Composite Structures - janvier 2017

Publié:	janvier 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Tanks, Jonathon / Rader, Katherine / Sharp, Stephen / Sakai, Takenobu	Accelerated creep and creep-rupture testing of transverse unidirectional carbon/epoxy lamina based on the stepped isostress method	455-462
Chu, Tuan-Long / Ha-Minh, Cuong / Imad, Abdellatif	Analysis of local and global localizations on the failure phenomenon of 3D interlock woven fabrics under ballistic impact	267-277
Ding, Lan / Zhu, Hong-Ping / Wu, Li	Analysis of mechanical properties of laminated rubber bearings based on transfer matrix method	390-396
Isaksson, P. / Carlsson, L. A.	Analysis of the out-of-plane compression and shear response of paper-based web-core sandwiches subject to large deformation	96-109
Dung, Dao Van / Chan, Do Quang	Analytical investigation on mechanical buckling of FGM truncated conical shells reinforced by orthogonal stiffeners based on FSDT	827-841
Gu, Liangxian / Wang, Yifan / Shi, Shengbo / Dai, Cunxi	An approach for bending and transient dynamic analysis of integrated thermal protection system with temperature-dependent material properties	128-143
Lopatin, A. V. / Morozov, E. V. / Shatov, A. V.	Buckling of the composite anisogrid lattice plate with clamped edges under shear load	72-80
Wang, Dan / Abdalla, Mostafa M. / Zhang, Weihong	Buckling optimization design of curved stiffeners for grid-stiffened composite structures	656-666
Mania, Radoslaw J. / York, Christopher Bronn	Buckling strength improvements for Fibre Metal Laminates using thin-ply tailoring	424-432
Esmaeeli, Esmaeel / Danesh, Fakhreddin / Tee, Kong Fah / Eshghi, Sassan	A combination of GFRP sheets and steel cage for seismic strengthening of shear-deficient corner RC beam-column joints	206-219
Zhang, Chao / Curiel-Sosa, J. L. / Bui, Tinh Quoc	Comparison of periodic mesh and free mesh on the mechanical properties prediction of 3D braided composites	667-676
Baba, Buket Okutan	Curved sandwich composites with layer-wise graded cores under impact loads	1-11
Luo, Quantian / Tong, Liyong	A deformation mechanism based material model for topology optimization of laminated composite plates and shells	246-256
Yelve, Nitesh P. / Mitra, Mira / Mujumdar, P. M.	Detection of delamination in composite laminates using Lamb wave based nonlinear method	257-266
Na, Wongi S.	Distinguishing crack damage from debonding damage of glass fiber reinforced polymer plate using a piezoelectric transducer based nondestructive testing method	517-527
Tao, Chang / Fu, Yiming / Dai, Ting	Dynamic analysis for cracked fiber-metal laminated beams carrying moving loads and its application for wavelet based crack detection	463-470
Treviso, Alessandra / Mundo, Domenico / Tournour, Michel	Dynamic response of laminated structures using a Refined Zigzag Theory shell element	197-205
On, Seung Yoon / Kim, Moo Sun / Kim, Seong Su	Effects of post-treatment of meta-aramid nanofiber mats on the adhesion strength of epoxy adhesive joints	636-645
Nasirmanesh, Amir / Mohammadi, Soheil	Eigenvalue buckling analysis of cracked functionally graded cylindrical shells in the framework of the extended finite element method	548-566
Li, Hao / Qin, Xuda / He, Gaiyun / Price, Mark A. / Jin, Yan / Sun, Dan	An energy based force prediction method for UD-CFRP orthogonal machining	34-43
Elias, A. / Laurin, F. / Kaminski, M. / Gornet, L.	Experimental and numerical investigations of low energy/velocity impact damage generated in 3D woven composite with polymer matrix	228-239
Yao, Liaojun / Sun, Yi / Alderliesten, R. C. / Benedictus, R. / Zhao, MeiYing	Fibre bridging effect on the Paris relation for mode I fatigue delamination growth in composites with consideration of interface configuration	471-478
Mostafa, Nawras H. / Ismarrubie, Z. N. / Sapuan, S. M. / Sultan, M. T. H.	Fibre prestressed composites: Theoretical and numerical modelling of unidirectional and plain-weave fibre reinforcement forms	410-423
Liao, B. B. / Liu, P. F.	Finite element analysis of dynamic progressive failure of plastic composite laminates under low velocity impact	567-578
Chen, Youming / Das, Raj / Battley, Mark	Finite element analysis of the compressive and shear responses of structural foams using computed tomography	784-799
Muttashar, Majid / Manalo, Allan / Karunasena, Warna / Lokuge, Weena	Flexural behaviour of multi-celled GFRP composite beams with concrete infill: Experiment and theoretical analysis	21-33
Song, Mitao / Kitipornchai, Sritawat / Yang, Jie	Free and forced vibrations of functionally graded polymer composite plates reinforced with graphene nanoplatelets	579-588
Kiani, Y.	Free vibration of FG-CNT reinforced composite spherical shell panels using Gram-Schmidt shape functions	368-381
Gajewski, Jakub / Golewski, Przemysław / Sadowski, Tomasz	Geometry optimization of a thin-walled element for an air structure using hybrid system integrating artificial neural network and finite element method	589-599
Vo-Duy, T. / Ho-Huu, V. / Do-Thi, T. D. / Dang-Trung, H. / Nguyen-Thoi, T.	A global numerical approach for lightweight design optimization of laminated composite plates subjected to frequency constraints	646-655
Yu, Tian-Jun / Zhou, Sha / Yang, Xiao-Dong / Zhang, Wei	Homoclinic orbits and chaos of a supercritical composite panel with free-layer damping treatment in subsonic flow	288-298
Mehboob, Hassan / Kim, Jinha / Mehboob, Ali / Chang, Seung-Hwan	How post-operative rehabilitation exercises influence the healing process of radial bone shaft fractures fixed by a composite bone plate	307-315
Ebrahimi, Farzad / Barati, Mohammad Reza	Hygrothermal effects on vibration characteristics of viscoelastic FG nanobeams based on nonlocal strain gradient theory	433-444
Santiago, Rafael / Cantwell, Wesley / Alves, Marcilio	Impact on thermoplastic fibre-metal laminates: Experimental observations	800-817
Fitriah, S. N. / Abdul Majid, M. S. / Ridzuan, M. J. M. / Daud, R. / Gibson, A. G. / Assaleh, T. A.	Influence of hydrothermal ageing on the compressive behaviour of glass fibre/epoxy composite pipes	350-360
Zhang, Huawen / Smith, Scott T.	Influence of plate length and anchor position on FRP-to-concrete joints anchored with FRP anchors	615-624
de Macedo, Rafael Quelho / Ferreira, Rafael Thiago Luiz / Guedes, José Miranda / Donadon, Maurício Vicente	Intraply failure criterion for unidirectional fiber reinforced composites by means of asymptotic homogenization	335-349
Giasin, Khaled / Ayvar-Soberanis, Sabino	An Investigation of burrs, chip formation, hole size, circularity and delamination during drilling operation of GLARE using ANOVA	745-760
Le-Manh, T. / Huynh-Van, Q. / Phan, Thu D. / Phan, Huan D. / Nguyen-Xuan, H.	Isogeometric nonlinear bending and buckling analysis of variable-thickness composite plate structures	818-826
Zhao, Zhongbo / Teng, Kunyue / Li, Nan / Li, Xiaojie / Xu, Zhiwei / Chen, Lei / Niu, Jiarong / Fu, Hongjun / Zhao, Lihuan / Liu, Ya	Mechanical, thermal and interfacial performances of carbon fiber reinforced composites flavored by carbon nanotube in matrix/interface	761-772
Ray, M. C.	Mesh free model of nanobeam integrated with a flexoelectric actuator layer	63-71
Koutsawa, Yao / Tiem, Sonnou / Yu, Wenbin / Addiego, Frédéric / Giunta, Gaetano	A micromechanics approach for effective elastic properties of nano-composites with energetic surfaces/interfaces	278-287
Turant, Jan	Modeling and numerical evaluation of effective thermal conductivities of fibre functionally graded materials	240-245
Hubert, Debski / Tomasz, Sadowski	Modelling of the damage process of interfaces inside the WC/Co composite microstructure: 2-D versus 3-D modelling technique	121-127
Nam, Soohyun / Lee, Dongyoung / Lee, Dai Gil / Kim, Jinwhan	Nano carbon/fluoroelastomer composite bipolar plate for a vanadium redox flow battery (VRFB)	220-227
Wu, C. / Viquerat, A.	Natural frequency optimization of braided bistable carbon/epoxy tubes: Analysis of braid angles and stacking sequences	528-537
Sofiyev, A. H. / Karaca, Z. / Zerin, Z.	Non-linear vibration of composite orthotropic cylindrical shells on the non-linear elastic foundations within the shear deformation theory	53-62
Watts, Gaurav / Pradyumna, S. / Singha, M. K.	Nonlinear analysis of quadrilateral composite plates using moving kriging based element free Galerkin method	719-727
Ebrahimi, Farzad / Barati, Mohammad Reza	A nonlocal strain gradient refined beam model for buckling analysis of size-dependent shear-deformable curved FG nanobeams	174-182
van der Heijden, Sam / Daelemans, Lode / De Bruycker, Kevin / Simal, Robin / De Baere, Ives / Van Paepegem, Wim / Rahier, Hubert / De Clerck, Karen	Novel composite materials with tunable delamination resistance using functionalizable electrospun SBS fibers	12-20
Melo, Jose Daniel D. / Bi, Jing / Tsai, Stephen W.	A novel invariant-based design approach to carbon fiber reinforced laminates	44-52
Nayyeri, Mohammad Javad / Mirbagheri, Seyyed Mohammad Hossein / Haghshenas Fatmehsari, Davoud	Numerical evaluation of the stacking effect of spheres on the mechanics of tailor-made aluminum foams	316-326
Danzi, F. / Fanteria, D. / Panettieri, E. / Palermo, M.	A numerical micro-mechanical study of the influence of fiber–matrix interphase failure on carbon/epoxy material properties	625-635
Seemann, Ralf / Krause, Dieter	Numerical modelling of Nomex honeycomb sandwich cores at meso-scale level	702-718
Francesconi, L. / Aymerich, F.	Numerical simulation of the effect of stitching on the delamination resistance of laminated composites subjected to low-velocity impact	110-120
Vosoughi, A. R. / Darabi, A. / Dehghani Forkhorji, H.	Optimum stacking sequences of thick laminated composite plates for maximizing buckling load using FE-GAs-PSO	361-367
Bai, J. B. / Shenoi, R. A. / Yun, X. Y. / Xiong, J. J.	Progressive damage modelling of hybrid RTM-made composite Π-joint under four-point flexure using mixed failure criteria	327-334
Dal Monte, Andrea / De Betta, Stefano / Raciti Castelli, Marco / Benini, Ernesto	Proposal for a coupled aerodynamic–structural wind turbine blade optimization	144-156
Pölöskei, Tamás / Szekrényes, András	Quasi-periodic excitation in a delaminated composite beam	677-688
Ma, Cailong / Wang, Daiyu / Wang, Zhenyu	Seismic retrofitting of full-scale RC interior beam-column-slab subassemblies with CFRP wraps	397-409
Nefovska-Danilovic, Marija / Kolarevic, Nevenka / Marjanović, Miroslav / Petronijevic, Mira	Shear deformable dynamic stiffness elements for a free vibration analysis of composite plate assemblies – Part I: Theory	728-744
Marjanović, Miroslav / Kolarevic, Nevenka / Nefovska-Danilovic, Marija / Petronijevic, Mira	Shear deformable dynamic stiffness elements for a free vibration analysis of composite plate assemblies – Part II: Numerical examples	183-196
Barros, Joaquim A. O. / Rezazadeh, Mohammadali / Laranjeira, João P. S. / Hosseini, Mohammad R. M. / Mastali, Mohammad / Ramezansefat, Honeyeh	Simultaneous flexural and punching strengthening of RC slabs according to a new hybrid technique using U-shape CFRP laminates	600-614
Sutherland, L. S. / Amado, C. / Guedes Soares, C.	Statistical experimental design techniques to investigate the strength of adhesively bonded T-joints	445-454
Lacki, Piotr / Derlatka, Anna	Strength evaluation of beam made of the aluminum 6061-T6 and titanium grade 5 alloys sheets joined by RFSSW and RSW	491-497
Lacki, Piotr / Niemiro, Judyta	Strength evaluation of the beam made of the titanium sheets Grade 2 and Grade 5 welded by Resistance Spot Welding	538-547
Kianmofrad, F. / Ghafoori, E. / Elyasi, M. M. / Motavalli, M. / Rahimian, M.	Strengthening of metallic beams with different types of pre-stressed un-bonded retrofit systems	81-95
Fukada, Yoshiki	Stress redistribution as an effect of non-uniform in-plane laminate stresses in laminate composite plates	505-516
Katunin, Andrzej / Krukiewicz, Katarzyna / Turczyn, Roman / Sul, Przemysław / Łasica, Andrzej / Bilewicz, Marcin	Synthesis and characterization of the electrically conductive polymeric composite for lightning strike protection of aircraft structures	773-783
Patil, Deepak Rajaram / Chai, Yisheng / Jeon, Byung-Gu / Kambale, R. C. / Ryu, Jungho / Lee, Sang-Goo / Lee, Jeongho / Kim, Kee Hoon	Theoretical prediction of resonant and off-resonant magnetoelectric coupling in layered composites with anisotropic piezoelectric properties	498-504
Kiani, Y.	Thermal post-buckling of FG-CNT reinforced composite plates	299-306
Alagappan, P. / Rajagopal, K. R. / Srinivasa, A. R.	A three dimensional finite deformation viscoelastic model for a layered polymeric material subject to blast	382-389
Dong, Y. H. / Li, Y. H.	A unified nonlinear analytical solution of bending, buckling and vibration for the temperature-dependent FG rectangular plates subjected to thermal load	689-701
Arefi, Mohammad / Zenkour, Ashraf M.	Vibration and bending analysis of a sandwich microbeam with two integrated piezo-magnetic face-sheets	479-490
Azrar, L. / El Ouafi, J. / Aljinaidi, A. A.	Viscoelectroelastic closed form models for frequency and time dependent effective properties of reinforced viscoelectroelastic composites	842-865
Wang, Xinwei / Yuan, Zhangxian	Weak form quadrature element analysis of sandwich panels with functionally graded soft-cores	157-173

Informations
sur cette fiche
IssueID
37829
Publié(e) le:
23.10.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - janvier 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - janvier 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.