Composite Structures - septembre 2020

Publié:	septembre 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Chakraborty, Samit / Biswas, Manik Chandra	3D printing technology of polymer-fiber composites in textile and fashion industry: A potential roadmap of concept to consumer	112562
Yu, Tianmiao / Jiang, Fengchun / Wang, Jiahao / Wang, Zhenqiang / Chang, Yunpeng / Guo, Chunhuan	Acoustic insulation and absorption mechanism of metallic hollow spheres composites with different polymer matrix	112566
Albazzan, Mazen A. / Pascale, Nicole / Dillard, Tyler / Gürdal, Zafer / Harik, Ramy / Hartzell, Jesse	Analysis and verification of the degree of bending isotropy of thin laminated composites manufactured using non-crimp fabric	112524
Wintiba, Badadjida / Vasiukov, Dmytro / Panier, Stéphane / Lomov, Stepan V. / Ehab Moustafa Kamel, Karim / Massart, Thierry J.	Automated reconstruction and conformal discretization of 3D woven composite CT scans with local fiber volume fraction control	112438
Suresh, M. / Sanders, A. / Prajapati, P. / Kaipa, K. / Kravchenko, O. G.	Composite sandwich repair using through-thickness reinforcement with robotic hand micro-drilling	112473
Sebaey, T. A. / Catalanotti, G. / Lopes, C. S. / O'Dowd, N.	Computational micromechanics of the effect of fibre misalignment on the longitudinal compression and shear properties of UD fibre-reinforced plastics	112487
Gliszczynski, A. / Bogenfeld, R. / Degenhardt, R. / Kubiak, T.	Corner impact and compression after impact (CAI) of thin-walled composite profile – An experimental study	112502
Shrivastava, Sachin / Sharma, Naresh / Tsai, Stephen W. / Mohite, P. M.	D and DD-drop layup optimization of aircraft wing panels under multi-load case design environment	112518
Yao, Jiawei / Zhang, Teng / Niu, Yifan	Effect of curing time on phase morphology and fracture toughness of PEK-C film interleaved carbon fibre/epoxy composite laminates	112550
Ghayour, Mohammadhossein / Hojjati, Mehdi / Ganesan, Rajamohan	Effect of tow gaps on impact strength of thin composite laminates made by Automated Fiber Placement: Experimental and semi-analytical approaches	112536
Eslami, Ghazaleh / Yanes-Armas, Sonia / Keller, Thomas	Energy dissipation in adhesive and bolted pultruded GFRP double-lap joints under cyclic loading	112496
Farrokh Ghatte, Hamid	External steel ties and CFRP jacketing effects on seismic performance and failure mechanisms of substandard rectangular RC columns	112542
Huang, Jun-Qi / Dai, Jian-Guo	Flexural performance of precast geopolymer concrete sandwich panel enabled by FRP connector	112563
Chen, Muhao / Skelton, Robert E.	A general approach to minimal mass tensegrity	112454
Ivañez, I. / Sánchez-Saez, S. / Garcia-Castillo, S. K. / Barbero, E. / Amaro, A. / Reis, P. N. B.	High-velocity impact behaviour of damaged sandwich plates with agglomerated cork core	112520
Lurie, S. / Volkov-Bogorodskiy, D. / Solyaev, Y. / Koshurina, A. / Krasheninnikov, M.	Impact behavior of a stiffened shell structure with optimized GFRP corrugated sandwich panel skins	112479
Chanteli, Angeliki / Bandaru, Aswani Kumar / Peeters, Daniël / Weaver, Paul M.	Influence of repass treatment on carbon fibre-reinforced PEEK composites manufactured using laser-assisted automatic tape placement	112539
Yan, Ruosi / Zhang, Qianyu / Shi, Bao / Qin, Zhigang / Wei, Sainan / Jia, Lixia	Investigating the integral-structure of HRBP/CHP/CF consisting of non-woven flexible inter/intra-ply hybrid composites: Compression, puncture-resistance, electromagnetic interference shielding effectiveness	112501
Zu, Lei / Xu, Hui / Zhang, Qian / Jia, Xiaolong / Jin, ShuMing / Li, Debao	Investigation on mechanical behavior of composite electromagnetic gun barrel based on the high tension winding	112521
Staab, Florian / Liesegang, Moritz / Balle, Frank	Local shear strength distribution of ultrasonically welded hybrid Aluminium to CFRP joints	112481
Zenzen, Roumaissa / Khatir, Samir / Belaidi, Idir / Le Thanh, Cuong / Abdel Wahab, Magd	A modified transmissibility indicator and Artificial Neural Network for damage identification and quantification in laminated composite structures	112497
Shi, Duoqi / Teng, Xuefeng / Jing, Xin / Lyu, Shuangqi / Yang, Xiaoguang	A multi-scale stochastic model for damage analysis and performance dispersion study of a 2.5D fiber-reinforced ceramic matrix composites	112549
Wang, Dan / Bai, Changqing / Zhang, Hongyan	Nonlinear vibrations of fluid-conveying FG cylindrical shells with piezoelectric actuator layer and subjected to external and piezoelectric parametric excitations	112437
Zhang, Zheng / Pei, Kai / Sun, Min / Wu, Helong / Yu, Xiaochen / Wu, Huaping / Jiang, Shaofei / Zhang, Feng	A novel solar tracking model integrated with bistable composite structures and bimetallic strips	112506
García-Guzmán, L. / Reinoso, J. / Valverde-González, A. / Martínez-Pañeda, E. / Távara, L.	Numerical study of interface cracking in composite structures using a novel geometrically nonlinear Linear Elastic Brittle Interface Model: Mixed-mode fracture conditions and application to structured interfaces	112495
Riccio, A. / Saputo, S. / Sellitto, A. / Di Caprio, F. / Di Palma, L.	A numerical-experimental assessment on a composite fuselage barrel vertical drop test: Induced damage onset and evolution	112519
Pavlovic, Ana / Sintoni, Davide / Minak, Giangiacomo / Fragassa, Cristiano	On the modal behaviour of ultralight composite sandwich automotive panels	112523
Gerendt, Christian / Dean, Aamir / Mahrholz, Thorsten / Englisch, Nils / Krause, Stefan / Rolfes, Raimund	On the progressive fatigue failure of mechanical composite joints: Numerical simulation and experimental validation	112488
Alfouneh, Mahmoud / Ji, Jinchen / Luo, Quantian	Optimal design of multi-cellular cores for sandwich panels under harmonic excitation	112507
Liu, Lulu / Wang, Xin / Wu, Zhishen / Keller, Thomas	Optimization of multi-directional fiber architecture for resistance and ductility of bolted FRP profile joints	112535
Auriga, Radosław / Gumowska, Aneta / Szymanowski, Karol / Wronka, Anita / Robles, Eduardo / Ocipka, Przemysław / Kowaluk, Grzegorz	Performance properties of plywood composites reinforced with carbon fibers	112533
Al-Dhaheri, M. / Khan, K. A. / Umer, R. / van Liempt, F. / Cantwell, W. J.	Process-induced deformation in U-shaped honeycomb aerospace composite structures	112503
Jamora, V. C. / Wu, K. C. / Kravchenko, O. G.	Residual deformation analysis in composite shell structures manufactured using automated fiber placement	112482
Li, Hang / Li, Hao / Xiao, Mi / Zhang, Yan / Fu, Junjian / Gao, Liang	Robust topology optimization of thermoelastic metamaterials considering hybrid uncertainties of material property	112477
Nie, X. F. / Zhang, S. S. / Chen, G. M. / Yu, T.	Strengthening of RC beams with rectangular web openings using externally bonded FRP: Numerical simulation	112552
Faal, R. T. / Sourki, R. / Crawford, B. / Vaziri, R. / Milani, A. S.	Using fractional derivatives for improved viscoelastic modeling of textile composites. Part II: Fabric under different temperatures	112494
Moita, José S. / Araújo, Aurélio L. / Franco Correia, Victor / Soares, Cristóvão M. Mota	Vibrations of functionally graded material axisymmetric shells	112489
Shen, Zhenxing / Liu, Cheng / Li, Huijian	Viscoelastic analysis of bistable composite shells via absolute nodal coordinate formulation	112537

Informations
sur cette fiche
IssueID
37738
Publié(e) le:
23.10.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - septembre 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - septembre 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.