Composite Structures - mars 2020

Publié:	mars 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Chen, Yuan / He, Qinghao	3D-printed short carbon fibre reinforced perforated structures with negative Poisson's ratios: Mechanisms and design	111859
Xu, D. / Liu, P. F. / Chen, Z. P. / Leng, J. X. / Jiao, L.	Achieving robust damage mode identification of adhesive composite joints for wind turbine blade using acoustic emission and machine learning	111840
Tang, Haishan / Hu, Yujin / Li, Li / Ling, Ling	Active control for ratios of strains in functionally graded piezoelectric composites	111861
Wolter, Nick / Beber, Vinicius Carrillo / Brede, Markus / Koschek, Katharina	Adhesively- and hybrid- bonded joining of basalt and carbon fibre reinforced polybenzoxazine-based composites	111800
Madke, Rohit Raju / Chowdhury, Rajib	Anti-impact behavior of auxetic sandwich structure with braided face sheets and 3D re-entrant cores	111838
Broutelle, Marion / Lachaud, Frédéric / Barrièrre, Ludovic / DaidiÉ, Alain / Chardonneau, Alexandre / Bouillon, Florent	Bearing damage identification in oxide/oxide ceramic matrix composite with a new test design	111902
Zhang, Jingwei / Taylor, Tom / Kizaki, Toru / Yanagimoto, Jun	Bendable metal-based composite sheets with a truncated dome core made of carbon fibre reinforced thermoplastics	111918
Silva, M. A. L. / Gamage, J. C. P. H.	Combined effects of Carbon Fiber Reinforced Polymer flexural reinforcements and post installed shear dowels on the performance of flat slabs	111848
Wu, Fanghong / Xu, Lihua / Chi, Yin / Zeng, Yanqin / Deng, Fangqian / Chen, Qian	Compressive and flexural properties of ultra-high performance fiber-reinforced cementitious composite: The effect of coarse aggregate	111810
Razaqpur, A. G. / Lamberti, M. / Ascione, F.	Debonding evolution in nonlinear FRP-retrofitted RC beams with cohesive interface	111858
Muflikhun, Muhammad Akhsin / Higuchi, Ryo / Yokozeki, Tomohiro / Aoki, Takahira	Delamination behavior and energy release rate evaluation of CFRP/SPCC hybrid laminates under ENF test: Corrected with residual thermal stresses	111890
Joo, Sung-Jun / Yu, Myeong-Hyeon / Seock Kim, Won / Lee, Jong-Wook / Kim, Hak-Sung	Design and manufacture of automotive composite front bumper assemble component considering interfacial bond characteristics between over-molded chopped glass fiber polypropylene and continuous glass fiber polypropylene composite	111849
Cai, Changqi / Zhou, Jiaxi / Wu, Linchao / Wang, Kai / Xu, Daolin / Ouyang, Huajiang	Design and numerical validation of quasi-zero-stiffness metamaterials for very low-frequency band gaps	111862
Zhang, Qian / Xu, Hui / Jia, Xiaolong / Zu, Lei / Cheng, Shuo / Wang, Huabi	Design of a 70 MPa type IV hydrogen storage vessel using accurate modeling techniques for dome thickness prediction	111915
Zhou, Yuchen / Xiao, Yi / He, Yi / Zhang, Zhen	A detailed finite element analysis of composite bolted joint dynamics with multiscale modeling of contacts between rough surfaces	111874
Liu, Tianqiao / Yang, Jia-qi / Feng, Peng / Harries, Kent A.	Determining rotational stiffness of flange-web junction of pultruded GFRP I-sections	111843
Sun, Wei / Duan, Chunzheng / Yin, Wendian	Development of a dynamic constitutive model with particle damage and thermal softening for Al/SiCp composites	111856
Kim, Chang-Uk / Song, Jung-il	Development of lightweight fiber-reinforced composite pins for heavy load long pitch roller chains	111839
Luo, Yunfeng / Chen, Wenjiong / Liu, Shutian / Li, Quhao / Ma, Yaohui	A discrete-continuous parameterization (DCP) for concurrent optimization of structural topologies and continuous material orientations	111900
Gawryluk, Jarosław / Mitura, Andrzej / Teter, Andrzej	Dynamic control of kinematically excited laminated, thin-walled beam using macro fibre composite actuator	111898
Attukur Nandagopal, Rajaram / Boay, Chai Gin / Narasimalu, Srikanth	An empirical model to predict the strength degradation of the hygrothermal aged CFRP material	111876
Barbosa, Paulo C. P. F. / Del Claro, Vergílio T. S. / Sousa, Marcelo S. / Cavalini, Aldemir A. / Steffen, Valder	Experimental analysis of the SHBT approach for the dynamic modeling of a composite hollow shaft	111892
Zhang, Xiaoyu / Xu, Fei / Zang, Yuyan / Feng, Wei	Experimental and numerical investigation on damage behavior of honeycomb sandwich panel subjected to low-velocity impact	111882
Zhang, Jing / Hu, Xiamin / Sun, Qimeng / Zhang, Yijie / Zhu, Wenwen / Li, Lin	Experimental study on seismic performance of glulam-concrete composite beam-to-column joints	111864
Muth, Markus / Pottmeyer, Florentin / Weidenmann, Kay André	Failure behaviour of metal inserts embedded in CFRP subsequent to thermal, mechanical and cyclic pre-damage	111877
Murray, B. R. / Kalteremidou, K. A. / Carrella-Payan, D. / Cernescu, A. / Van Hemelrijck, D. / Pyl, L.	Failure characterisation of CF/epoxy V-shape components using digital image correlation and acoustic emission analyses	111797
Lee, Young-Jun / Ahmed, Hasan / Lee, Jung-Ryul	Filament-wound composite pressure vessel inspection based on rotational through-transmission laser ultrasonic propagation imaging	111871
Zhang, Yuan / Hu, Hong / Kyosev, Yordan / Liu, Yanping	Finite element modeling of 3D spacer fabric: Effect of the geometric variation and amount of spacer yarns	111846
Al-Rubaye, Mohammed / Manalo, Allan / Alajarmeh, Omar / Ferdous, Wahid / Lokuge, Weena / Benmokrane, Brahim / Edoo, Azam	Flexural behaviour of concrete slabs reinforced with GFRP bars and hollow composite reinforcing systems	111836
Jamatia, Rimen / Deb, Arghya	FRP confined hollow concrete columns under axial compression: A comparative assessment	111857
Akpoyomare, A. I. / Okereke, M. I. / Bingley, M. S.	Generation of virtual geometric domains for woven textile composites	111624
Zhao, Y. / Cao, M. / Tan, H. X. / Ridha, M. / Tay, T. E.	Hybrid woven carbon-Dyneema composites under drop-weight and steel ball impact	111811
Tie, Ying / Zhang, Qingsong / Hou, Yuliang / Li, Cheng	Impact damage assessment in orthotropic CFRP laminates using nonlinear Lamb wave: Experimental and numerical investigations	111869
Liu, Bin / Gao, Nongyue / Cao, Shuanghui / Ye, Fang / Liu, Yongsheng / Zhang, Yi / Cheng, Laifei / Kikuchi, Masanori	Interlaminar toughening of unidirectional CFRP with multilayers graphene and MWCNTs for Mode Ⅱ fracture	111888
Mobarakian, Mohsen / Safarabadi, Majid / Farahani, Mohammadreza	Investigating the effects of cooling rate on distortion of asymmetric composite laminates	111875
Zhou, Bin-bin / Zhou, Chang-yu / Chang, Le / Yu, Xiao-chun / Ye, Cheng / Zhang, Bo-jun	Investigation on fatigue crack growth behavior of Zr702/TA2/Q345R explosive welding composite plate with a through-wall crack	111845
Carvelli, Valter / Nishida, Hironori / Fujii, Toru / Okubo, Kazuya	Low velocity impact and CAI of woven carbon fibre reinforced highly polymerized thermoplastic epoxy modified with submicron diameter glass fibres	111835
Attard, Thomas L. / Soltani, Mahmoodreza	Mechanical behavior and composite action of two-wythe precast concrete sandwich beams via chemically hybridized intermediate layer	111903
Mei, Ming / He, Yujia / Yang, Xujing / Wei, Kai / Mo, Fuhao	Meso/macro scale response of the comingled glass polypropylene 2-2 twill woven fabric under shear pre-tension coupling	111854
Song, Zhenhua / Hou, Liang / Whisler, Daniel / Gao, Guangfa	Mesoscopic numerical investigation of dynamic mechanical properties of ice with entrapped air bubbles based on a stochastic sparse distribution mechanism	111834
Sapozhnikov, Sergei B. / Swolfs, Yentl / Lomov, Stepan V.	Mode I and II interlaminar critical energy release rates in all-carbon interlayer unidirectional fibre-hybrids based on ultrahigh-modulus and high-strength fibres	111886
Shin, Yong Chul / Lee, Woo Il / Kim, Han Sang	Mode II interlaminar fracture toughness of carbon nanotubes/epoxy film-interleaved carbon fiber composites	111808
Zhou, Binbin / Wu, Ruo-Yang / Feng, Jian / Yin, Shiping	Modeling of tensile behavior of hybrid GFRP-steel reinforced concrete chords	111853
Liu, Sinan / Yang, Tao / Liu, Chang / Jin, Yan / Sun, Dan / Shen, Yifei	Modelling and experimental validation on drilling delamination of aramid fiber reinforced plastic composites	111907
Liu, Haibao / Liu, Jun / Ding, Yuzhe / Zhou, Jin / Kong, Xiangshao / Harper, Lee T. / Blackman, Bamber R. K. / Falzon, Brian G. / Dear, John P.	Modelling damage in fibre-reinforced thermoplastic composite laminates subjected to three-point bend loading	111889
Skinner, Travis / Rai, Ashwin / Chattopadhyay, Aditi	Multiscale ceramic matrix composite thermomechanical damage model with fracture mechanics and internal state variables	111847
Yang, Bin / Yu, Zeliang / Zhang, Qilin / Shang, Yingying / Yan, Yuhong	The nonlinear orthotropic material model describing biaxial tensile behavior of PVC coated fabrics	111850
Duan, Shengyu / Xi, Li / Wen, Weibin / Fang, Daining	A novel design method for 3D positive and negative Poisson's ratio material based on tension-twist coupling effects	111899
Liu, Qi-Qing / Wang, Shi-ping / Lin, Xin / Cui, Pu / Zhang, Shuai	Numerical simulation on the anti-penetration performance of polyurea-core Weldox 460 E steel sandwich plates	111852
Yuan, Zishun / Wang, Kaichen / Qiu, Jiawen / Xu, Yue / Chen, Xiaogang	A numerical study on the mechanisms of Dyneema® quasi-isotropic woven panels under ballistic impact	111855
Ghatage, Pankaj S. / Kar, Vishesh R. / Sudhagar, P. Edwin	On the numerical modelling and analysis of multi-directional functionally graded composite structures: A review	111837
Zhang, Lingfeng / Liu, Weiqing / Wang, Lu / Ling, Zhibin	On-axis and off-axis compressive behavior of pultruded GFRP composites at elevated temperatures	111891
Patel, Dipen K. / Parthasarathy, Triplicane / Przybyla, Craig	Predicting the effects of microstructure on matrix crack initiation in fiber reinforced ceramic matrix composites via machine learning	111702
Ma, Wei-Li / Jiang, Zi-Cheng / Lee, Kang-Yong / Li, Xian-Fang	A refined beam theory for bending and vibration of functionally graded tube-beams	111878
Sun, Fang-jin / Pang, Shao-Hua / Zhang, Zhong-Wen / Fu, Feng / Qian, Kai	Retrofitting seismically damaged steel sections encased concrete composite walls using externally bonded CFRP strips	111927
Younis, Adel / Ebead, Usama / Suraneni, Prannoy / Nanni, Antonio	Short-term flexural performance of seawater-mixed recycled-aggregate GFRP-reinforced concrete beams	111860
Sun, X. C. / Hallett, S. R. / Suemasu, H. / Wisnom, M. R.	Simplified analytical approximations for scaled composite laminates under transverse loading	111745
Jin, Liu / Xia, Hai / Jiang, Xuan-ang / Du, Xiuli	Size effect on shear failure of CFRP-strengthened concrete beams without web reinforcement: Meso-scale simulation and formulation	111895
Li, Wenhao / Guo, Shijun / Giannopoulos, Ioannis K. / He, Shun / Liu, Yiding	Strength enhancement of bonded composite laminate joints reinforced by composite Pins	111916
Hua, W. / Fischer, T. / Harhash, M. / Ziegmann, G. / Palkowski, H.	Study on processing galvanized steel/PA6 sandwich composites by hot-pressing: Influence of interface properties and surface treatment on the adhesion strength	111779
Duan, Shuyong / Zhang, Zhanming / Wei, Kai / Wang, Fang / Han, Xu	Theoretical study and physical tests of circular hole-edge stress concentration in long glass fiber reinforced polypropylene composite	111884
Galos, Joel	Thin-ply composite laminates: a review	111920
Moro, A. / Filipovic, D. / Kress, G. / Winkler, M.	Thin-shell-theory solutions for the static structural response of circular-sections shaped corrugated laminates	111730
Kar, Shranish / Kumari, Poonam	Three-dimensional analytical solution of arbitrarily supported cylindrical panels with weak interfaces using the extended Kantorovich method	111802
Mao, J. J. / Lu, H. M. / Zhang, W. / Lai, S. K.	Vibrations of graphene nanoplatelet reinforced functionally gradient piezoelectric composite microplate based on nonlocal theory	111813

Informations
sur cette fiche
IssueID
37752
Publié(e) le:
23.10.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - mars 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - mars 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.