Composite Structures - octobre 2018

Publié:	octobre 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Krzyzak, Aneta / Kucharczyk, Wojciech / Gaska, Jacek / Szczepaniak, Robert	Ablative test of composites with epoxy resin and expanded perlite	978-987
Moita, José S. / Araújo, Aurélio L. / Franco Correia, Victor / Soares, Cristóvão M. Mota / Herskovits, José	Active-passive damping in functionally graded sandwich plate/shell structures	324-332
Abdullah, Nur Azam / Curiel-Sosa, Jose Luis / Akbar, Mahesa	Aeroelastic assessment of cracked composite plate by means of fully coupled finite element and Doublet Lattice Method	151-161
Ding, Anxin / Wang, Jihui / Ni, Aiqing / Li, Shuxin	Ageing of sandwich composites with E-glass fibre/vinylester skins and PVC foam core in synergistic environmental agents	253-260
Lampani, L. / Sarasini, F. / Tirillò, J. / Gaudenzi, P.	Analysis of damage in composite laminates with embedded piezoelectric patches subjected to bending action	935-942
Adamus, Janina / Pomada, Marta	Analysis of heat flow in composite structures used in window installation	127-135
Jalón, E. / Hoang, T. / Rubio-López, A. / Santiuste, C.	Analysis of low-velocity impact on flax/PLA composites using a strain rate sensitive model	511-517
Akterskaia, Margarita / Jansen, Eelco / Hallett, Stephen R. / Weaver, Paul / Rolfes, Raimund	Analysis of skin-stringer debonding in composite panels through a two-way global-local method	1280-1294
Noh, Jungtae / Ghadimi, Behzad / Russo, Salvatore / Rosano, Michele	Assessment of FRP pultruded elements under static and dynamic loads	17-28
Loja, M. A. R. / Alves, M. S. F. / Bragança, I. M. F. / Rosa, R. S. B. / Barbosa, I. C. J. / Barbosa, J. I.	An assessment of thermally influenced and delamination-induced regions by composites drilling	413-423
Rong, Chong / Shi, Qingxuan	Axial-strength model for FRP-confined concrete based on the improved twin shear strength theory	102-110
Repka, M. / Sladek, V. / Sladek, J.	Bending of elastic plates with micro-voids	1155-1163
Iacobellis, Vincent / Radhi, Ali / Behdinan, Kamran	A bridging cell multiscale modeling of carbon nanotube-reinforced aluminum nanocomposites	406-412
Aydogdu, Metin / Gul, Ufuk	Buckling analysis of double nanofibers embeded in an elastic medium using doublet mechanics theory	355-363
Moita, José S. / Araújo, Aurélio L. / Franco Correia, Victor / Soares, Cristóvão M. Mota / Herskovits, José	Buckling and nonlinear response of functionally graded plates under thermo-mechanical loading	719-730
Aylikci, F. / Akbarov, S. D. / Yahnioglu, N.	Buckling delamination of a PZT/Metal/PZT sandwich rectangular thick plate containing interface inner band cracks	9-16
Yazdani, Nur / Beneberu, Eyosias / Mohiuddin, Ahmed Haider	CFRP retrofit of concrete circular columns: Evaluation of design guidelines	458-464
Choi, Jae-Hun / Nam, Young-Woo / Jang, Min-Su / Kim, Chun-Gon	Characteristics of silicon carbide fiber-reinforced composite for microwave absorbing structures	290-295
Lacki, Piotr / Derlatka, Anna / Kasza, Przemysław	Comparison of steel-concrete composite column and steel column	82-88
LomtePatil, Yashaswini T. / Kant, Tarun / Desai, Yogesh M.	Comparison of three dimensional elasticity solutions for functionally graded plates	424-435
Trauth, Anna / Weidenmann, Kay André	Continuous-discontinuous sheet moulding compounds – Effect of hybridisation on mechanical material properties	1087-1098
Lee, Kun-Joon / Lee, Jong-Han / Jung, Chi-Young / Choi, Eunsoo	Crack-closing performance of NiTi and NiTiNb fibers in cement mortar beams using shape memory effects	710-718
Gliszczynski, A. / Jakubczak, P. / Kubiak, T. / Bieniaś, J.	Damage assessment of channel section columns subjected to uniform compression	500-510
Cuynet, Amélie / Scida, Daniel / Roux, Émile / Toussaint, Franck / Ayad, Rezak / Lagache, Manuel	Damage characterisation of flax fibre fabric reinforced epoxy composites during low velocity impacts using high-speed imaging and Stereo Image Correlation	1186-1194
Venkatachalam, S. / Murthy, H.	Damage characterization and fatigue modeling of CFRP subjected to cyclic loading	1069-1077
Sikdar, Shirsendu / Ostachowicz, Wiesław / Pal, Joy	Damage-induced acoustic emission source identification in an advanced sandwich composite structure	860-866
Lee, Hak Gu / Lee, Jungwan	Damping mechanism model for fatigue testing of a full-scale composite wind turbine blade, Part 1: Modeling	1216-1228
Lee, Hak Gu / Lee, Jungwan	Damping mechanism model for fatigue testing of a full-scale composite wind turbine blade, Part 2: Application of fairing	1121-1125
Xu, Xiangyang / Yang, Hao / Neumann, Ingo	Deformation monitoring of typical composite structures based on terrestrial laser scanning technology	77-81
Zhang, Jianhua / Guan, Chengyu / Kang, Won-Hee / Tong, Lili / Xue, Qichao	Design, manufacturing and analysis of a ramie fiber triangular structure with the integral molding technology	967-977
Mahdi, E. / Eltai, E.	Development of cost-effective composite repair system for oil/gas pipelines	802-806
Tanks, Jonathon D. / Arao, Yoshihiko / Kubouchi, Masatoshi	Diffusion kinetics, swelling, and degradation of corrosion-resistant C-glass/epoxy woven composites in harsh environments	686-694
Hou, Xiaonan / Kanani, Armin Yousefi / Ye, Jianqiao	Double lap adhesive joint with reduced stress concentration: Effect of slot	635-642
Pazera, Ewelina / Jędrysiak, Jarosław	Effect of microstructure in thermoelasticity problems of functionally graded laminates	296-303
Melo, Arthur Bernardes Lara / Panzera, Tulio Hallak / Freire, Rodrigo Teixeira Santos / Scarpa, Fabrizio	The effect of Portland cement inclusions in hybrid glass fibre reinforced composites based on a full factorial design	233-240
Reis, J. M. L. / Lima, R. P. / Vidal, S. D.	Effect of rate and temperature on the mechanical properties of epoxy BADGE reinforced with carbon nanotubes	89-94
Foti, Federico / Gigliotti, Marco / Pannier, Yannick / Mellier, David / Lafarie-Frenot, Marie Christine	The effect of the environment on high temperature fatigue of cross-ply C/epoxy laminated composites	924-934
Bonfoh, Napo / Jeancolas, Antoine / Dinzart, Florence / Sabar, Hafid / Mihaluta, Marius	Effective thermal conductivity of composite ellipsoid assemblages with weakly conducting interfaces	603-614
Ozkutlu, Merve / Dilek, Cerag / Bayram, Goknur	Effects of hollow glass microsphere density and surface modification on the mechanical and thermal properties of poly(methyl methacrylate) syntactic foams	545-550
Sousa, João M. / Correia, João R. / Firmo, João P. / Cabral-Fonseca, Susana / Gonilha, José	Effects of thermal cycles on adhesively bonded joints between pultruded GFRP adherends	518-529
Wang, Yu / Feng, Chuang / Zhao, Zhan / Yang, Jie	Eigenvalue buckling of functionally graded cylindrical shells reinforced with graphene platelets (GPL)	38-46
Ghannadpour, S. A. M. / Mehrparvar, M.	Energy effect removal technique to model circular/elliptical holes in relatively thick composite plates under in-plane compressive load	1032-1041
Choi, Chunghyeon / Kim, YunHo / Sathish Kumar, Sarath Kumar / Kim, Chun-Gon	Enhanced resistance to atomic oxygen of OG POSS/epoxy nanocomposites	959-966
Oliveira, Lívia Á. / Santos, Júlio C. / Panzera, Túlio H. / Freire, Rodrigo T. S. / Vieira, Luciano M. G. / Scarpa, Fabrizio	' Evaluation of hybrid-short-coir-fibre-reinforced composites via full factorial design	313-323
Mazurkiewicz, Łukasz / Małachowski, Jerzy / Damaziak, Krzysztof / Tomaszewski, Michał	Evaluation of the response of fibre reinforced composite repair of steel pipeline subjected to puncture from excavator tooth	1126-1135
Díaz-Álvarez, A. / Rodríguez-Millán, M. / Díaz-Álvarez, J. / Miguélez, M. H.	Experimental analysis of drilling induced damage in aramid composites	1136-1144
Ribeiro, Marcelo L. / Ferreira, Gregório F. O. / de Medeiros, Ricardo / Ferreira, Antonio J. M. / Tita, Volnei	Experimental and numerical dynamic analysis of laminate plates via Carrera Unified Formulation	1176-1185
Teter, Andrzej / Gawryluk, Jarosław / Bocheński, Marcin	Experimental and numerical studies of a cracked thin-walled box-beams	807-817
Harhash, Mohamed / Gilbert, Rose Rogin / Hartmann, Stefan / Palkowski, Heinz	Experimental characterization, analytical and numerical investigations of metal/polymer/metal sandwich composites – Part 1: Deep drawing	1308-1321
Arslan, Kemal / Gunes, Recep	Experimental damage evaluation of honeycomb sandwich structures with Al/B4C FGM face plates under high velocity impact loads	304-312
Georgiou, Antroula V. / Pantazopoulou, Stavroula J.	Experimental investigation on the confining effect of fibers in SHFRCC	29-37
Atutis, Mantas / Valivonis, Juozas / Atutis, Edgaras	Experimental study of concrete beams prestressed with basalt fiber reinforced polymers. Part II: Stress relaxation phenomenon	344-354
Antony, Sheedev / Cherouat, Abel / Montay, Guillaume	Experimental, analytical and numerical analysis to investigate the tensile behaviour of hemp fibre yarns	482-490
Lee, Heeyoung / Jung, Woo Tai / Chung, Wonseok	Field test of an old RC bridge before and after NSM strengthening	793-801
Vinyas, M. / Kattimani, S. C.	Finite element evaluation of free vibration characteristics of magneto-electro-elastic rectangular plates in hygrothermal environment using higher-order shear deformation theory	1339-1352
Ulian, Gianfranco / Moro, Daniele / Valdrè, Giovanni	First principle investigation of the mechanical properties of natural layered nanocomposite: Clinochlore as a model system for heterodesmic structures	551-558
Turvey, G. J. / Zhang, Y-S.	Flexural moduli and end connection stiffnesses of symmetrically loaded GFRP beams for limit state serviceability design analysis	1164-1175
Joseph, R. P. / Zhang, Chunwei / Wang, B. L. / Samali, B.	Fracture analysis of flexoelectric double cantilever beams based on the strain gradient theory	1322-1329
Morozov, E. V. / Lopatin, A. V.	Fundamental frequency of fully clamped antisymmetric angle-ply laminated plates with structural anisotropy	530-538
Vantadori, Sabrina / Muniz-Calvente, Miguel / Scorza, Daniela / Fernández-Canteli, Alfonso / Vázquez, Adrián Álvarez / Carpinteri, Andrea	The Generalised Local Model applied to Fibreglass	1353-1360
Wan, Yun / Diao, Chengyan / Yang, Bin / Zhang, Lu / Chen, Shenshen	GF/epoxy laminates embedded with wire nets: A way to improve the low-velocity impact resistance and energy absorption ability	818-835
Repka, M. / Sladek, V. / Sladek, J.	Gradient elasticity theory enrichment of plate bending theories	447-457
Hussein, Abdelrahman / Kim, Byungki	Graphene/polymer nanocomposites: The active role of the matrix in stiffening mechanics	170-181
Reincke, Tobias / Hartwig, Sven / Dilger, Klaus	High-tensile joints of continuously fusion bonded hybrid structures	111-118
Javier, Carlos / Matos, Helio / Shukla, Arun	Hydrostatic and blast initiated implosion of environmentally degraded Carbon-Epoxy composite cylinders	897-908
Akbar, M. / Curiel-Sosa, J. L.	Implementation of multiphase piezoelectric composites energy harvester on aircraft wingbox structure with fuel saving evaluation	1000-1020
Ilinzeer, S. / Rupp, P. / Weidenmann, K. A.	Influence of corrosion on the mechanical properties of hybrid sandwich structures with CFRP face sheets and aluminum foam core	142-150
Lacki, Piotr / Derlatka, Anna	Influence of PU foam reinforcement of I-beam on buckling resistance	201-209
Lampani, Luca / Gaudenzi, Paolo	Innovative composite material component with embedded self-powered wireless sensor device for structural monitoring	136-141
Lee, Su-Jin / Kawashima, Shiho / Kim, Ki-Joong / Woo, Sang-Kyun / Won, Jong-Pil	Interfacial properties of nanosilica-treated structural polymer fibres in cement matrix composites	465-472
Liu, Fengrui / Lu, Xuheng / Zhao, Libin / Zhang, Jianyu / Xu, Jifeng / Hu, Ning	Investigation of bolt load redistribution and its effect on failure prediction in double-lap, multi-bolt composite joints	397-405
Lippky, K. / Mund, M. / Blass, D. / Dilger, K.	Investigation of hybrid fusion bonds under varying manufacturing and operating procedures	275-282
Hu, Haixiao / Cao, Dongfeng / Pavier, Martyn / Zhong, Yucheng / Zu, Lei / Liu, Lisheng / Li, Shuxin	Investigation of non-uniform gelation effects on residual stresses of thick laminates based on tailed FBG sensor	1361-1372
Dimassi, M. Adli / John, Marianne / Herrmann, Axel S.	Investigation of the temperature dependent impact behaviour of pin reinforced foam core sandwich structures	774-782
Huang, Kai / Guo, Licheng / Yu, Hongjun	Investigation on mixed-mode dynamic stress intensity factors of an interface crack in bi-materials with an inclusion	491-499
Nežerka, V. / Somr, M. / Janda, T. / Vorel, J. / Doškář, M. / Antoš, J. / Zeman, J. / Novák, J.	A jigsaw puzzle metamaterial concept	1275-1279
Garza, Carlos / Das, Raj / Shterenlikht, Anton / Pavier, Martyn	Measurement of assembly stress in composite structures using the deep-hole drilling technique	119-126
Signorini, Cesare / Nobili, Andrea / Falope, Federico O.	Mechanical performance and crack pattern analysis of aged Carbon Fabric Cementitious Matrix (CFRCM) composites	1114-1120
Milad, Mohamed / Green, Sarah / Ye, Jianqiao	Mechanical properties of reinforced composite materials under uniaxial and planar tension loading regimes measured using a non-contact optical method	1145-1154
Gaff, Milan / Babiak, Marian	Methods for determining the plastic work in bending and impact of selected factors on its value	66-76
Garzon-Hernandez, S. / Garcia-Gonzalez, D. / Arias, A.	Multi-impact mechanical behaviour of short fibre reinforced composites	241-252
Shishkovsky, Igor / Sherbakov, Vladimir / Ibatullin, Ildar / Volchkov, Vladislav / Volova, Larisa	Nano-size ceramic reinforced 3D biopolymer scaffolds: Tribomechanical testing and stem cell activity	651-659
Gauch, Erin / LeBlanc, James / Shukla, Arun	Near field underwater explosion response of polyurea coated composite cylinders	836-852
Tomczyk, Barbara / Szczerba, Paweł	A new asymptotic-tolerance model of dynamic and stability problems for longitudinally graded cylindrical shells	473-481
Abd El Fattah, Ahmed	New axial Stress-Strain model of square concrete columns confined with lateral steel and FRP	731-751
Lv, Zheng / Qiu, Zhiping / Zhu, Jingjing / Zhu, Bo / Yang, Wenyu	Nonlinear free vibration analysis of defective FG nanobeams embedded in elastic medium	675-685
Nair, Rajeev G. / Sundararajan, T. / Guruprasad, P. J.	A novel framework using point interpolation method with voxels for variational asymptotic method unit cell homogenization of woven composites	261-274
Liebig, Wilfried V. / Sessner, Vincent / Weidenmann, Kay A. / Kärger, Luise	Numerical and experimental investigations of the damping behaviour of hybrid CFRP-elastomer-metal laminates	1109-1113
Leal, A. J. S. / Campilho, R. D. S. G.	Numerical evaluation of the ENF and 4ENF tests for the shear toughness estimation of adhesive joints	333-343
Grunwald, Cordula / Kaufmann, Marvin / Alter, Benjamin / Vallée, Till / Tannert, Thomas	Numerical investigations and capacity prediction of G-FRP rods glued into timber	47-59
Riccio, A. / Cristiano, R. / Saputo, S. / Sellitto, A.	Numerical methodologies for simulating bird-strike on composite wings	590-602
Souza, Juliana P. B. / Aguiar, Ricardo A. A. / Costa, Hector R. M. / Reis, João M. L. / Pacheco, Pedro M. C. L.	Numerical modelling of the mechanical behavior of hybrid joint obtained by spot welding and bonding	216-221
Solyaev, Y. / Lurie, S.	Numerical predictions for the effective size-dependent properties of piezoelectric composites with spherical inclusions	1099-1108
Riccio, A. / Raimondo, A. / Saputo, S. / Sellitto, A. / Battaglia, M. / Petrone, G.	A numerical study on the impact behaviour of natural fibres made honeycomb cores	909-916
Abdullah, S. I. B. Syed / Iannucci, L. / Greenhalgh, E. S.	On the translaminar fracture toughness of Vectran/epoxy composite material	566-577
D'Antino, T. / Carozzi, F. G. / Colombi, P. / Poggi, C.	Out-of-plane maximum resisting bending moment of masonry walls strengthened with FRCM composites	881-896
Lei, Zuxiang / Su, Qiangqiang / Zeng, Huangpeng / Zhang, Yang / Yu, Chunhua	Parametric studies on buckling behavior of functionally graded graphene-reinforced composites laminated plates in thermal environment	695-709
Liu, Yiding / Lemanski, Stuart / Zhang, Xiang	Parametric study of size, curvature and free edge effects on the predicted strength of bonded composite joints	364-373
Abd El Fattah, Ahmed / Rasheed, Hayder	Passive dry fiber confinement for reinforced concrete stub columns	1051-1058
Kang, Sang-Hyeon / Kang, Myeongcheol / Kang, Lae-Hyong	Piezoelectric smart composite blades for collision monitoring: Measurement of mechanical properties and impact sensitivity	1295-1307
Sikora, Adam / Gaff, Milan / Hýsek, Štěpán / Babiak, Marian	The plasticity of composite material based on winter rapeseed as a function of selected factors	783-792
Mehrparvar, M. / Ghannadpour, S. A. M.	Plate assembly technique for nonlinear analysis of relatively thick functionally graded plates containing rectangular holes subjected to in-plane compressive load	867-880
Biolzi, Luigi / Cattaneo, Sara / Orlando, Maurizio / Piscitelli, Lorenzo Ruggero / Spinelli, Paolo	Post-failure behavior of laminated glass beams using different interlayers	578-589
Samborski, Sylwester	Prediction of delamination front’s advancement direction in the CFRP laminates with mechanical couplings subjected to different fracture toughness tests	643-650
Huth, Michael / Chen, Ching-Wen / Köhling, Jonas / Taffa, Dereje Hailu / Wark, Michael / Wagner, Veit	Prediction of delamination state of 2D filler materials in cyclic olefin copolymer for enhanced barrier applications	853-859
Chen, Mingming / Zhang, Daxu / Gong, Jinghai	Predictions of transverse thermal conductivities for plain weave ceramic matrix composites under in-plane loading	759-767
Memmolo, V. / Park, Y. J. / Lilov, M. / Monaco, E. / Ricci, F.	Preliminary acousto-ultrasonic investigation for multi-parameter transducer self-diagnostic system in composites	1229-1238
Smorygo, Oleg / Mikutski, Vitali / Marukovich, Alexander / Sadykov, Vladislav / Bespalko, Yulia / Stefan, Adriana / Pelin, Cristina-Elisabeta	Preparation and characterization of open-cell epoxy foams modified with carbon fibers and aluminum powder	917-923
Zhao, Libin / Yang, Wen / Cao, Tiancheng / Li, Haibo / Liu, Baorui / Zhang, Chao / Zhang, Jianyu	A progressive failure analysis of all-C/SiC composite multi-bolt joints	1059-1068
Höwer, Daniel / Jois, Kumar C. / Lerch, Bradley A. / Bednarcyk, Brett A. / Pineda, Evan J. / Reese, Stefanie / Simon, Jaan-Willem	Relevance of 3D simulations and sandwich core topology for the modeling of honeycomb core sandwich panels undergoing interfacial crack propagation	660-674
Yang, Xianfeng / Ma, Jingxuan / Sun, Yuxin / Yang, Jialing	Ripplecomb: A novel triangular tube reinforced corrugated honeycomb for energy absorption	988-999
Katili, Irwan / Maknun, Imam Jauhari / Batoz, Jean-Louis / Ibrahimbegovic, Adnan	Shear deformable shell element DKMQ24 for composite structures	182-200
Lee, Su-Jin / Kawashima, Shiho / Kim, Ki-Joong / Woo, Sang-Kyun / Won, Jong-Pil	Shrinkage characteristics and strength recovery of nanomaterials-cement composites	559-565
Wang, Xing-er / Yang, Jian / Wang, Feiliang / Liu, Qing-feng / Xu, Han	Simulating the impact damage of laminated glass considering mixed mode delamination using FEM/DEM	1239-1252
Dujardin, N. / Fois, M. / Grimau, M. / Poilane, C.	Soft interface dynamics in flax-fabrics/epoxy composites	389-396
Marczak, Jakub / Jędrysiak, Jarosław	Some remarks on modelling of vibrations of periodic sandwich structures with inert core	752-758
Liu, Qimao	Stationary random response of non-viscously damped polymer matrix composite structure systems	1-8
Cho, Chang-Geun / Han, Byung-Chan / Lim, Seung-Chan / Morii, Noharu / Kim, Jae-Whan	Strengthening of reinforced concrete columns by High-Performance Fiber-Reinforced Cementitious Composite (HPFRC) sprayed mortar with strengthening bars	1078-1086
Koshuro, Vladimir / Fomina, Marina / Voyko, Aleksey / Rodionov, Igor / Zakharevich, Andrey / Skaptsov, Aleksandr / Fomin, Aleksandr	Surface morphology of zirconium after treatment with high-frequency currents	210-215
Bespalko, Y. / Sadykov, V. / Eremeev, N. / Skryabin, P. / Krieger, T. / Sadovskaya, E. / Bobrova, L. / Uvarov, N. / Lukashevich, A. / Krasnov, A. / Fedorova, Y.	Synthesis of tungstates/Ni0.5Cu0.5O nanocomposite materials for hydrogen separation cermet membranes	1263-1274
Gaff, Milan / Babiak, Marian	Tangent modulus as a function of selected factors	436-446
Sato, Mio / Koyanagi, Jun / Lu, Xin / Kubota, Yuki / Ishida, Yuichi / Tay, T. E.	Temperature dependence of interfacial strength of carbon-fiber-reinforced temperature-resistant polymer composites	283-289
Wan, Yanxiang / Xiong, Yeping / Zhang, Shengming	Temperature dependent dynamic mechanical properties of Magnetorheological elastomers: Experiment and modeling	768-773
Atiqah, A. / Jawaid, M. / Sapuan, S. M. / Ishak, M. R. / Alothman, Othman Y.	Thermal properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites	954-958
Lee, Heeyoung / Song, Young Min / Loh, Kenneth J. / Chung, Wonseok	Thermal response characterization and comparison of carbon nanotube-enhanced cementitious composites	1042-1050
Asim, M. / Paridah, M. T. / Saba, N. / Jawaid, M. / Alothman, Othman Y. / Nasir, M. / Almutairi, Z.	Thermal, physical properties and flammability of silane treated kenaf/pineapple leaf fibres phenolic hybrid composites	1330-1338
Jia, X. L. / Ke, L. L. / Zhong, X. L. / Sun, Y. / Yang, J. / Kitipornchai, S.	Thermal-mechanical-electrical buckling behavior of functionally graded micro-beams based on modified couple stress theory	625-634
Zhai, Yunong / Li, Xiaoqiang / Wang, Liang / Li, Dongsheng	Three-dimensional layer-by-layer stress analysis of single-lap, countersunk composite joints with varying joining interface conditions	1021-1031
Xu, Xiangyang / Bureick, Johannes / Yang, Hao / Neumann, Ingo	TLS-based composite structure deformation analysis validated with laser tracker	60-65
Jędrysiak, Jarosław	Tolerance modelling of free vibrations of medium thickness functionally graded plates	1253-1262
Adamus, Konrad / Adamus, Janina / Lacki, Janusz	Ultrasonic testing of thin walled components made of aluminum based laminates	95-101
Liu, Hu / Lv, Zheng	Uncertain material properties on wave dispersion behaviors of smart magneto-electro-elastic nanobeams	615-624
Gholampour, Aliakbar / Ozbakkaloglu, Togay	Understanding the compressive behavior of shape memory alloy (SMA)-confined normal- and high-strength concrete	943-953
Magnucka-Blandzi, Ewa / Kȩdzia, Piotr / Smyczyński, Mikołaj Jan	Unsymmetrical sandwich beams under three-point bending – Analytical studies	539-544
Zappino, E. / Li, G. / Pagani, A. / Carrera, E. / de Miguel, A. G.	Use of higher-order Legendre polynomials for multilayered plate elements with node-dependent kinematics	222-232
Wolff, Johannes / Brysch, Marco / Hühne, Christian	Validity check of an analytical dimensioning approach for potted insert load introductions in honeycomb sandwich panels	1195-1215
Zhu, Yingdan / Qin, Yongli / Qi, Shijie / Xu, Haibing / Liu, Dong / Yan, Chun	Variable Angle Tow reinforcement design for locally reinforcing an open-hole composite plate	162-169
Baltacıoğlu, Ali Kemal / Civalek, Ömer	Vibration analysis of circular cylindrical panels with CNT reinforced and FGM composites	374-388

Informations
sur cette fiche
IssueID
37786
Publié(e) le:
23.10.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - octobre 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - octobre 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.