Composite Structures - février 2018

Publié:	février 2018

Auteur(s)	Titre	Page(s)
García-Macías, Enrique / Rodríguez-Tembleque, Luis / Sáez, Andrés	Bending and free vibration analysis of functionally graded graphene vs. carbon nanotube reinforced composite plates	123-138
Chronopoulos, D.	Calculation of guided wave interaction with nonlinearities and generation of harmonics in composite structures through a wave finite element method	375-384
Yudhanto, A. / Wafai, H. / Lubineau, G. / Yaldiz, R. / Verghese, N.	Characterizing the influence of matrix ductility on damage phenomenology in continuous fiber-reinforced thermoplastic laminates undergoing quasi-static indentation	324-334
Tarfaoui, M. / El Moumen, A. / Ben Yahia, H.	Damage detection versus heat dissipation in E-glass/Epoxy laminated composites under dynamic compression at high strain rate	50-61
Muc, Aleksander	Design of blended/tapered multilayered structures subjected to buckling constraints	256-266
Rizk, Georgio / Legrand, Vincent / Khalil, Khaled / Casari, Pascal / Jacquemin, Frédéric	Durability of sandwich composites under extreme conditions: Towards the prediction of fire resistance properties based on thermo-mechanical measurements	233-245
Mokhtari, M. / Permoon, M. R. / Haddadpour, H.	Dynamic analysis of isotropic sandwich cylindrical shell with fractional viscoelastic core using Rayleigh–Ritz method	165-174
Ho, Yu-Chien / Yanagimoto, Jun	Effect of unidirectional prepreg size on punching of pseudo-ductile CFRP laminates and CFRP/metal hybrid composites	246-255
Kiani, Y. / Mirzaei, M.	Enhancement of non-linear thermal stability of temperature dependent laminated beams with graphene reinforcements	114-122
Rescalvo, Francisco J. / Valverde-Palacios, Ignacio / Suarez, Elisabet / Gallego, Antolino	Experimental and analytical analysis for bending load capacity of old timber beams with defects when reinforced with carbon fiber strips	29-38
Thorsson, Solver I. / Sringeri, Sunil P. / Waas, Anthony M. / Justusson, Brian P. / Rassaian, Mostafa	Experimental investigation of composite laminates subject to low-velocity edge-on impact and compression after impact	335-346
Choi, Ik Hyeon	Finite element analysis of low-velocity impact response of convex and concave composite laminated shells	210-220
Chu, Liangliang / Dui, Guansuo / Ju, Chengjian	Flexoelectric effect on the bending and vibration responses of functionally graded piezoelectric nanobeams based on general modified strain gradient theory	39-49
Akbas, Seref Doguscan	Forced vibration analysis of functionally graded porous deep beams	293-302
Mercan, Kadir / Baltacıoğlu, Ali Kemal / Civalek, Ömer	Free vibration of laminated and FGM/CNT composites annular thick plates with shear deformation by discrete singular convolution method	139-153
O'Neill, Caoimhe / McPolin, Daniel / Taylor, Su E. / Martin, Tony / Harte, Annette M.	Glued-in basalt FRP rods under combined axial force and bending moment: An experimental study	267-273
Yilmaz, C. / Akalin, C. / Gunal, I. / Celik, H. / Buyuk, Murat / Suleman, A. / Yildiz, M.	A hybrid damage assessment for E-and S-glass reinforced laminated composite structures under in-plane shear loading	347-354
Habibi, Mohamed / Laperrière, Luc / Hassanabadi, Hojjat Mahi	Influence of low-velocity impact on residual tensile properties of nonwoven flax/epoxy composite	175-182
Borkowski, Luke / Kumar, Rajesh S.	Inverse method for estimation of composite kink-band toughness from open-hole compression strength data	183-192
Hasim, K. Ahmet	Isogeometric static analysis of laminated composite plane beams by using refined zigzag theory	365-374
Hosseini Kordkheili, S. A. / Soltani, Z.	A layerwise finite element for geometrically nonlinear analysis of composite shells	355-364
Sun, Wei / Guan, Zhidong / Li, Zengshan / Ouyang, Tian / Jiang, Ye	Modelling and simulating of the compressive behavior of T-stiffened composite panels subjected to stiffener impact	221-232
Banh, Thanh T. / Lee, Dongkyu	Multi-material topology optimization design for continuum structures with crack patterns	193-209
Sorrentino, L. / Turchetta, S. / Bellini, C.	A new method to reduce delaminations during drilling of FRP laminates by feed rate control	154-164
Sahmani, Saeid / Aghdam, Mohammad Mohammadi / Rabczuk, Timon	Nonlinear bending of functionally graded porous micro/nano-beams reinforced with graphene platelets based upon nonlocal strain gradient theory	68-78
Lin, Dejia / Wang, Di / Chen, Shunhua / Zang, Mengyan	Numerical simulations of impact fracture behavior of an automotive windshield glazing: An intrinsic cohesive approach	79-93
Son, Dae-Sung / Hyun, Jong-Min / Lee, Jung-Ryul / Lee, Won-Jun	Optimization of the design of radar-absorbing composite structures using response surface model with verification using scanning free space measurement	106-113
Kumar, Ambesh / Panda, Satyajit / Kumar, Ashish / Narsaria, Vivek	Performance of a graphite wafer-reinforced viscoelastic composite layer for active-passive damping of plate vibration	303-314
Hoffmann, Julian / Scharr, Gerhard	Pull-out performance of rectangular z-pins in hot-cured carbon fiber reinforced laminates	62-67
Leite, Bruno Martins / Leite, Luiz Fernando Martins / Reis, Vitor Luiz / Donadon, Maurício Vicente / Alves da Silveira, Nubia Nale	Strain rate effects on the intralaminar fracture toughness of composite laminates subjected to compressive load	94-105
Kou, Jianfeng / Xu, Fei / Xie, Wei / Zhang, Xiaoyu / Feng, Wei	A theoretical 4-stage shear model for single-lap torqued bolted-joint with clearances	1-16
El-Borgi, S. / Rajendran, P. / Friswell, M. I. / Trabelssi, M. / Reddy, J. N.	Torsional vibration of size-dependent viscoelastic rods using nonlocal strain and velocity gradient theory	274-292
Su, Zhu / Jin, Guoyong / Ye, Tiangui	Vibration analysis of multiple-stepped functionally graded beams with general boundary conditions	315-323
Liu, Zhihui / Niu, Junchuan	Vibrational energy flow model for functionally graded beams	17-28

Auteur(s)

Titre

Page(s)

García-Macías, Enrique / Rodríguez-Tembleque, Luis / Sáez, Andrés

Bending and free vibration analysis of functionally graded graphene vs. carbon nanotube reinforced composite plates

123-138

Chronopoulos, D.

Calculation of guided wave interaction with nonlinearities and generation of harmonics in composite structures through a wave finite element method

375-384

Yudhanto, A. / Wafai, H. / Lubineau, G. / Yaldiz, R. / Verghese, N.

Characterizing the influence of matrix ductility on damage phenomenology in continuous fiber-reinforced thermoplastic laminates undergoing quasi-static indentation

324-334

Tarfaoui, M. / El Moumen, A. / Ben Yahia, H.

Damage detection versus heat dissipation in E-glass/Epoxy laminated composites under dynamic compression at high strain rate

50-61

Muc, Aleksander

Design of blended/tapered multilayered structures subjected to buckling constraints

256-266

Rizk, Georgio / Legrand, Vincent / Khalil, Khaled / Casari, Pascal / Jacquemin, Frédéric

Durability of sandwich composites under extreme conditions: Towards the prediction of fire resistance properties based on thermo-mechanical measurements

233-245

Mokhtari, M. / Permoon, M. R. / Haddadpour, H.

Dynamic analysis of isotropic sandwich cylindrical shell with fractional viscoelastic core using Rayleigh–Ritz method

165-174

Ho, Yu-Chien / Yanagimoto, Jun

Effect of unidirectional prepreg size on punching of pseudo-ductile CFRP laminates and CFRP/metal hybrid composites

246-255

Kiani, Y. / Mirzaei, M.

Enhancement of non-linear thermal stability of temperature dependent laminated beams with graphene reinforcements

114-122

Rescalvo, Francisco J. / Valverde-Palacios, Ignacio / Suarez, Elisabet / Gallego, Antolino

Experimental and analytical analysis for bending load capacity of old timber beams with defects when reinforced with carbon fiber strips

29-38

Thorsson, Solver I. / Sringeri, Sunil P. / Waas, Anthony M. / Justusson, Brian P. / Rassaian, Mostafa

Experimental investigation of composite laminates subject to low-velocity edge-on impact and compression after impact

335-346

Choi, Ik Hyeon

Finite element analysis of low-velocity impact response of convex and concave composite laminated shells

210-220

Chu, Liangliang / Dui, Guansuo / Ju, Chengjian

Flexoelectric effect on the bending and vibration responses of functionally graded piezoelectric nanobeams based on general modified strain gradient theory

39-49

Akbas, Seref Doguscan

Forced vibration analysis of functionally graded porous deep beams

293-302

Mercan, Kadir / Baltacıoğlu, Ali Kemal / Civalek, Ömer

Free vibration of laminated and FGM/CNT composites annular thick plates with shear deformation by discrete singular convolution method

139-153

O'Neill, Caoimhe / McPolin, Daniel / Taylor, Su E. / Martin, Tony / Harte, Annette M.

Glued-in basalt FRP rods under combined axial force and bending moment: An experimental study

267-273

Yilmaz, C. / Akalin, C. / Gunal, I. / Celik, H. / Buyuk, Murat / Suleman, A. / Yildiz, M.

A hybrid damage assessment for E-and S-glass reinforced laminated composite structures under in-plane shear loading

347-354

Habibi, Mohamed / Laperrière, Luc / Hassanabadi, Hojjat Mahi

Influence of low-velocity impact on residual tensile properties of nonwoven flax/epoxy composite

175-182

Borkowski, Luke / Kumar, Rajesh S.

Inverse method for estimation of composite kink-band toughness from open-hole compression strength data

183-192

Hasim, K. Ahmet

Isogeometric static analysis of laminated composite plane beams by using refined zigzag theory

365-374

Hosseini Kordkheili, S. A. / Soltani, Z.

A layerwise finite element for geometrically nonlinear analysis of composite shells

355-364

Sun, Wei / Guan, Zhidong / Li, Zengshan / Ouyang, Tian / Jiang, Ye

Modelling and simulating of the compressive behavior of T-stiffened composite panels subjected to stiffener impact

221-232

Banh, Thanh T. / Lee, Dongkyu

Multi-material topology optimization design for continuum structures with crack patterns

193-209

Sorrentino, L. / Turchetta, S. / Bellini, C.

A new method to reduce delaminations during drilling of FRP laminates by feed rate control

154-164

Sahmani, Saeid / Aghdam, Mohammad Mohammadi / Rabczuk, Timon

Nonlinear bending of functionally graded porous micro/nano-beams reinforced with graphene platelets based upon nonlocal strain gradient theory

68-78

Lin, Dejia / Wang, Di / Chen, Shunhua / Zang, Mengyan

Numerical simulations of impact fracture behavior of an automotive windshield glazing: An intrinsic cohesive approach

79-93

Son, Dae-Sung / Hyun, Jong-Min / Lee, Jung-Ryul / Lee, Won-Jun

Optimization of the design of radar-absorbing composite structures using response surface model with verification using scanning free space measurement

106-113

Kumar, Ambesh / Panda, Satyajit / Kumar, Ashish / Narsaria, Vivek

Performance of a graphite wafer-reinforced viscoelastic composite layer for active-passive damping of plate vibration

303-314

Hoffmann, Julian / Scharr, Gerhard

Pull-out performance of rectangular z-pins in hot-cured carbon fiber reinforced laminates

62-67

Leite, Bruno Martins / Leite, Luiz Fernando Martins / Reis, Vitor Luiz / Donadon, Maurício Vicente / Alves da Silveira, Nubia Nale

Strain rate effects on the intralaminar fracture toughness of composite laminates subjected to compressive load

94-105

Kou, Jianfeng / Xu, Fei / Xie, Wei / Zhang, Xiaoyu / Feng, Wei

A theoretical 4-stage shear model for single-lap torqued bolted-joint with clearances

1-16

El-Borgi, S. / Rajendran, P. / Friswell, M. I. / Trabelssi, M. / Reddy, J. N.

Torsional vibration of size-dependent viscoelastic rods using nonlocal strain and velocity gradient theory

274-292

Su, Zhu / Jin, Guoyong / Ye, Tiangui

Vibration analysis of multiple-stepped functionally graded beams with general boundary conditions

315-323

Liu, Zhihui / Niu, Junchuan

Vibrational energy flow model for functionally graded beams

17-28

Publicité

Composite Structures - février 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - février 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.