix composites	420-425
Sartorato, Murilo / de Medeiros, Ricardo / Tita, Volnei	A finite element formulation for smart piezoelectric composite shells: Mathematical formulation, computational analysis and experimental evaluation	185-198
Lei, Z. X. / Zhang, L. W. / Liew, K. M.	Free vibration analysis of laminated FG-CNT reinforced composite rectangular plates using the kp-Ritz method	245-259
Rao, M. N. / Schmidt, R. / Schröder, K.-U.	Geometrically nonlinear static FE-simulation of multilayered magneto-electro-elastic composite structures	120-131
Gafforelli, Giacomo / Ardito, Raffaele / Corigliano, Alberto	Improved one-dimensional model of piezoelectric laminates for energy harvesters including three dimensional effects	369-381
Borosnyói, Adorján	Influence of service temperature and strain rate on the bond performance of CFRP reinforcement in concrete	18-27
Yang, Seunghwa / Choi, Joonmyung / Cho, Maenghyo	Intrinsic defect-induced tailoring of interfacial shear strength in CNT/polymer nanocomposites	108-119
Sankar, A. / Natarajan, S. / Ben Zineb, T. / Ganapathi, M.	Investigation of supersonic flutter of thick doubly curved sandwich panels with CNT reinforced facesheets using higher-order structural theory	340-355
Carra, Guglielmo / Carvelli, Valter	Long-term bending performance and service life prediction of pultruded Glass Fibre Reinforced Polymer composites	308-315
Askarinejad, Sina / Rahbar, Nima / Sabelkin, Volodymyr / Mall, Shankar	Mechanical behavior of a notched oxide/oxide ceramic matrix composite in combustion environment: Experiments and simulations	77-86
Remacha, M. / Sánchez-Saez, S. / López-Romano, B. / Barbero, E.	A new device for determining the compression after impact strength in thin laminates	99-107
Cerracchio, Priscilla / Gherlone, Marco / Di Sciuva, Marco / Tessler, Alexander	A novel approach for displacement and stress monitoring of sandwich structures based on the inverse Finite Element Method	69-76
Yeh, Fang-Yao / Chang, Kuo-Chun / Sung, Yu-Chi / Hung, Hsiao-Hui / Chou, Chung-Che	A novel composite bridge for emergency disaster relief: Concept and verification	199-210
Capozucca, R. / Blasi, M. G. / Corina, V.	NSM technique: Bond of CFRP rods and static/dynamic response of strengthened RC beams	466-479
Torres, Mauricio / Collombet, Francis / Douchin, Bernard / Crouzeix, Laurent / Grunevald, Yves-Henri	Numerical and experimental value added of Multi-Instrumented Technological Evaluator for the analysis of thick monolithic composite structures with singularity details	41-50
Barbaraci, Gabriele	On the dualism of voltage oscillations and kinematical variables of a 1D-beam piezofilm	399-410
Ni, C. Y. / Hou, R. / Xia, H. Y. / Zhang, Q. C. / Wang, W. B. / Cheng, Z. H. / Lu, T. J.	Perforation resistance of corrugated metallic sandwich plates filled with reactive powder concrete: Experiment and simulation	426-435
Yu, Hang / Heider, Dirk / Advani, Suresh	Prediction of effective through-thickness thermal conductivity of woven fabric reinforced composites with embedded particles	132-140
Correia, João R. / Bai, Yu / Keller, Thomas	A review of the fire behaviour of pultruded GFRP structural profiles for civil engineering applications	267-287
Ye, Tiangui / Jin, Guoyong / Ye, Xinmao / Wang, Xueren	A series solution for the vibrations of composite laminated deep curved beams with general boundaries	450-465
Ansari, R. / Gholami, R. / Faghih Shojaei, M. / Mohammadi, V. / Darabi, M. A.	Size-dependent nonlinear bending and postbuckling of functionally graded Mindlin rectangular microplates considering the physical neutral plane position	87-98
Murthy, M. V. V. S. / Renji, K. / Gopalakrishnan, S.	A spectral element for wave propagation in honeycomb sandwich construction considering core flexibility	28-40
Le-Anh, L. / Nguyen-Thoi, T. / Ho-Huu, V. / Dang-Trung, H. / Bui-Xuan, T.	Static and frequency optimization of folded laminated composite plates using an adjusted Differential Evolution algorithm and a smoothed triangular plate element	382-394
Altmann, Andreas / Gesell, Philipp / Drechsler, Klaus	Strength prediction of ply waviness in composite materials considering matrix dominated effects	51-59
Senthil, K. / Arockiarajan, A. / Palaninathan, R.	Structural behavior of composite cylindrical splice joint panels under axial compression: Experiments and numerical studies	316-327

Auteur(s)

Titre

Page(s)

Xiang, Ping / Zhang, L. W. / Liew, K. M.

Analysis of macromolecular microtubules using the potential-based matrix displacement method

224-230

Muñoz, R. / Martínez-Hergueta, F. / Gálvez, F. / González, C. / Llorca, J.

Ballistic performance of hybrid 3D woven composites: Experiments and simulations

141-151

Warren, Kyle C. / Lopez-Anido, Roberto A. / Goering, Jonathan

Behavior of three-dimensional woven carbon composites in single-bolt bearing

175-184

Zhen, Wu / Lo, S. H. / Xiaohui, Ren

A C0 zig-zag model for the analysis of angle-ply composite thick plates

211-223

Nezamabadi, Saeid / Potier-Ferry, Michel / Zahrouni, Hamid / Yvonnet, Julien

Compressive failure of composites: A computational homogenization approach

60-68

Pavlopoulou, S. / Grammatikos, S. A. / Kordatos, E. Z. / Worden, K. / Paipetis, A. S. / Matikas, T. E. / Soutis, C.

Continuous debonding monitoring of a patch repaired helicopter stabilizer: Damage assessment and analysis

231-244

Yin, Shuohui / Yu, Tiantang / Bui, Tinh Quoc / Xia, Shifeng / Hirose, Sohichi

A cutout isogeometric analysis for thin laminated composite plates using level sets

152-164

Katunin, Andrzej / Dragan, Krzysztof / Dziendzikowski, Michał

Damage identification in aircraft composite structures: A case study using various non-destructive testing techniques

1-9

Evingür, Gülşen Akın / Gülay Acar, F.

The effect of crosslinking to elasticity of cornea with various composite solutions

395-398

Gigliotti, Marco / Lafarie-Frenot, Marie Christine / Lin, Yueguo / Pugliese, Aldo

Electro-mechanical fatigue of CFRP laminates for aircraft applications

436-449

Vescovini, Riccardo / Dozio, Lorenzo

Exact refined buckling solutions for laminated plates under uniaxial and biaxial loads

356-368

Li, Yeou-Fong / Jobe, Ousman / Yu, Chung-Cheng / Chiu, Yu-Tsung

Experiment and analysis of bolted GFRP beam–beam connections

480-493

Biswal, M. / Sahu, S. K. / Asha, A. V.

Experimental and numerical studies on free vibration of laminated composite shallow shells in hygrothermal environment

165-174

Zubillaga, L. / Turon, A. / Renart, J. / Costa, J. / Linde, P.

An experimental study on matrix crack induced delamination in composite laminates

10-17

Zhai, Yunong / Li, Dongsheng / Li, Xiaoqiang / Wang, Liang / Yin, Yu

An experimental study on the effect of bolt-hole clearance and bolt torque on single-lap, countersunk composite joints

411-419

Montemurro, Marco

An extension of the polar method to the First-order Shear Deformation Theory of laminates

328-339

Han, Min-Gu / Chang, Seung-Hwan

Failure analysis of a Type III hydrogen pressure vessel under impact loading induced by free fall

288-297

Kapidžić, Zlatan / Ansell, Hans / Schön, Joakim / Simonsson, Kjell

Fatigue bearing failure of CFRP composite in biaxially loaded bolted joints at elevated temperature

298-307

Thawre, M. M. / Pandey, K. N. / Dubey, A. / Verma, K. K. / Peshwe, D. R. / Paretkar, R. K. / Jagannathan, N. / Manjunatha, C. M.

Fatigue life of a carbon fiber composite T-joint under a standard fighter aircraft spectrum load sequence

260-266

Alfonso, I. / Navarro, O. / Vargas, J. / Beltrán, A. / Aguilar, C. / González, G. / Figueroa, I. A.

FEA evaluation of the Al4C3 formation effect on the Young’s modulus of carbon nanotube reinforced aluminum matrix composites

420-425

Sartorato, Murilo / de Medeiros, Ricardo / Tita, Volnei

A finite element formulation for smart piezoelectric composite shells: Mathematical formulation, computational analysis and experimental evaluation

185-198

Lei, Z. X. / Zhang, L. W. / Liew, K. M.

Free vibration analysis of laminated FG-CNT reinforced composite rectangular plates using the kp-Ritz method

245-259

Rao, M. N. / Schmidt, R. / Schröder, K.-U.

Geometrically nonlinear static FE-simulation of multilayered magneto-electro-elastic composite structures

120-131

Gafforelli, Giacomo / Ardito, Raffaele / Corigliano, Alberto

Improved one-dimensional model of piezoelectric laminates for energy harvesters including three dimensional effects

369-381

Borosnyói, Adorján

Influence of service temperature and strain rate on the bond performance of CFRP reinforcement in concrete

18-27

Yang, Seunghwa / Choi, Joonmyung / Cho, Maenghyo

Intrinsic defect-induced tailoring of interfacial shear strength in CNT/polymer nanocomposites

108-119

Sankar, A. / Natarajan, S. / Ben Zineb, T. / Ganapathi, M.

Investigation of supersonic flutter of thick doubly curved sandwich panels with CNT reinforced facesheets using higher-order structural theory

340-355

Carra, Guglielmo / Carvelli, Valter

Long-term bending performance and service life prediction of pultruded Glass Fibre Reinforced Polymer composites

308-315

Askarinejad, Sina / Rahbar, Nima / Sabelkin, Volodymyr / Mall, Shankar

Mechanical behavior of a notched oxide/oxide ceramic matrix composite in combustion environment: Experiments and simulations

77-86

Remacha, M. / Sánchez-Saez, S. / López-Romano, B. / Barbero, E.

A new device for determining the compression after impact strength in thin laminates

99-107

Cerracchio, Priscilla / Gherlone, Marco / Di Sciuva, Marco / Tessler, Alexander

A novel approach for displacement and stress monitoring of sandwich structures based on the inverse Finite Element Method

69-76

Yeh, Fang-Yao / Chang, Kuo-Chun / Sung, Yu-Chi / Hung, Hsiao-Hui / Chou, Chung-Che

A novel composite bridge for emergency disaster relief: Concept and verification

199-210

Capozucca, R. / Blasi, M. G. / Corina, V.

NSM technique: Bond of CFRP rods and static/dynamic response of strengthened RC beams

466-479

Torres, Mauricio / Collombet, Francis / Douchin, Bernard / Crouzeix, Laurent / Grunevald, Yves-Henri

Numerical and experimental value added of Multi-Instrumented Technological Evaluator for the analysis of thick monolithic composite structures with singularity details

41-50

Barbaraci, Gabriele

On the dualism of voltage oscillations and kinematical variables of a 1D-beam piezofilm

399-410

Ni, C. Y. / Hou, R. / Xia, H. Y. / Zhang, Q. C. / Wang, W. B. / Cheng, Z. H. / Lu, T. J.

Perforation resistance of corrugated metallic sandwich plates filled with reactive powder concrete: Experiment and simulation

426-435

Yu, Hang / Heider, Dirk / Advani, Suresh

Prediction of effective through-thickness thermal conductivity of woven fabric reinforced composites with embedded particles

132-140

Correia, João R. / Bai, Yu / Keller, Thomas

A review of the fire behaviour of pultruded GFRP structural profiles for civil engineering applications

267-287

Ye, Tiangui / Jin, Guoyong / Ye, Xinmao / Wang, Xueren

A series solution for the vibrations of composite laminated deep curved beams with general boundaries

450-465

Ansari, R. / Gholami, R. / Faghih Shojaei, M. / Mohammadi, V. / Darabi, M. A.

Size-dependent nonlinear bending and postbuckling of functionally graded Mindlin rectangular microplates considering the physical neutral plane position

87-98

Murthy, M. V. V. S. / Renji, K. / Gopalakrishnan, S.

A spectral element for wave propagation in honeycomb sandwich construction considering core flexibility

28-40

Le-Anh, L. / Nguyen-Thoi, T. / Ho-Huu, V. / Dang-Trung, H. / Bui-Xuan, T.

Static and frequency optimization of folded laminated composite plates using an adjusted Differential Evolution algorithm and a smoothed triangular plate element

382-394

Altmann, Andreas / Gesell, Philipp / Drechsler, Klaus

Strength prediction of ply waviness in composite materials considering matrix dominated effects

51-59

Senthil, K. / Arockiarajan, A. / Palaninathan, R.

Structural behavior of composite cylindrical splice joint panels under axial compression: Experiments and numerical studies

316-327

Publicité

Composite Structures - septembre 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - septembre 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.