Composite Structures - mars 2017

Publié:	mars 2017

Auteur(s)	Titre	Page(s)
Carvelli, Valter / D'Ettorre, Alessandro / Lomov, Stepan V.	Acoustic emission and damage mode correlation in textile reinforced PPS composites	399-409
Selim, B. A. / Zhang, L. W. / Liew, K. M.	Active vibration control of CNT-reinforced composite plates with piezoelectric layers based on Reddy’s higher-order shear deformation theory	350-364
Samborski, Sylwester	Analysis of the end-notched flexure test configuration applicability for mechanically coupled fiber reinforced composite laminates	342-349
Gaff, Milan / Gašparík, Miroslav / Babiak, Marian / Vokatý, Vojtěch	Bendability characteristics of wood lamellae in plastic region	410-422
Wang, Shanshuai / Li, Shuhui / He, Ji	Buckling behavior of sandwich hemispherical structure considering deformation modes under axial compression	312-324
Ahmed, Sameh / Galal, Khaled	Effectiveness of FRP sandwich panels for blast resistance	454-464
Amirpour, Maedeh / Das, Raj / Bickerton, Simon	An elasto-plastic damage model for functionally graded plates with in-plane material properties variation: Material model and numerical implementation	331-341
Atashipour, S. R. / Girhammar, U. A. / Al-Emrani, M.	Exact Lévy-type solutions for bending of thick laminated orthotropic plates based on 3-D elasticity and shear deformation theories	129-151
Lu, Lingling / Song, Hongwei / Huang, Chenguang	Experimental investigation of unbound nodes identification for metallic sandwich panels with truss core	248-256
Rajesh, M. / Pitchaimani, Jeyaraj	Experimental investigation on buckling and free vibration behavior of woven natural fiber fabric composite under axial compression	302-311
Cao, Qi / Jiang, Haibo / Wu, Zhimin / Ma, Zhongguo John	Experimental investigation on long term flexural performance of expansive concrete beams eccentrically reinforced by CFRP	101-113
Lou, Xiaofei / Cai, Hongneng / Yu, Pengfei / Jiao, Fei / Han, Xuecheng	Failure analysis of composite laminate under low-velocity impact based on micromechanics of failure	238-247
Al-Saadi, Nihad Tareq Khshain / Mohammed, Alyaa / Al-Mahaidi, Riadh	Fatigue performance of NSM CFRP strips embedded in concrete using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxide	44-62
Sladek, J. / Sladek, V. / Lu, H. H.-H. / Young, D. L.	The FEM analysis of FGM piezoelectric semiconductor problems	13-20
Rastgoo Moghadam, Saman / Konstantinidis, Dimitrios	Finite element study of the effect of support rotation on the horizontal behavior of elastomeric bearings	474-490
Lee, Hee Young / Jung, Woo Tai / Chung, Wonseok	Flexural strengthening of reinforced concrete beams with pre-stressed near surface mounted CFRP systems	1-12
Wu, Hao / Fan, Guohua / Huang, Meng / Geng, Lin / Cui, Xiping / Chen, Rongchang / Peng, Guanyun	Fracture behavior and strain evolution of laminated composites	123-128
Nurul Izyan, M. D. / Viswanathan, K. K. / Aziz, Z. A. / Lee, Jang Hyun / Prabakar, K.	Free vibration of layered truncated conical shells filled with quiescent fluid using spline method	385-398
Sari, Ma'en / Shaat, Mohamed / Abdelkefi, Abdessattar	Frequency and mode veering phenomena of axially functionally graded non-uniform beams with nonlocal residuals	280-292
Kattimani, S. C.	Geometrically nonlinear vibration analysis of multiferroic composite plates and shells	185-194
Nallim, Liz G. / Oller, Sergio / Oñate, Eugenio / Flores, Fernando G.	A hierarchical finite element for composite laminated beams using a refined zigzag theory	168-184
Montesano, John / Bougherara, Habiba / Fawaz, Zouheir	Influence of drilling and abrasive water jet induced damage on the performance of carbon fabric/epoxy plates with holes	257-266
Heieck, F. / Hermann, F. / Middendorf, P. / Schladitz, K.	Influence of the cover factor of 2D biaxial and triaxial braided carbon composites on their in-plane mechanical properties	114-122
Zhang, L. W. / Memar Ardestani, M. / Liew, K. M.	Isogeometric approach for buckling analysis of CNT-reinforced composite skew plates under optimal CNT-orientation	365-384
Qiu, Chengyu / Feng, Peng / Yang, Yue / Zhu, Lei / Bai, Yu	Joint capacity of bonded sleeve connections for tubular fibre reinforced polymer members	267-279
Li, Xin / Zhang, Xin / Zhang, He / Yang, Jinglei / Nia, Amin Bassiri / Chai, Gin Boay	Mechanical behaviors of Ti/CFRP/Ti laminates with different surface treatments of titanium sheets	21-31
García-Macías, Enrique / D'Alessandro, Antonella / Castro-Triguero, Rafael / Pérez-Mira, Domingo / Ubertini, Filippo	Micromechanics modeling of the uniaxial strain-sensing property of carbon nanotube cement-matrix composites for SHM applications	195-215
Fedulov, B. N. / Safonov, A. A. / Kantor, M. M. / Lomov, S. V.	Modelling of thermoplastic polymer failure in fiber reinforced composites	293-301
Gou, Jian-Jun / Fang, Wen-Zhen / Dai, Yan-Jun / Li, ShuGuang / Tao, Wen-Quan	Multi-size unit cells to predict effective thermal conductivities of 3D four-directional braided composites	152-167
Daud, Raid A. / Cunningham, Lee S. / Wang, Yong C.	New model for post-fatigue behaviour of CFRP to concrete bond interface in single shear	63-76
Zal, Vahid / Moslemi Naeini, Hassan / Sinke, Jos / Bahramian, Ahmad Reza / Abouhamzeh, Morteza / Benedictus, Rinze	A new procedure for Finite Element simulation of forming process of non-homogeneous composite laminates and FMLs	444-453
Dey, Tanish / Ramachandra, L. S.	Non-linear vibration analysis of laminated composite circular cylindrical shells	89-100
Keshtegar, Behrooz / Sadeghian, Pedram / Gholampour, Aliakbar / Ozbakkaloglu, Togay	Nonlinear modeling of ultimate strength and strain of FRP-confined concrete using chaos control method	423-431
Wang, Rongqiao / Zhang, Long / Hu, Dianyin / Liu, Chunhui / Shen, Xiuli / Cho, Chongdu / Li, Bo	A novel approach to impose periodic boundary condition on braided composite RVE model based on RPIM	77-88
Zhang, Chao / Curiel-Sosa, J. L. / Bui, Tinh Quoc	A novel interface constitutive model for prediction of stiffness and strength in 3D braided composites	32-43
Di Carlo, Fabio / Meda, Alberto / Rinaldi, Zila	Numerical cyclic behaviour of un-corroded and corroded RC columns reinforced with HPFRC jacket	432-443
Formisano, Antonio / Boccarusso, Luca / Durante, Massimo / Langella, Antonio	Punch tool based out-of-plane shear behaviour of GFRP composites	325-330
Xu, Yue / Chen, Xiaogang / Wang, Yan / Yuan, Zishun	Stabbing resistance of body armour panels impregnated with shear thickening fluid	465-473
Vinyas, M. / Kattimani, S. C.	Static studies of stepped functionally graded magneto-electro-elastic beam subjected to different thermal loads	216-237

Auteur(s)

Titre

Page(s)

Carvelli, Valter / D'Ettorre, Alessandro / Lomov, Stepan V.

Acoustic emission and damage mode correlation in textile reinforced PPS composites

399-409

Selim, B. A. / Zhang, L. W. / Liew, K. M.

Active vibration control of CNT-reinforced composite plates with piezoelectric layers based on Reddy’s higher-order shear deformation theory

350-364

Samborski, Sylwester

Analysis of the end-notched flexure test configuration applicability for mechanically coupled fiber reinforced composite laminates

342-349

Gaff, Milan / Gašparík, Miroslav / Babiak, Marian / Vokatý, Vojtěch

Bendability characteristics of wood lamellae in plastic region

410-422

Wang, Shanshuai / Li, Shuhui / He, Ji

Buckling behavior of sandwich hemispherical structure considering deformation modes under axial compression

312-324

Ahmed, Sameh / Galal, Khaled

Effectiveness of FRP sandwich panels for blast resistance

454-464

Amirpour, Maedeh / Das, Raj / Bickerton, Simon

An elasto-plastic damage model for functionally graded plates with in-plane material properties variation: Material model and numerical implementation

331-341

Atashipour, S. R. / Girhammar, U. A. / Al-Emrani, M.

Exact Lévy-type solutions for bending of thick laminated orthotropic plates based on 3-D elasticity and shear deformation theories

129-151

Lu, Lingling / Song, Hongwei / Huang, Chenguang

Experimental investigation of unbound nodes identification for metallic sandwich panels with truss core

248-256

Rajesh, M. / Pitchaimani, Jeyaraj

Experimental investigation on buckling and free vibration behavior of woven natural fiber fabric composite under axial compression

302-311

Cao, Qi / Jiang, Haibo / Wu, Zhimin / Ma, Zhongguo John

Experimental investigation on long term flexural performance of expansive concrete beams eccentrically reinforced by CFRP

101-113

Lou, Xiaofei / Cai, Hongneng / Yu, Pengfei / Jiao, Fei / Han, Xuecheng

Failure analysis of composite laminate under low-velocity impact based on micromechanics of failure

238-247

Al-Saadi, Nihad Tareq Khshain / Mohammed, Alyaa / Al-Mahaidi, Riadh

Fatigue performance of NSM CFRP strips embedded in concrete using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxide

44-62

Sladek, J. / Sladek, V. / Lu, H. H.-H. / Young, D. L.

The FEM analysis of FGM piezoelectric semiconductor problems

13-20

Rastgoo Moghadam, Saman / Konstantinidis, Dimitrios

Finite element study of the effect of support rotation on the horizontal behavior of elastomeric bearings

474-490

Lee, Hee Young / Jung, Woo Tai / Chung, Wonseok

Flexural strengthening of reinforced concrete beams with pre-stressed near surface mounted CFRP systems

1-12

Wu, Hao / Fan, Guohua / Huang, Meng / Geng, Lin / Cui, Xiping / Chen, Rongchang / Peng, Guanyun

Fracture behavior and strain evolution of laminated composites

123-128

Nurul Izyan, M. D. / Viswanathan, K. K. / Aziz, Z. A. / Lee, Jang Hyun / Prabakar, K.

Free vibration of layered truncated conical shells filled with quiescent fluid using spline method

385-398

Sari, Ma'en / Shaat, Mohamed / Abdelkefi, Abdessattar

Frequency and mode veering phenomena of axially functionally graded non-uniform beams with nonlocal residuals

280-292

Kattimani, S. C.

Geometrically nonlinear vibration analysis of multiferroic composite plates and shells

185-194

Nallim, Liz G. / Oller, Sergio / Oñate, Eugenio / Flores, Fernando G.

A hierarchical finite element for composite laminated beams using a refined zigzag theory

168-184

Montesano, John / Bougherara, Habiba / Fawaz, Zouheir

Influence of drilling and abrasive water jet induced damage on the performance of carbon fabric/epoxy plates with holes

257-266

Heieck, F. / Hermann, F. / Middendorf, P. / Schladitz, K.

Influence of the cover factor of 2D biaxial and triaxial braided carbon composites on their in-plane mechanical properties

114-122

Zhang, L. W. / Memar Ardestani, M. / Liew, K. M.

Isogeometric approach for buckling analysis of CNT-reinforced composite skew plates under optimal CNT-orientation

365-384

Qiu, Chengyu / Feng, Peng / Yang, Yue / Zhu, Lei / Bai, Yu

Joint capacity of bonded sleeve connections for tubular fibre reinforced polymer members

267-279

Li, Xin / Zhang, Xin / Zhang, He / Yang, Jinglei / Nia, Amin Bassiri / Chai, Gin Boay

Mechanical behaviors of Ti/CFRP/Ti laminates with different surface treatments of titanium sheets

21-31

García-Macías, Enrique / D'Alessandro, Antonella / Castro-Triguero, Rafael / Pérez-Mira, Domingo / Ubertini, Filippo

Micromechanics modeling of the uniaxial strain-sensing property of carbon nanotube cement-matrix composites for SHM applications

195-215

Fedulov, B. N. / Safonov, A. A. / Kantor, M. M. / Lomov, S. V.

Modelling of thermoplastic polymer failure in fiber reinforced composites

293-301

Gou, Jian-Jun / Fang, Wen-Zhen / Dai, Yan-Jun / Li, ShuGuang / Tao, Wen-Quan

Multi-size unit cells to predict effective thermal conductivities of 3D four-directional braided composites

152-167

Daud, Raid A. / Cunningham, Lee S. / Wang, Yong C.

New model for post-fatigue behaviour of CFRP to concrete bond interface in single shear

63-76

Zal, Vahid / Moslemi Naeini, Hassan / Sinke, Jos / Bahramian, Ahmad Reza / Abouhamzeh, Morteza / Benedictus, Rinze

A new procedure for Finite Element simulation of forming process of non-homogeneous composite laminates and FMLs

444-453

Dey, Tanish / Ramachandra, L. S.

Non-linear vibration analysis of laminated composite circular cylindrical shells

89-100

Keshtegar, Behrooz / Sadeghian, Pedram / Gholampour, Aliakbar / Ozbakkaloglu, Togay

Nonlinear modeling of ultimate strength and strain of FRP-confined concrete using chaos control method

423-431

Wang, Rongqiao / Zhang, Long / Hu, Dianyin / Liu, Chunhui / Shen, Xiuli / Cho, Chongdu / Li, Bo

A novel approach to impose periodic boundary condition on braided composite RVE model based on RPIM

77-88

Zhang, Chao / Curiel-Sosa, J. L. / Bui, Tinh Quoc

A novel interface constitutive model for prediction of stiffness and strength in 3D braided composites

32-43

Di Carlo, Fabio / Meda, Alberto / Rinaldi, Zila

Numerical cyclic behaviour of un-corroded and corroded RC columns reinforced with HPFRC jacket

432-443

Formisano, Antonio / Boccarusso, Luca / Durante, Massimo / Langella, Antonio

Punch tool based out-of-plane shear behaviour of GFRP composites

325-330

Xu, Yue / Chen, Xiaogang / Wang, Yan / Yuan, Zishun

Stabbing resistance of body armour panels impregnated with shear thickening fluid

465-473

Vinyas, M. / Kattimani, S. C.

Static studies of stepped functionally graded magneto-electro-elastic beam subjected to different thermal loads

216-237

Publicité

Composite Structures - mars 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - mars 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.