Composite Structures - mars 2019

Publié:	mars 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Rahimi-Moghaddam, Abolfazl / Danesh, Mohammad / Torabi, Keivan	Absolute frequency analysis of traveling waves in a thin-wall laminated composite cylindrical shell rotating on two-ending elastic supports	129-147
Sinchuk, Y. / Pannier, Y. / Antoranz-Gonzalez, R. / Gigliotti, M.	Analysis of moisture diffusion induced stress in carbon/epoxy 3D textile composite materials with voids by µ-CT based Finite Element Models	561-570
Tang, Hongyuan / Deng, Xuezhi / Lin, Zhinbin / Zhou, Xiang	Analytical and experimental investigation on bond behavior of CFRP-to-stainless steel interface	94-105
Lin, Shiyao / Nguyen, Nhung / Waas, Anthony M.	Application of continuum decohesive finite element to progressive failure analysis of composite materials	365-380
Li, Haichao / Pang, Fuzhen / Li, Yuhui / Gao, Cong	' Application of first-order shear deformation theory for the vibration analysis of functionally graded doubly-curved shells of revolution	22-42
Yang, Hao / Xu, Xiangyang / Neumann, Ingo	An automatic finite element modelling for deformation analysis of composite structures	434-438
Yang, Yongming / Silva, Manuel A. G. / Biscaia, Hugo / Chastre, Carlos	Bond durability of CFRP laminates-to-steel joints subjected to freeze-thaw	243-258
Arhant, Mael / Briançon, Christophe / Burtin, Christian / Davies, Peter	Carbon/polyamide 6 thermoplastic composite cylinders for deep sea applications	535-546
Liu, Shibing / Yang, Bingen	A closed-form analytical solution method for vibration analysis of elastically connected double-beam systems	598-608
Pastorino, D. / Blázquez, A. / López-Romano, B. / París, F.	Closed-form methodology for stress analysis of composite plates with cutouts and non-uniform lay-up	389-397
Peeters, Daniël / Clancy, Gearóid / Oliveri, Vincenzo / O'Higgins, Ronan / Jones, David / Weaver, Paul M.	Concurrent design and manufacture of a thermoplastic composite stiffener	271-280
Sator, L. / Sladek, V. / Sladek, J.	Consistent 2D formulation of thermoelastic bending problems for FGM plates	412-422
Pereiro-Barceló, Javier / Bonet, José L. / Cabañero-Escudero, Beatriz / Martínez-Jaén, Begoña	Cyclic behavior of hybrid RC columns using High-Performance Fiber-Reinforced Concrete and Ni-Ti SMA bars in critical regions	207-219
Wong, Yong Jie / Arumugasamy, Senthil Kumar / Mustapha, K. B.	Development of a computational predictive model for the nonlinear in-plane compressive response of sandwich panels with bio-foam	423-433
del Rey Castillo, Enrique / Allen, Tom / Henry, Richard / Griffith, Michael / Ingham, Jason	' Digital image correlation (DIC) for measurement of strains and displacements in coarse, low volume-fraction FRP composites used in civil infrastructure	43-57
Hashim, Nurain / Majid, Dayang Laila Abdul / Mahdi, El-Sadig / Zahari, Rizal / Yidris, Noorfaizal	Effect of fiber loading directions on the low cycle fatigue of intraply carbon-Kevlar reinforced epoxy hybrid composites	476-483
Giasin, K. / Gorey, G. / Byrne, C. / Sinke, J. / Brousseau, E.	Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates	159-174
Dickson, Andrew N. / Dowling, Denis P.	Enhancing the bearing strength of woven carbon fibre thermoplastic composites through additive manufacturing	381-388
Losanno, Daniele / Madera Sierra, Ingrid E. / Spizzuoco, Mariacristina / Marulanda, Johannio / Thomson, Peter	Experimental assessment and analytical modeling of novel fiber-reinforced isolators in unbounded configuration	66-82
Chen, Xiao	Experimental observation of fatigue degradation in a composite wind turbine blade	547-551
Moita, José S. / Franco Correia, Victor / Soares, Cristóvão M. Mota / Herskovits, José	Higher-order finite element models for the static linear and nonlinear behaviour of functionally graded material plate-shell structures	465-475
Luan, Congcong / Yao, Xinhua / Zhang, Chuck / Wang, Ben / Fu, Jianzhong	Large-scale deformation and damage detection of 3D printed continuous carbon fiber reinforced polymer-matrix composite structures	552-560
Kanerva, M. / Jokinen, J. / Sarlin, E. / Pärnänen, T. / Lindgren, M. / Järventausta, M. / Vuorinen, J.	Lower stiffness of GFRP after sulfuric acid-solution aging is due to degradation of fibre-matrix interfaces?	524-534
Li, Yingguang / Li, Nanya / Zhou, Jing / Cheng, Qiang	Microwave curing of multidirectional carbon fiber reinforced polymer composites	83-93
Hu, Junshan / Zhang, Kaifu / Xu, Yunwei / Cheng, Hui / Xu, Guanhua / Li, Hailin	Modeling on bearing behavior and damage evolution of single-lap bolted composite interference-fit joints	452-464
Ye, Junjie / Chu, Chenchen / Cai, Heng / Hou, Xiaonan / Shi, Baoquan / Tian, Shaohua / Chen, Xuefeng / Ye, Jianqiao	A multi-scale model for studying failure mechanisms of composite wind turbine blades	220-229
Zhang, Heng / Ding, Xiaohong / Li, Hao / Xiong, Min	Multi-scale structural topology optimization of free-layer damping structures with damping composite materials	609-624
Li, Chong / Shen, Hui-Shen / Wang, Hai	Nonlinear bending of sandwich beams with functionally graded negative Poisson’s ratio honeycomb core	317-325
Goncalves, Bruno Reinaldo / Karttunen, Anssi T. / Romanoff, Jani	A nonlinear couple stress model for periodic sandwich beams	586-597
Huang, Qian / Hamed, Ehab	Nonlinear finite element analysis of composite precast concrete sandwich panels made with diagonal FRP bar connectors	304-316
Yu, Tao / Zhao, Hongchao / Ren, Ting / Remennikov, Alex	Novel hybrid FRP tubular columns with large deformation capacity: Concept and behaviour	500-512
Xu, Rui / Wang, Wei / Yu, Dan	A novel multilayer sandwich fabric-based composite material for infrared stealth and super thermal insulation protection	58-65
Chandrathilaka, E. R. K. / Gamage, J. C. P. H. / Fawzia, S.	Numerical modelling of bond shear stress slip behavior of CFRP/steel composites cured and tested at elevated temperature	1-10
Repka, M. / Sladek, V. / Sladek, J.	Numerical study of size effects in micro/nano plates by moving finite elements	291-303
Moure, M. M. / Feito, N. / Aranda-Ruiz, J. / Loya, J. A. / Rodríguez-Millán, M.	On the characterization and modelling of high-performance para-aramid fabrics	326-337
Teter, Andrzej / Kolakowski, Zbigniew	On using load-axial shortening plots to determine the approximate buckling load of short, real angle columns under compression	175-183
Salama, A. S. D. / Hawileh, R. A. / Abdalla, J. A.	Performance of externally strengthened RC beams with side-bonded CFRP sheets	281-290
Qi, Zhenchao / Zhang, Nanxi / Liu, Yong / Chen, Wenliang	Prediction of mechanical properties of carbon fiber based on cross-scale FEM and machine learning	199-206
Zhu, Jianjian / Wang, Yishou / Qing, Xinlin	A real-time electromechanical impedance-based active monitoring for composite patch bonded repair structure	513-523
Zenkour, Ashraf M.	Refined multi-phase-lags theory for photothermal waves of a gravitated semiconducting half-space	346-364
Kabir, H. / Aghdam, M. M.	A robust Bézier based solution for nonlinear vibration and post-buckling of random checkerboard graphene nano-platelets reinforced composite beams	184-198
Keshtegar, Behrooz / Bagheri, Mansour / Yaseen, Zaher Mundher	Shear strength of steel fiber-unconfined reinforced concrete beam simulation: Application of novel intelligent model	230-242
Banat, D. / Mania, R. J.	Stability and strength analysis of thin-walled GLARE composite profiles subjected to axial loading	338-345
Sarasini, F. / Tirillò, J. / Lampani, L. / Sasso, M. / Mancini, E. / Burgstaller, C. / Calzolari, A.	Static and dynamic characterization of agglomerated cork and related sandwich structures	439-451
López-Aenlle, M. / Pelayo, F.	Static and dynamic effective thickness in five-layered glass plates	259-270
De Maio, Umberto / Fabbrocino, Francesco / Greco, Fabrizio / Leonetti, Lorenzo / Lonetti, Paolo	A study of concrete cover separation failure in FRP-plated RC beams via an inter-element fracture approach	625-636
Donnini, Jacopo / Chiappini, Gianluca / Lancioni, Giovanni / Corinaldesi, Valeria	Tensile behaviour of glass FRCM systems with fabrics’ overlap: Experimental results and numerical modeling	398-411
Aria, A. I. / Friswell, M. I. / Rabczuk, T.	Thermal vibration analysis of cracked nanobeams embedded in an elastic matrix using finite element analysis	118-128
Sit, Moumita / Ray, Chaitali	A third order nonlinear model to study the dynamic behaviour of composite laminated structures under thermal effect with experimental verification	106-117
Bahmani, Aram / Li, Geng / Willett, Thomas L. / Montesano, John	Three-dimensional micromechanical assessment of bio-inspired composites with non-uniformly dispersed inclusions	484-499
Yang, Yuanyi / Deng, Yi / Li, Xingkui	Uniaxial compression mechanical properties and fracture characteristics of brucite fiber reinforced cement-based composites	148-158
Vallmajó, O. / Cózar, I. R. / Furtado, C. / Tavares, R. / Arteiro, A. / Turon, A. / Camanho, P. P.	Virtual calculation of the B-value allowables of notched composite laminates	11-21
Liao, Yingqian / Garg, Nitin / Martins, Joaquim R. R. A. / Young, Yin L.	Viscous fluid–structure interaction response of composite hydrofoils	571-585

Informations
sur cette fiche
IssueID
37776
Publié(e) le:
23.10.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - mars 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - mars 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.