ce/papers - v. 1, n. 2-3 (septembre 2017)

Publié:	septembre 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Rasmussen, Kim J. R. / Zhang, Hao	00.01: Future challenges and developments in the design of steel structures - an Australian perspective	81-94
Schafer, Benjamin William	00.02: Developments in research and assessment of steel structures: Highlights from the perspective of an American researcher	95-114
Mazzolani, Federico M.	00.03: European research on steel structures in seismic areas	115-132
Knobloch, Markus	00.04: Structural fire design - Developments in research and assessment of fire in steel and composite structures	133-142
Wald, František / Gödrich, Lukáš / Kurejková, Marta / Šabatka, Luboš / Kabeláč, Jaromír / Kojala, Drahoš	00.05: Validation and verification in design of structural steel connections	143-152
Polk, Henrik / Walker, Chris	00.06: Advances and development needs in the structural design of steel box girders for major bridges	153-164
Mohammadi, Mohammad Reza Shah / Matos, Rui / Rebelo, Carlos	01.02: Bobtail® bolt preload loss in wind turbine tower prototype: Hammerstein-Wiener identification model	175-184
Couchaux, Maël / Rodier, Anthony	01.03: Behaviour of bolted endplate connections of beams subjected to bi-axial bending moments and axial forces	185-194
Vicente, Guiomar / Simões, Rui / Rebelo, Carlos	01.04: Joints between open section beams and tubular columns: New configuration for semi-rigid and moment resistant bolted joints	195-204
Samaan, Rimon A. / El-Serwi, Ahmed A. I. / El-Hadary, Riham A.	01.05: Experimental and theoretical study of large capacity extended end-plate moment connection	205-214
Hasan, Mohammad Jobaer / Ashraf, Mahmud / Uy, Brian	01.07: Numerical investigation on the semi-rigid behaviour of austenitic stainless steel connections	215-224
Wang, Yan-Bo / Lyu, Yi-Fan / Li, Guo-Qiang	01.08: Bolted bearing connection with high strength steel and grade 12.9 bolt	225-233
Cai, Yancheng / Young, Ben	01.09: Transient state tests of cold-formed stainless steel bolted connections	234-242
Jakše, Bojan / Može, Primož	01.10: Different approaches towards numerical modelling of bolt bearing	243-252
Lisec, Damjan / Može, Primož	01.11: Numerical Analysis Of Full Strength Heavy Beam-to-column Bolted Connection	253-262
D'Aniello, Mario / Zimbru, Mariana / Latour, Massimo / Francavilla, Antonella / Landolfo, Raffaele / Piluso, Vincenzo / Rizzano, Gianvittorio	01.12: Development and validation of design criteria for free from damage steel joints	263-271
Cavène, Edouard / Durif, Sébastien / Bouchaïr, Abdelhamid / Toussaint, Evelyne	01.13: Experimental study of cover-plate bolted joints with large or slotted holes	272-281
Swierczyna, Szymon / Wuwer, Walter	01.14: Tests of alternately loaded single-cut joints with blind bolts	282-291
Jovašević, Slobodanka / Rebelo, Carlos / Pavlović, Marko / Veljkovic, Milan	01.15: Numerical investigation of preloaded gusset plate connections between polygonal built-up members	292-297
Pennec, Fabienne / Durif, Sébastien / Camara, Aliou Badara / Robert, Jean-Louis / Bouchaïr, Abdelhamid	01.16: Fatigue behaviour analysis of bolts in tee-stub steel connections	298-307
Barcewicz, Wioleta	01.17: Photogrammetric analysis of thin end-plate deformations in steel and composite joints	308-315
Cavallaro, Giovanni Ferrante / Francavilla, Antonella Bianca / Latour, Massimo / Piluso, Vincenzo / Rizzano, Gianvittorio	01.18: Optimization of the pre-loading procedure for high-strength bolts of FREEDAM connections	316-331
Cavallaro, Giovanni Ferrante / Francavilla, Antonella Bianca / Latour, Massimo / Piluso, Vincenzo / Rizzano, Gianvittorio	01.19: Cyclic behaviour of friction materials for FREEDAM connections	332-341
Stranghöner, Natalie / Jungbluth, Dominik / Afzali, Nariman	01.20: Preloading of stainless steel bolting assemblies	342-351
Couchaux, M. / Martin, P. O. / Rodier, A.	01.21: Static and cyclic behaviour of bolted gusset plate connections: Numerical and analytical modelling	352-361
Francavilla, Antonella B. / Latour, Massimo / Piluso, Vincenzo / Rizzano, Gianvittorio	01.23: Seismic design of full-strength full-ductility extended endplate beam-to-column joints	362-371
Aydın, Recep / Yuksel, Ercan / Yardımcı, Nesrin	01.24: Moment-resisting beam-to-column connections of corrugated web I sections	372-380
Ostrowski, Krzysztof / Kozłowski, Aleksander	01.25: The influence of end-plate joints stiffening on the rotation capacity	381-388
Skejic, Davor / Rizzano, Gianvittorio / Curkovic, Ivan	01.26: Reliability assessment of flange cleat beam-to-column joints	389-397
Lopez, M. / Loureiro, A. / Gutierrez, R. / Reinosa, J. M.	01.27: Numerical analysis E-stubs with four bolts per row	398-404
Vilela, Paula Moura Leite / Carvalho, Hermes / Queiroz, Gílson	01.28: Modelling of bolted connections by the finite element method	405-413
Stratan, Aurel / Maris, Cosmin / Dubina, Dan / Neagu, Calin	01.29: Experimental prequalification of bolted extended end plate beam to column connections with haunches	414-423
Nah, Hwan-Seon / Choi, Sung-Mo	01.30: Evaluation on clamping load of high strength bolts under ambient environment	424-432
Stroetmann, Richard / Kästner, Thoralf / Werner, Lars	02.01: Development of a new design approach for weldings	433-442
Gkatzogiannis, Stefanos / Knoedel, Peter / Ummenhofer, Thomas	02.02: FE welding residual stress simulation: Influence of boundary conditions and material models	443-452
Soltanzadeh, Hadi / Hildebrand, Jörg / Kraus, Matthias	02.03: A reliable modelling of thermal, microstructure, and stress in arc stud welding joints and effect on fatigue strength	453-460
Wudtke, Idna / Sirtl, Christin / Kraus, Matthias	02.04: Experimental and numerical analyses of butt-welded S460 joints	461-470
Chen, Ju / Zhu, Ji-Hua / Xu, Fei / Xue, Wen	02.05: Design of concrete-filled steel tubular longitudinal gusset plate connections	471-478
Sieber, Lars / Kilian, Andrè / Flederer, Holger / Göbel, Gunther / Steinhauser, Marco	02.06: Weldability of old mild steels within the rehabilitation of historical steel structures	479-488
Nilsson, Peter / Al-Emrani, Mohammad / Atashipour, Seyed Rasoul	02.07: A numerical approach to the rotational stiffness of stake welds	489-498
Andreassen, Michael Joachim / Yu, Zhenzhen / Liu, Stephen / Nielsen, Jens Henrik	02.08: The influence of plate thickness on the welding residual stresses from submerged arc welding in offshore steel structures	499-504
Ciupack, Yvonne / Ledecký, Lukáš / Pasternak, Hartmut / Fischer, Vitali / Stammen, Elisabeth / Dilger, Klaus	03.01: Bonded steel joints under cyclic loading: Study on structural behaviour und fatigue	505-513
Andrade, Pedro / Lagerqvist, Ove / Simões, Rui / Veljkovic, Milan	03.02: Structural assessment of a column splice with opened slotted holes: Finger Connection	514-521
Skalomenos, Konstantinos A. / Shimada, Hironari / Kurata, Masahiro / Nakashima, Masayoshi	03.03: Feasibility of hybrid simulation for testing steel connections of braces with intentional eccentricity	522-529
da Costa, Job Duarte / Obiala, Renata / Odenbreit, Christoph	03.05: Experimental investigations on semi-continuous encased composite joints	530-539
Pettersson, Frida / Rassati, Gian A. / Swanson, James A. / Burns, Thomas M.	03.06: A study on the behaviour of steel beam-column connections to deep wide flange columns for seismic applications	540-549
Malendowski, Michał / Burgess, Ian / Glema, Adam	03.07: Robustness in fire of a new type of beam-to-column connection	550-559
Zimbru, Mariana / D'Aniello, Mario / Cabrera, Eliana Inca / Landolfo, Raffaele / De Martino, Attilio	03.09: Performance assessment and design methodology of free from damage moment resisting frames	560-569
Tartaglia, Roberto / D'Aniello, Mario / Costanzo, Silvia / Landolfo, Raffaele / De Martino, Attilio	03.10: Seismic design and performance of extended stiffened end-plate joints	570-579
D'Antimo, Marina / Demonceau, Jean-François / Latour, Massimo / Rizzano, Gianvittorio / Jaspart, Jean-Pierre	03.11: Experimental investigation of the creep effect on prestressed bolts used in innovative friction connections	580-589
Mähr, Tobias / Espinha, Miguel / Ziegler, René	03.12: Global structural modelling of space frame structures with consideration of joint behaviour: An integral analysis approach	590-598
Budaházy, Viktor / Dunai, László	03.13: Experimental study on cyclic plastic behaviour of steel joint components	599-608
Ben Larbi, A. / Couchaux, M. / Bouchaïr, A.	03.14: Steel connections with thermal barrier for nearly zero-energy buildings (NZEB)	609-618
Gryniewicz, Marcin / Szlendak, Jerzy Kazimierz	03.15: Experimental tests and model study on self-drilling screws connections subjected to shear	619-628
Manoleas, Panagiotis / Koltsakis, Efthymios / Veljkovic, Milan	03.16: Multiplanar K-joints on cold-formed open sections: An experimental study with high strength steels	629-638
Kurejková, Marta / Wald, František / Šabatka, Lubomír / Kabeláč, Jaromír	03.17: Design of haunches in structural steel joints	639-648
de Macedo, Rafael Scudelari / de Macedo, Luiz Francisco Scudelari	03.18: Anchor bolt tensile load distribution: Effects of the column base-plate design: Wide flange column bases - loading on additional line of bolts	649-658
Tartaglia, Roberto / D'Aniello, Mario / Rassati, Gian A. / Swanson, James A. / Landolfo, Raffaele	03.19: Seismic performance of full strength extended stiffened joint: American vs New European approach	659-668
Giordano, Saverio / Gusella, Federico / Lavacchini, Giovanni / Orlando, Maurizio / Spinelli, Paolo	03.20: Experimental tests on beam-end connectors of cold-formed steel storage pallet racks	669-678
Machalická, Klára / Eliasova, Martina / Vokáč, Miroslav	03.21: Structural glued connections with different metal substrates	679-684
Cao, Shi / Shu, Ganping / Lin, Kunhong / Qin, Ying / Fan, Shenggang	03.22: Calculation model for moment -rotation relationship of bottom-through-diaphragm top-ring connection between SST columns and HSS beams	685-692
Zapata, Luis Miguel / Graciano, Carlos	03.24: Compressive strength of transverse and longitudinal T-type branch plate-to-circular hollow section connections	693-701
Nobari, Hesam Bafandeh / Akbari Hamed, Arash	03.25: On the seismic behavior of the HBS and RBS moment connections	702-710
Santos, Ana Francisca / Santiago, Aldina / da Silva, Luís Simões / Latour, Massimo / Rizzano, Gianvittorio	03.26: Experimental assessment of friction dampers under impact loading	711-720
Wang, Yongchang / Yu, Junlong	03.27: Punching shear behaviour of an innovative connection between steel tubular column to flat concrete slab	721-728
Bayo, Eduardo / Loureiro, Alfonso / Lopez, Manuel	03.28: Performance of cruciform finite elements that model 2D steel joints with beams of unequal depth in frame analysis	729-738
Bujnak, Jan / Farbak, Matus	03.29: Behaviour of the short headed anchors with supplementary reinforcement	739-745
Reza Chenaghlou, Mohammad / Akbari Hamed, Arash	03.30: Connection classification for a space structure jointing system	746-755
Zhang, Yanxia. / Liu, Anran. / Shao, Dinan. / Liu, Xuechun.	03.31: Influence of design parameters on mechanic behavior of prefabircated self-centering beam-column connection with a bolted web friction device	756-765
Hasan, Mohammad Jobaer / Ashraf, Mahmud / Uy, Brian	03.32: Analytical prediction of moment-rotation behaviour of austenitic stainless steel bolted connections	766-775
Kanyilmaz, Alper / Castiglioni, Carlo Andrea / Brambilla, Giovanni / Gjoka, Kristian / Galazzi, Andrea / Raso, Sergio / Valli, Alberto / Brugnolli, Marco / Hojda, Ralf	03.33: Experimental assessment of tolerances for the fabrication of laser-cut steel joints	776-785
Reinosa, José M. / Loureiro, A. / Gutierrez, R. / Lopez, M.	03.34: European stiffened angle connections: Numerical study	786-790
Tide, Raymond H. R.	03.35: Rivet shear strength in long connections	791-800
Mahamid, Mustafa / Hijaj, Mutaz Al / Rahman, Adeeb / Malhas, Faris	03.36: Skewed extended shear tab connections: Behavior, analysis and parametric study	801-810
Fajuyitan, O. Kunle / Sadowski, Adam J. / Wadee, M. Ahmer	04.01: Buckling of very short elastic cylinders with weld imperfections under uniform bending	811-820
Rohr, Katharina / Knoedel, Peter / Ummenhofer, Thomas	04.02: Plastic behaviour of polygonal hollow sections in bending	821-827
Gorbachov, Anna / Stranghöner, Natalie / Rotter, J. Michael	04.03: Buckling behaviour of axially compressed cylindrical shells made of stainless steel	828-837
Wang, Jie / Sadowski, Adam J.	04.04: Buckling of elastic cylindrical shells under symmetric but non-uniform bending moment distributions	838-847
Maslak, Mariusz / Pazdanowski, Michal / Siudut, Janusz / Tarsa, Krzysztof	04.05: Analysis type influence on the durability prognosis for a steel tank corroded shell	848-857
Hansen, Thomas	04.06: Post-buckling strength of plate girders subjected to shear: Experimental verification	858-867
Jäger-Cañás, Andreas / Pasternak, Hartmut	04.07: On the axial buckling of very thin-walled cylindrical shells	868-877
Pourostad, Vahid / Zizza, Antonio / Kuhlmann, Ulrike	04.08: Investigations on the buckling behaviour of slender high strength steel plates under multiaxial stresses	878-887
Ljubinković, Filip / Martins, João Pedro / da Silva, Luís Simões	04.09: Cylindrically curved steel panels in bridge design: Buckling and post-buckling behaviour under shear stresses	888-897
Piculin, Sara / Sinur, Franc / Može, Primož	04.10: Analysis of stiffened curved panels in compression: A preliminary numerical study for experimental tests	898-907
Rotter, J. Michael / Al Lawati, Hussain	04.11: Strength enhancement in axially compressed cylinders with stepped walls	908-917
Zeybek, Özer / Topkaya, Cem / Rotter, J. Michael	04.12: Analysis of silo supporting ring beams: Resting on discrete supports	918-927
Jäger-Cañás, Andreas / Pasternak, Hartmut	04.13: Influence of closely spaced ring-stiffeners on the axial buckling behavior of cylindrical shells	928-937
Ecker, Alexander / Unterweger, Harald	04.14: Transfer of axial loads in penstocks: Load carrying behaviour with and without thrust rings	938-947
Gresnigt, Nol / van Es, Sjors / Karamanos, Spyros / Vasilikis, Daniel	04.15: New design rules for tubes in combined walls in EN1993-5	948-959
Knoedel, Peter / Ummenhofer, Thomas / Rotter, J. Michael	04.16: Rethinking imperfections in tanks and silos	960-969
Sabau, Gabriel / Koltsakis, Efthymios / Lagerqvist, Ove	04.17: Cylindrical shell buckling under a hydraulic constraint: Numerical study	970-979
Słowiński, Kamil / Piekarczyk, Marek	04.18: Determination of the plastic limit load for a cylindrical shell under general loading conditions using FEA	980-989
Jármai, Károly / Farkas, József	04.19: Cost comparison of welded cellular plated square box and cellular shell column structures	990-999
Brown, C. J. / Goodey, R. J. / Rotter, J. Michael	04.20: Bending of rectangular plates subject to non-uniform pressure distributions relevant to containment structures	1000-1009
Błażejewski, Paweł / Marcinowski, Jakub / Rotter, Michael	04.21: Buckling of externally pressurised spherical shells: Experimental results compared with recent design recommendations	1010-1018
Unterweger, Harald / Kampleitner, Andreas	05.01: Lattice girders with I-sections and slotted gusset plates: Load carrying behaviour and ultimate capacity of compression members based on full scale girder tests	1019-1028
Kraus, Matthias / Mämpel, Silvio / Crisan, Andrei	05.02: Influence of rails on the stability of crane runway girders	1029-1038
Launert, Benjamin / Pasternak, Hartmut	05.03: Weld residual stresses effects in the design of welded plate girders: Simulation and Implementation	1039-1047
Židlický, Břetislav / Jandera, Michal	05.04: Combined loading of slender stainless steel SHS/RHS members	1048-1055
Du, Zuo-Lei / Liu, Yao-Peng / Chan, Siu-Lai / Tan, Wei-Qi	05.05: A flexibility-based element for second-order inelastic analysis using plastic hinge method	1056-1065
Kucukler, Merih / Gardner, Leroy / Macorini, Lorenzo	05.06: Design of web-tapered steel members through a stiffness reduction method	1066-1075
Walter, Adrian / Herbersagen, Julia / Winkler, Rebekka / Knobloch, Markus	05.07: Structural behaviour of simple steel beams subject to axial compression, biaxial bending moments and torsion	1076-1085
Balázs, Ivan / Melcher, Jindrich	05.08: Lateral-torsional buckling of beams of monosymmetrical cross-sections loaded perpendicularly to the axis of symmetry: Theoretical analysis	1086-1095
Aoyama, Masahiro / Mitsui, Kazuya / Sato, Atsushi	05.09: Experiment study on square steel tubular columns: Under compressive axial force with monotonic antisymmetric bending moment	1096-1105
Tankova, Trayana / Martins, João Pedro / da Silva, Luís Simões / Marques, Liliana	05.10: Numerical model for the buckling behaviour of tapered steel members based on experimental tests	1106-1115
Naohiro, Wada / Kikuo, Ikarashi / Tadayoshi, Okada / Yosuke, Kawabata	05.11: Local buckling behavior of octagonal hollow cross-section member under axial compression or bending shear	1116-1122
Mitsui, Kazuya / Sato, Atsushi / Aoyama, Masahiro	05.12: Effect of initial imperfection on elasto-plastic behavior of SHS columns under axial force with bending moment	1123-1132
Liu, Si-Wei / Liu, Yao-Peng / Chen, Liang / Chan, Siu-Lai	05.13: Efficient static and dynamic analysis of steel frames by one-element-per-member models	1133-1142
Unterweger, Harald / Kettler, Markus / Loschan, Sarah	05.14: Lateral torsional buckling of steel beams: Effect of discrete flexible intermediate supports at the upper flange	1143-1151
Rotter, John Michael / Sadowski, Adam Jan	05.15: Development of circular tube slenderness classifications under axial and bending actions	1152-1161
Pourkhorshidi, Sara / Abedi, Karim	05.16: Stability behavior of graded dented cylindrical steel shells under the action of combined external and axial pressure	1162-1171
Rosson, Barry	05.17: Modeling the stiffness reduction conditions of steel beam-columns	1172-1181
Dobrić, Jelena / Marković, Zlatko / Budjevac, Dragan / Spremic, Milan	05.18: Maximum chord slenderness ratio of compressed stainless steel closely spaced built-up members	1182-1189
Kuś, Juliusz	05.19: Lateral-torsional buckling of steel beams with tapered flanges and web	1190-1198
Kövesdi, Balázs / Somodi, Balázs	05.20: Modified Ayrton-Perry formula for flexural buckling of HSS welded box sections	1199-1208
Kettler, Markus / Unterweger, Harald	05.21: Bolted steel angles in compression: Influence of realistic end supports	1209-1218
Pichal, Radek / Machacek, Josef	05.22: Stainless steel prestressed stayed columns	1219-1224
Yu, Jialiang / Wadee, M. Ahmer	05.23: Optimal prestressing of triple-bay prestressed stayed columns	1225-1234
Mercier, Charlotte / Khelil, Abdelouahab / Pamies, Alain	05.24: New interaction formulae for sensitive structures to the second order effects	1235-1244
Zhang, Yue / Yang, Bo / Xiong, Gang / Elchalakani, Mohamed / Nie, Shidong	05.25: Lateral torsional buckling investigation on welded Q460GJ structural steel unrestrained singly-symmetric beams under a point load	1245-1254
Schillo, Nicole / Taras, Andreas / Feldmann, Markus	05.26: Reliability assessment for local buckling of plates	1255-1264
Giżejowski, Marian Antoni / Szczerba, Radosław Bronisław / Gajewski, Marcin Daniel	05.27: Resistance of mono-axially bent beams of welded I-sections: FEM verification of Eurocode's buckling curve formulation	1265-1274
Sato, Atsushi / Ono, Tetsuro	05.28: Deformation capacity of steel column under combined loading: Compressive axial force with double curvature bending moment	1275-1284
Rendall, Morgan A. / Hancock, Gregory J. / Rasmussen, Kim J. R.	05.29: Interaction curves for local and distortional buckling of polygonal tubes in combined torsion and axial loading	1285-1294
Krajewski, Marcin / Iwicki, Piotr	05.30: Stability and load bearing capacity of a braced truss under upward wind loading	1295-1304
Winkel, Jort / Kostis, Nikolaos / Peters, Dirk Jan / van Es, Sjors Harry Jan	05.31: Experiments and fem-simulations of local buckling of sand-filled tubular piles	1305-1314
Poursharifi, Maryam / Abedi, Karim / Chenaghloua, Mohammadreza	05.32: Experimental and numerical study on the collapse behavior of an all-steel accordion force limiting device	1315-1324
Giżejowski, Marian Antoni / Szczerba, Radosław Bronisław / Gajewski, Marcin Daniel	05.33: LTB resistance of rolled I-section beams: FEM verification of Eurocode's buckling curve formulation	1325-1334
De Backer, Hans / Mys, Jan / Van Puymbroeck, Evy	05.34: Influence of temporary bridge decks on continuously welded rails	1335-1343
van Hove, B. W. E. M. Dianne / Snijder, H. H. Bert / Hofmeyer, Herm / Altinga, Noud	05.35: Extended design method for in-plane stability of haunched sway portal frames	1344-1352
Lemes, Ígor José Mendes / Barros, Rafael Cesário / Batelo, Everton André Pimentel / da Mota Silveira, Ricardo Azoubel	05.36: An efficient approach to limiting the elastic range in advanced analysis of steel structures via RPHM	1353-1362
Krystosik, Przemysław	05.37: On stability of unbraced steel frames with semi-rigid joints	1363-1370
Yoshimoto, Shun / Sato, Atsushi	05.38: Design procedure development of light gauge built-up beam to ensuer yield bending strength: Antisymmetric bending moment	1371-1380
Nedelcu, Mihai / Mureşan, Adina-Ana	05.39: GBT-based Finite Element formulation for elastic buckling analysis of conical shells	1381-1389
Zhang, Ailin / Zhang, Qingfang / Jiang, Ziqin	05.40: Warping constant equations for hot rolled steel channel sections	1390-1398
Pantazi, Vasiliki S. / Sophianopoulos, Dimitrios S.	05.41: A unified catastrophe theory approach for the in-plane buckling of steel arches under point gravitational loading	1399-1406
Sato, Kosuke / Ikarashi, Kikuo	05.42: Evaluation of ultimate strength and plastic deformation capacity of square hollow section members under bending shear	1407-1416
Horáček, Martin / Melcher, Jindrich	05.43: Lateral-torsional buckling of beams of double symmetrical and mono-symmetrical cross-sections loaded perpendicularly to the axis of symmetry: Experimental verification	1417-1426
Unterweger, Harald / Schörghofer, DI Andreas / Taras, Andreas	06.01: Critical bridges in high-speed railway lines: Systematic identification for specific trains	1427-1436
Ferraioli, Massimiliano / Lavino, Angelo / Mandara, Alberto	06.03: Dynamic increase factor for nonlinear static alternate path analysis of steel moment-resisting frames against progressive collapse	1437-1446
Castellano, M. Gabriella / Borella, Rudy / Pigouni, Aikaterini E. / Infanti, Samuele	06.05: Wind and Earthquake Damping System for the Isozaki/Allianz Tower in Milan, Italy	1447-1456
Liu, Airong / Liu, Chun-Hui / Pi, Yong-Lin / Huang, Yong-Hui	06.06: Vibration reduction of steel girder bridges: Using shape memory alloy cables	1457-1462
Erkmen, Bulent	06.07: Comparison of Blast Performance of Steel Modular Buildings with Anchored and Sliding Foundations	1463-1472
Mualla, Imad / Koss, Holger	06.08: Vibration Control of Novel Passive Multi-joints Rotational Friction Dampers	1473-1482
Nguyen, Van Vinh / Hancock, Gregory J. / Pham, Cao Hung	07.01: New developments in the Direct Strength Method (DSM) for design of cold-formed steel sections under localised loading	1483-1492
Martins, André Dias / Camotim, Dinar / Gonçalves, Rodrigo / Dinis, Pedro Borges	07.02: Distortional-global interaction in lipped channel beams: Part I: Mechanics and elastic behaviour	1493-1502
Martins, André Dias / Camotim, Dinar / Dinis, Pedro Borges	07.03: Distortional-global interaction in lipped channel beams: Part II: Strength, relevance and DSM design	1503-1512
Steau, Edward / Keerthan, Poologanathan / Mahendran, Mahen	07.04: Web crippling design of hollow flange channel beams under one flange load cases	1513-1522
Kathekeyan, Myuran / Mahendran, Mahen	07.05: Fatigue life assessment of cold-formed steel roof battens	1523-1532
dos Santos, Gabriel B. / Gardner, Leroy / Kucukler, Merih	07.06: Numerical determination of plastic collapse loads for sections under concentrated transverse forces	1533-1542
Kechidi, Smail / Fratamico, David C. / Bourahla, Nouredine / Castro, José M. / Schafer, Benjamin W.	07.07: Numerical study of screw fasteners in built-up CFS chord studs	1543-1552
Merkl, Christian / Toffolon, Andrea / Taras, Andreas	07.08: Experimental and numerical study of the behaviour of eccentrically loaded cold-formed channel sections - determination of an optimal load eccentricity	1553-1562
Šorf, Marek / Jandera, Michal	07.09: Trapezoidal sheet hangers and concentrated or linear load distribution in profiled sheeting	1563-1570
Takahashi, Daimu / Ikarashi, Kikuo / Kobashi, Tomoki	07.10: Elastic buckling strength of light-gauge built-up member from lipped C-section under compression	1571-1579
natesan, vijayakumar / Madhavan, Mahendrakumar	07.11: Rotational behavior of cold formed steel beams connected through clip angles	1580-1589
Pham, Song Hong / Pham, Cao Hung / Hancock, Gregory J.	07.12: On the design of cold-formed steel beams with holes in shear using the direct strength method	1590-1599
Abbasi, Mandana / Khezri, Mani / Rasmussen, Kim J. R.	07.13: On extending the direct strength method to the design of cold-formed steel built-up columns	1600-1608
Pastor, Ma Magdalena / Bonada, Jordi / Roure, Francesc / Casafont, Miquel / Somalo, Ma Rosa	07.14: Rack uprights under combined compression and bi-axial bending: Experimental testing, numerical analysis and European standard approach	1609-1616
Meza, Francisco / Becque, Jurgen	07.15: Experimental and numerical investigation of cold-formed steel built-up stub columns	1617-1626
Crisan, Andrei / Kraus, Matthias / Handabut, Andreea	07.16: On the distortional buckling capacity of pallet rack uprights	1627-1636
Shaheen, Mahmoud S. A. / Rasmussen, Kim J. R.	07.17: Design methods for drive-in steel storage racks	1637-1646
Hegyi, Péter / Dunai, László	07.18: Cold-formed C-sections encased in ultra-lightweight concrete: Development of a Eurocode-based design method	1647-1656
Selvaraj, Sivaganesh / Madhavan, Mahendrakumar	07.19: Geometric imperfection measurements on cold-formed steel channels: An approach using 3D non-contact laser scanner	1657-1666
Khezri, Mani / Abbasi, Mandana / Rasmussen, Kim J. R.	07.20: Application of the compound strip method in buckling analysis of cold-formed steel built-up sections	1667-1676
Balázs, Ivan / Melcher, Jindrich / Belica, Andrej / Oly, René / Misiek, Thomas	07.21: Experimental setups for the measurement of the rotational restraint provided to cold-formed Z-purlins by sandwich panels	1677-1686
Hoang, Trung / Ádány, Sándor	07.22: On the use of constrained finite element method in the design of cold-formed steel Z purlins	1687-1696
Kathekeyan, Myuran / Mahendran, Mahen / Sivapathasundaram, Mayooran	07.23: Effect of loading rate on the pull-through capacities of cold-formed steel roof battens	1697-1706
Selvaraj, Sivaganesh / Madhavan, Mahendrakumar	07.24: Behaviour of gypsum sheathed cold-formed steel stud walls under lateral loadings	1707-1715
von der Heyden, Aaron / Lange, Jörg	07.25: Assessment of the utilisation of corrugated cardboard as a core material for sandwich panels	1716-1725
Craveiro, Helder / Ribeiro, João / Breda, Ricardo	07.26: Structural analysis of C and I shaped cold-formed steel columns	1726-1735
Georgescu, Mircea / Ungureanu, Viorel / Gruin, Aurelian / Floricel, Andra	07.27: Experimental and theoretical investigation on the local collapse of liner trays	1736-1745
Misiek, Thomas / Käpplein, Saskia	07.28: Fastening to face sheets of sandwich panels	1746-1755
Hassan, Muhammad Shariq / Salawdeh, Suhaib / Goggins, Jamie	07.29: A unified methodology for the modelling of steel behaviour: An application-oriented methodology	1756-1765
Belyy, Grigoriy / Kuznetsov, Aleksei	07.30: Ways of improving the stability design calculations of cold-formed columns	1766-1775
Dias, Yomal / Keerthan, Poologanathan / Mahendran, Mahen	07.31: Fire performance of LSF walls with web stiffened channel sections using finite element analysis	1776-1785
Govindan, Senthil kumar / Madhavan, Mahendrakumar	07.32: The flexural strength behavior of profiled steel sheet - with hot rolled plate panel system with bolted connection	1786-1795
Gutierrez, R. / Loureiro, A. / Reinosa, J. M. / Lopez, M.	07.34: Influence of semi-rigid sleeve joints on the multi-span purlin design	1796-1801
Aghoury, M. El. / Hanna, M. T. / Amoush, E. A.	07.36: Strength of combined sigma cold formed section columns	1802-1811
Lendvai, Anita / Joó, Attila László	07.37: Development in calculation of stressed skin effect upon experimental and numerical research results	1812-1821
Hansen, Anders Bau / Jönsson, Jeppe	07.38: A GBT-framework towards modal modelling of steel structures	1822-1830
Braun, Matthias / Obiala, Renata / Odenbreit, Christoph	08.01: Numerical simulation of the load bearing behaviour of concrete dowels in slim-floor construction - CoSFB	1831-1840
Neto, C. / Costa-Neves, L. F. / Vellasco, P. C. G. da S. / Jordão, S. / Ihaddoudene, A. N. T.	08.02: Experimental research of multiple perfobond connectors for composite girders	1841-1850
Odenbreit, Christoph / Nellinger, Sebastian	08.03: Mechanical model to predict the resistance of the shear connection in composite beams with deep steel decking	1851-1858
Schäfer, Markus	08.04: Limits of plastic design for composite beams: Requirements for slim and compact composite sections	1859-1868
Liew, J. Y. Richard / Xiong, Mingxiang / Wang, Yan-Bo	08.05: Design of high strength concrete filled tubular columns	1869-1878
Bogdan, Teodora / Gerardy, Jean-Claude / Davies, Donald W. / Popa, Nicoleta	08.07: Performance and capacity of composite "mega columns” with encased hot rolled steel sections	1879-1888
Pavlović, Marko / Veljkovic, Milan	08.08: Prefabricated demountable concrete and FRP decks in composite structures	1889-1898
Kyvelou, Pinelopi / Gardner, Leroy / Nethercot, David A.	08.09: Design of cold-formed steel composite flooring systems with partial shear connection	1899-1908
Lauwens, Kathleen / Douchy, Jonas / Fortan, Maarten / Arrayago, Itsaso / Mirambell, Enrique / Van Gysel, Ann / Rossi, Barbara	08.10: Experimental study of ferritic stainless steel composite slabs	1909-1918
Plumier, André / Degée, Hervé	08.11: The SMARTCOCO project: A research push for hybrid structures	1919-1928
Dürr, André / Gong, Fengyan / Bartenbach, Jochen	08.12: Mega composite columns in plant construction	1929-1938
Vogiatzis, Tzanetis / Avdelas, Aris	08.13: Structural performance assessment of steel frames with reinforced concrete walls	1939-1947
Varsani, Harshad / Tan, Ee Loon / Singh, Balbir	08.14: Behaviour of innovative demountable shear connectors subjected to combined shear and axial tension	1948-1955
Lam, Dennis / Yang, Jie / Mohammed, Asif	08.15: Axial behaviour of concrete filled lean duplex stainless steel square hollow sections	1956-1965
Wolters, Kevin / Kopp, Maik / Feldmann, Markus / Claßen, Martin / Schäfer, Johannes	08.16: Static shear capacity of small-scaled pin shear connectors	1966-1975
Lume, Gavin / Rasmussen, Kim J. R. / Tao, Zhong / Han, Lin-Hai	08.17: Experimental behaviour of high-strength thin-walled concrete filled steel tubular stub columns	1976-1985
Vătăman, Adina / Ciutina, Adrian / Grecea, Daniel	08.18: Influence of composite beams on the seismic behaviour of EBF	1986-1995
Wang, Fangying / Young, Ben / Gardner, Leroy	08.19: Tests on concrete-filled double skin tubular beams with circular stainless steel outer tubes	1996-2005
Kvočák, Vincent / Dubecký, Daniel / Kožlejová, Viktória	08.20: Experimental verification of composite action using push-out tests	2006-2012
Hirama, Chihiro / Ishikawa, Takashige / Hisagi, Akie	08.21: Shear strength of headed stud push-out tests: Comprehensive literature review focusing on slab type, failure mode, and large-diameter headed stud	2013-2022
Wu, Bo / Peng, Chengwei	08.22: Axially compressive behaviours of steel tubes filled with post-pouring concrete and precast segments containing DCLs and FC	2023-2030
Moharram, Moustafa I. / Bompa, Dan V. / Elghazouli, Ahmed Y.	08.23: Performance and design of shear-keys in hybid RC beam and steel column systems	2031-2040
Fasan, Marco / Bedon, Chiara / Amadio, Claudio	08.25: The influence of the concrete slab on the behaviour of steel-concrete composite joints for braced frames	2041-2050
Chiniforush, Alireza A. / Valipour, Hamid / Akbarnezhad, Ali / Bradford, Mark	08.27: Steel-timber composite (STC) beams: Numerical simulation of long-term behaviour	2051-2059
Feidaki, Eliza / Vasdravellis, George	08.28: Push out tests of a novel shear connection mechanism for use in demountable precast composite beams	2060-2069
Wang, Fangying / Young, Ben / Gardner, Leroy	08.29: Experimental investigation of concrete-filled double skin tubular stub columns with ferritic stainless steel outer tubes	2070-2079
Gluhović, Nina / Marković, Zlatko / Spremic, Milan / Pavlović, Marko	08.30: Experimental investigation and specific behaviour of X-HVB shear connectors in prefabricated composite decks	2080-2089
Grzeszykowski, Bartosz / Szmigiera, Elżbieta Danuta	08.31: Analysis of the load transfer between materials in composite concrete encased steel columns loaded axially	2090-2099
Kovács, Nauzika / Kövesdi, Balázs / Kachichian, Mansour / Frank, Máté Ferenc	08.33: Full scale test on steel-concrete composite beams: Investigation of innovative shear connectors	2100-2109
Wan, Haiying / Feng, Ran / Li, Tangying	08.34: Influence of profiled steel sheet on the load-carrying capacity of concrete composite slabs with rebar truss	2110-2119
Farahi, Mojtaba / Heidarpour, Amin / Zhao, Xiao-Ling / Al-Mahaidi, Riadh	08.35: Compressive behavior of concrete filled double skin sections consisting of corrugated plates and ultra-high strength steel corner tubes	2120-2127
Jiang, Yadong / Kalemi, Bledar / Silva, António / Castro, José Miguel / Monteiro, Ricardo	08.36: Numerical modelling of circular CFST members and assessment of multi-axial stress state effects	2128-2137
Ibañez, Carmen / Piquer, Ana / Hernández-Figueirido, David / Martínez-Ramos, Óscar	08.37: Experimental analysis of concrete-filled double skin tubular columns subjected to eccentric loads	2138-2146
Silva, António / Jiang, Yadong / Castro, José Miguel / Monteiro, Ricardo	08.38: Experimental characterisation of the flexural behaviour of rubberized concrete-filled steel tubular members	2147-2156
Dan, Daniel / Stoian, Valeriu / Florut, Sorin-Codrut / Fabian, Alexandru / Boita, Emanuela	08.39: Experimental investigations on performance enhancement of composite steel concrete shear walls by using steel fibre reinforced concrete	2157-2165
Chen, Juan / Nie, Jianguo / Zhou, Chengye	08.40: Numerical investigation of mechanical properties of multi-planar concrete-filled steel tubular joints	2166-2175
Taniguchi, Nozomu / Satake, Shinya / Lin, Weiwei / Hiroe, Masaaki / Kubo, Takeaki	08.41: Renewal method for aged steel bridges with polymer cement mortar	2176-2182
Denoord, Luke / Varsani, Harshad / Tan, Ee Loon / Singh, Balbir	08.42: Composite behaviour of headed stud shear connectors with BubbleDeck flooring	2183-2189
Kang, Ji-Su / Ju, Jeong-Su / Hwang, Seul-Ki / Park, Yong-Pil / Yom, Kyong-Soo / Choi, Sung-Mo	08.43: Composite effect of binding frames installed inside composite mega column (more than 1m in width)	2190-2199
Yamanaka, Moe / Ikarashi, Kikuo / Inaba, Toru	08.44: Elastic buckling behavior of the surface material in sandwich structure	2200-2209
Albareda-Valls, Albert / Maristany Carreras, Jordi / Carrera, David Garcia	08.46: Local buckling of thin-walled tubes encased in concrete	2210-2219
Hernández-Figueirido, David / Ibañez, Carmen / Piquer, Ana / Martínez-Ramos, Óscar	08.47: Experimental study of cross-section shape and infill influence on CFST stub columns subjected to axial load	2220-2226
Elmatzoglou, Michaela / Avdelas, Aris	08.48: Double-steel plate composite shear walls: In-plane seismic behaviour	2227-2236
Spremic, Milan / Gluhović, Nina / Marković, Zlatko / Dobrić, Jelena / Filipović, Aljoša	08.49: Comparison of headed studs with perfobond shear connectors - experimental and numerical analysis	2237-2246
Rana, Mohammad M. / Lee, Chi King / Al-deen, Safat	08.50: A study on the bond stress-slip behavior between engineered cementitious composites and structural steel sections	2247-2256
Chen, Kang / Tan, Kang Hai / Yang, Bo	08.51: An experimental study of composite beam-column joints subject to impact loads	2257-2266
Hwang, Ju-young / Kwak, Hyo-Gyoung	08.52: Numerical modeling of circular CFT columns with experimental verification	2267-2272
Partov, Doncho / Kantchev, Vesselin	08.53: Integral analysis of steel concrete beams, Regarding creep of concrete according EC2, versus (AAEMM) of bažant	2273-2282
Jurkiewiez, Bruno / Durif, Sébastien / Bouchaïr, Abdelhamid	08.54: Behaviour of steel-timber beam in bending	2283-2291
Abspoel, Roland / Stark, Jan / Prins, Henk	08.56: Horizontal distribution of concentrated loads in ComFlor210 composite slabs	2292-2301
Evirgen, Burak / Tuncan, Mustafa / Tuncan, Ahmet	08.57: The friction investigation of CFRP confined CFST specimens with modified concrete	2302-2309
Bompa, Dan V. / Elghazouli, Ahmed Y.	08.58: Ultimate behaviour and design of hybrid flat slabs with steel shear heads	2310-2319
Dragan, Dan / Plumier, André / Degée, Hervé	08.59: Shear behavior of concrete walls reinforced by multiple steel profiles Calibration of numerical model	2320-2328
Classen, Martin / Christou, Georgios / Hegger, Josef	08.60: Composite dowels in cracked concrete Experimental investigation	2329-2338
Ranzi, Gianluca	08.61: A new approach for the serviceability limit state design of composite steel-concrete slabs	2339-2348
Taras, Andreas / Unterweger, Harald	09.01: Numerical methods for the fatigue assessment of welded joints - influence of misalignment and geometric weld imperfections	2349-2358
Zanon, Gabriele / Bursi, Oreste S. / Scardi, Paolo / D'Incau, Mirco / Raso, Sergio	09.02: Effects of laser cutting on the cut-edge properties of structural steel S355N subjected to high-cycle fatigue	2359-2367
Dürr, André / Bucak, Ömer / Roth, Jakob	09.03: Size effect of as-welded and post-weld treated construction details under fatigue loading	2368-2377
Wu, Weijian / Kolstein, Henk / Veljkovic, Milan / Pijpers, Richard / Vorstenbosch-Krabbe, Jos	09.04: Fatigue behaviour of the closed rib to deck and crossbeam joint in a newly designed orthotropic bridge deck	2378-2387
Kugler, Paul / Unterweger, Harald	09.05: Remaining fatigue life of steel railway bridges: Improved models for considering realistic behaviour	2388-2397
Ono, Yuki / Kinoshita, Koji / Ceballos, Sean	09.06: Continuous fatigue test of welded joint taken from SBHS700 girder specimen	2398-2403
Dias-da-Costa, Daniel / Pham, Tien Dat / Tu, John / Pham, Cao Hung / Hancock, Gregory J. / Proust, Gwenaelle	09.07: Observations on fracture toughness measurement: At the corners of G450 cold-formed steel channel sections subjected to Tension	2404-2413
Papatheocharis, Theocharis / Chatzopoulou, Giannoula / Karamanos, Spyros A. / Perdikaris, Philip C.	09.08: Structural behaviour of steel seismic links under strong cyclic loading	2414-2423
Mecséri, Balázs József / Kövesdi, Balázs	09.09: Experimental fatigue analysis of high strength steel structures	2424-2433
Ribeiro, João / Santiago, Aldina / Rigueiro, Constança	09.10: Shear damage evaluation of bolted steel joints	2434-2443
Sun, Feifei / Xiao, Ben / Zhang, Yunfeng	09.11: Acoustic emission signal characteristics of damage accumulation in non-buckling steel plate shear wall	2444-2450
Sieber, Lars / Stroetmann, Richard	09.12: Assessment of old mild steel structures related to brittle fracture	2451-2460
Tibolt, Mike / Kühn, Bertram / May, Marc	09.13: The right choice of steel: Towards an optimized choice of the steel grade for toughness assessment	2461-2470
Farreras-Alcover, Isaac / Sørensen, Paw Lee / Bitsch, Niels	09.15: Fatigue life prediction of New Little Belt Bridge steel deck under a cracked pavement section: Comparison between a monitoring-based and a FE modelling approaches	2471-2480
Van Bogaert, Philippe	09.16: Edge clamping effect on the fatigue resistance of an orthotropic steel bridge deck	2481-2488
Jungbluth, Dominik / Stranghöner, Natalie	09.17: Fatigue life of marked steel components	2489-2498
Takács, Patrik / Fink, Josef	09.18: Innovative composite deck slab for railway bridges: Analysis of the fatigue behaviour of the shear connectors using the strain-life method	2499-2507
Hanus, Francois / Zaganelli, Dario / Cajot, Louis-Guy / Braun, Matthias	10.01: Analytical methods for the prediction of fire resistance of "reinforced” slim floor beams	2508-2517
Cábová, Kamila / Lišková, Nikola / Benýšek, Martin / Zeman, Filip / Wald, František	10.02: Numerical simulation of fire-resistance test of steel beam	2518-2525
Bihina, Gisèle / Zhao, Bin	10.03: Numerical investigation on the fire behaviour of steel beams with local fire protection damages	2526-2533
Shakil, Saani / Lu, Wei / Puttonen, Jari	10.04: Behaviour of plane frames of high strength steel in fire	2534-2543
Ho, Wing Kei / Huang, Yuner	10.05: Experimental investigation on ferritic stainless steel post-fire mechanical properties	2544-2552
Xu, Lei / Yang, Shijun / Cui, Jia	10.06: Fire performance of CFS walls with web-perforated studs-A numerical investigation	2553-2562
Tondini, Nicola / Demonceau, Jean-François	10.07: Numerical analysis of the fire resistance of high-strength steel circular columns	2563-2571
Espinós, Ana / Albero, Vicente / Romero, Manuel L. / Hospitaler, Antonio / Ibañez, Carmen	10.08: Application of advanced materials for enhancing the fire performance of slim-floors	2572-2581
Maia, Élio / Couto, Carlos / Real, Paulo Vila / Lopes, Nuno	10.09: Critical temperatures of members with class 4 cross-section	2582-2591
Quan, Guan / Huang, Shan-Shan / Burgess, Ian	10.10: Influence of beam-end buckling on adjacent beam-column connections in fire	2592-2600
Bączkiewicz, Jolanta / Malaska, Mikko / Pajunen, Sami / Heinisuo, Markku	10.11: Fire design of rectangular hollow section joints	2601-2609
Dias, Yomal / Keerthan, Poologanathan / Mahendran, Mahen	10.12: Numerical modelling of steel sheathed LSF walls under fire conditions	2610-2619
Leskela, Matti V.	10.13: Bending resistance evaluation of shallow floor beams exposed to fire	2620-2627
Espinós, Ana / Albero, Vicente / Ibañez, Carmen / Romero, Manuel L. / Hospitaler, Antonio	10.14: Fire design method for eccentrically loaded concrete-filled steel tubular columns based on interaction diagrams	2628-2637
Steau, Edward / Keerthan, Poologanathan / Mahendran, Mahen	10.15: Thermal modelling of LSF floor systems made of lipped channel and hollow flange channel section joists	2638-2647
Seif, Mina / Weigand, Jonathan / Peixoto, Rafaela / Vieira, Luiz	10.16: Behaviour of high-strength bolts at elevated temperatures under double-shear loading	2648-2657
Wang, Weiyong / Zhang, Linbo	10.17: Mechanical properties of high strength Q690 steel at elevated temperatures	2658-2667
Winful, Dorothy A. / Cashell, Katherine A. / Afshan, Sheida / Barnes, Adrienne M. / Pargeter, Richard J.	10.18: Material properties of high strength steel under fire conditions	2668-2677
Illia, Tkalenko / Alexey, Tretyakov / František, Wald / Josef, Novak / Radek, Stefan / Alena, Kohoutková	10.19: The steel and fibre-reinforced concrete circular hollow section composite column exposed to fire	2678-2687
Zografopoulou, Kalliopi / Mistakidis, Euripidis	10.20: Numerical simulation of the behaviour of steel members with damaged SFRM fire protection coatings at elevated temperatures	2688-2697
Ibañez, Carmen / Albero, Vicente / Espinós, Ana / Romero, Manuel L. / Hospitaler, Antonio	10.21: Post-fire response of slender concrete-filled steel tubular columns	2698-2707
Camargo, Aline L. / Rodrigues, João Paulo C. / Fakury, Ricardo H. / Lopes, Ruben	10.22: Comparing the fire behaviour of composite columns made with concrete filled double-skin and double-tube steel sections	2708-2715
Correia, António Moura / Rodrigues, João Paulo / Kodur, Venkatesh / Correia, José Pedro	10.23: Parametric study on the fire resistance of steel columns with thermal gradients	2716-2725
Rocha, Fabio M. / Albuquerque, Gabriela L. / Rodrigues, João Paulo C. / Laím, Luís	10.25: Numerical fire tests on the columns of the Cardington steel-framed building	2726-2735
Laím, Luís / Rodrigues, João Paulo C.	10.26: Parametric numerical analysis of cold-formed steel Σ-shaped beams under fire	2736-2745
Reis, André / Lopes, Nuno / Real, Paulo Vila	10.27: Contribution from the flanges to the shear buckling resistance of steel plate girders at normal and elevated temperatures	2746-2755
Wu, Bo / Zang, Jian-bo / Zhang, Qiang	10.28: Fire performance of concrete filled steel tubular columns with built-in stirrups	2756-2764
Both, Ioan / Kyzlik, Petr / Vacha, Jaroslav / Wald, František / Zaharia, Raul	10.29: The thermal response of corrugated web beams subjected to fire	2765-2770
Dolinar, Urška / Ogrin, Anita / Planinc, Igor / Hozjan, Tomaž	10.30: Mechanical response of steel structures in fire: Influence of different material and creep models	2771-2779
Braun, Matthias / Zaganelli, Dario / Hanus, Francois / Obiala, Renata / Cajot, Louis-Guy / Peirce, Anthony	10.31: Simplified analytical determination of the temperature distribution and the load bearing resistance of slim-floor beams	2780-2789
Li, Guo-Qiang / Huang, Lei / Zhang, Chao	10.32: Experimental study on high temperature elastic modulus of China made high strength structural steel	2790-2796
Winful, Dorothy A. / Afshan, Sheida / Cashell, Katherine A. / Barnes, Adrienne M. / Pargeter, Richard J.	10.33: Flexural buckling behaviour of high strength steel columns under fire conditions	2797-2805
Torić, Neno / Brnić, Josip / Boko, Ivica / Čanađija, Marko / Turkalj, Goran / Lanc, Domagoj / Brčić, Marino / Burgess, Ian W. / Harapin, Alen / Divić, Vladimir / Uzelac, Ivana	10.34: Creep properties of grade S275JR steel at high temperature	2806-2810
Maslak, Mariusz / Pazdanowski, Michal / Wozniczka, Piotr	10.35: Influence of joint stiffness on the behaviour of steel bearing frame under fire conditions	2811-2820
Pires, Dalilah / Barros, Rafael Cesário / Lemes, Ígor José Mendes / Rocha, Paulo Anderson Santana / da Mota Silveira, Ricardo Azoubel	10.36: Advanced numerical analysis of steel, concrete and composite structures under fire conditions	2821-2830
Su, Mei-Ni / Young, Ben	10.37: Mechanical properties of high strength aluminium alloy at elevated temperatures	2831-2839
Du, Yong / Liew, J. Y. Richard / Xiong, Ming-Xiang	10.38: Effects of heat-treatment methods on mechanical performance of high-tensile strength steel subject to elevated temperatures	2840-2846
Macillo, Vincenzo / Bucciero, Bianca / Terracciano, Maria Teresa / Pali, Tatiana / Fiorino, Luigi / Landolfo, Raffaele	11.01: Shaking table tests on cold-formed steel building sheathed with gypsum panels	2847-2856
Pali, Tatiana / Bucciero, Bianca / Terracciano, Maria Teresa / Macillo, Vincenzo / Fiorino, Luigi / Landolfo, Raffaele	11.02: In-plane quasi-static cyclic tests on lightweight steel drywall non-structural partition walls	2857-2866
Breton, Nicolas / Tremblay, Robert	11.04: Examination of the Canadian provisions for the seismic stability of steel structures	2867-2876
Imanpour, Ali / Leclerc, Martin / Siguier, Romain / Tremblay, Robert	11.06: Application of hybrid simulation for the evaluation of the buckling response of steel braced frame columns	2877-2886
Chisari, Corrado / Francavilla, Antonella B. / Latour, Massimo / Piluso, Vincenzo / Rizzano, Gianvittorio / Amadio, Claudio	11.08: Reliable calibration of cyclic models for steel members	2887-2896
Castaldo, Paolo / Nastri, Elide / Piluso, Vincenzo / Pisapia, Alessandro	11.09: Validation of probabilistic theory of plastic mechanism control by means of Monte Carlo simulations	2897-2905
Castaldo, Paolo / Nastri, Elide / Piluso, Vincenzo / Pisapia, Alessandro	11.10: Probabilistic theory of plastic mechanism control	2906-2915
Dimopoulos, Christoforos A. / Freddi, Fabio / Karavasilis, Theodore	11.11: Rocking damage-free steel column base with friction devices: Development of advanced 3D finite element models in Abaqus	2916-2925
Augusto, Hugo / Castro, José Miguel / Rebelo, Carlos / da Silva, Luís Simões	11.12: Derivation of the cyclic behaviour of components in bolted end-plate beam-to-column joints using FEM	2926-2935
Vulcu, Cristian / Dubina, Dan / Popa, Nicolae / Vekas, Ladislau / Ghiţă, Gheorghe / Sireteanu, Tudor / Borbath, Istvan / Oprescu, Radu	11.13: Hybrid seismic protection system: Buckling restrained brace of nano-micro composite magneto rheological damper	2936-2945
Ke, Ke / Chen, Yiyi / Yam, Michael C. H.	11.14: Seismic performance of high-strength-steel frame with buckling hinge beams in energy dissipation bays	2946-2955
Cedrón, Francisco / Elghazouli, Ahmed Y.	11.15: Seismic behaviour of single layer cylindrical lattice steel shells	2956-2965
Yan-wen, Li / Guo-qiang, Li / Fei-fei, Sun	11.16: Seismic performance evaluation of MRFS with dissipative continuous columns	2966-2974
Barbagallo, Francesca / Bosco, Melina / Marino, Edoardo M. / Rossi, Pier Paolo	11.17: Seismic retrofitting of concentrically braced frames by rocking walls and viscous dampers	2975-2984
Zona, Alessandro / Leoni, Graziano / Dall'Asta, Andrea	11.18: Seismic analysis of innovative hybrid steel concrete coupled walls	2985-2992
Hazay, Máté / Gergely Vigh, László	11.19: Seismic fragility assessment of steel frames: Application of advanced reliability analysis	2993-3002
Baiguera, Marco / Vasdravellis, George / Karavasilis, Theodore L.	11.21: Experimental evaluation and explicit fracture simulations of stainless steel seismic dampers	3003-3012
Bosco, Melina / Ghersi, Aurelio / Marino, Edoardo M. / Rossi, Pier Paolo	11.23: Influence of the uniaxial material model of steel on the seismic response of steel structures	3013-3022
Curkovic, Ivan / Skejic, Davor / Dzeba, Ivica	11.24: Impact of column flexural stiffness on behaviour of steel plate shear walls	3023-3032
Freddi, Fabio / Dimopoulos, Christoforos A. / Karavasilis, Theodore L.	11.25: Rocking damage-free steel column base with friction devices: Design procedure and global seismic response of buildings	3033-3042
Vlad, Ion / Vlad, Mirela Nausica	11.26: The seismic design of a building having a dual type structural system in Romania	3043-3052
Zhu, Bo-Li / Guo, Yan-Lin	11.27: Elastic buckling load and load resistance of core-separated assembled BRB confined by two concrete-infilled tubes	3053-3061
Della Corte, Gaetano / Cantisani, Gaetano / Landolfo, Raffaele	11.28: Seismic response of built-up steel columns with semi-continuous base-plate connections: Experimental results vs. theoretical predictions	3062-3071
Hartloper, Alexander / Lignos, Dimitrios	11.29: Updates to the ASCE-41-13 provisions for the nonlinear modeling of steel wide-flange columns for performance-based earthquake engineering	3072-3081
Santiago, A. / Simões da Silva, L. / da Silva, L. C. Fernandes / Cavallaro G., Ferrante / Francavilla, A. / Latour, M. / Piluso, V. / Rizzano, G.	11.30: Experimental behaviour of base plate joints equipped with self-centering system and friction dampers	3082-3091
Bonchev, Georgi / Belev, Borislav / Mualla, Imad	11.32: Linked columns with friction dampers as a technique for seismic retrofit of steel moment resisting frames	3092-3099
Das, Rajarshi / Zona, Alessandro / Vandoren, Bram / Degée, Hervé	11.33: Performance evaluation of an innovative HCW system with Shear Dissipative Links	3100-3108
Shaheen, Mahmoud S. A. / Rasmussen, Kim J. R.	11.34: Cross-aisle seismic behaviour of drive-in rack systems	3109-3118
Faggiano, Beatrice / Formisano, Antonio / Vaiano, Generoso / Landolfo, Raffaele / Mazzolani, Federico Massimo	11.35: Numerical study on steel braces under reversed cyclic loads	3119-3128
Ghowsi, Ahmad Fayeq / Sahoo, Dipti Ranjan	11.36: Influence of type of loading protocols and restraining parameters on cyclic response of steel BRB	3129-3138
Wu, An-Chien / Tsai, Keh-Chyuan	11.37: Hybrid tests of a full-scale two-story buckling-restrained braced RC frame	3139-3147
Yang, T. Y. / Sargazi, Omid / Tobber, Lisa	11.38: Investigation of innovative steel concentrically braced frame connections using advanced analytical models	3148-3155
Dib, Abdelkarim / Gergely Vigh, László	11.40: Cyclic bending of multi-stiffened plate girders: Numerical model development and analysis	3156-3164
Moammer, Omid / Deylami, Ardeshir. / Jafari, Khashayar / Raisszadeh, Amir Hossein	11.41: Numerical investigation of influence of plate yield point on performance of steel plate shear wall	3165-3172
Both, Ioan / Zub, Ciprian / Stratan, Aurel / Dubina, Dan	11.42: Cyclic behaviour of European carbon steels	3173-3180
Verma, Abhishek / Sahoo, Dipti Ranjan	11.43: Seismic performance of staggered steel plate shear wall systems in high rise buildings	3181-3189
Ryan, Terence / Broderick, Brian / Salawdeh, Suhaib / Hickey, John	11.44: An integrated experimental and numerical assessment of force-based design for concentrically braced steel frames	3190-3199
Pandikkadavath, Muhmaed Safeer / Sahoo, Dipti Ranjan	11.45: Cyclic testing on hybrid buckling-restrained Braces (HBRBs)	3200-3208
Bosco, Melina / Ghersi, Aurelio / Quaceci, Giuseppe / Rossi, Pier Paolo	11.46: The design of suspended zipper braced frames in the framework of Eurocode 8	3209-3218
Bozkurt, Mehmet Bakır / Topkaya, Cem	11.48: An experimental study on welded overlap core: Steel encased buckling-restrained braces	3219-3228
Hickey, John / Broderick, Brian	11.49: Lifetime seismic performance assessment of steel frame structures	3229-3238
Atasever, Kurtulus / Celik, Oguz C. / Yuksel, Ercan	11.50: Modelling hysteretic behaviour of U-shaped steel dampers	3239-3248
Bulić, Mladen / Čaušević, Mehmed	11.51: Numerical investigation of short seismic links in shear	3249-3258
Suzuki, Atsushi / Kimura, Yoshihiro / Kasai, Kazuhiko	11.52: Local buckling behavior and plastic deformation capacity of H-shaped beams under reversed axial forces	3259-3268
Köber, Helmuth / Stoian, Marina	11.53: Reduced cross-sections in seismic resistant steel structures	3269-3276
Köber, Helmuth / Stoian, Marina	11.54: A proposal to improve the seismic behaviour of eccentrically braced structures	3277-3284
Ntina, Maria / Sophianopoulos, Dimitrios / Tsopelas, Panos	11.55: Development of a 2-dof model simulating the dynamic response of special truss moment frames with shape memory alloy bars as dissipation devices in the special segment	3285-3294
Shaheen, Mahmoud S. A. / Rasmussen, Kim J. R.	11.56: Test rig for seismic experiments of drive-in racks	3295-3304
Martin, Pierre-Olivier / Rodier, Anthony / Couchaux, Maël / Kanyilmaz, Alper / Degée, Hervé	11.57: Assessment of the ductile behaviour of CBF structures considering energy dissipation in bolted joints	3305-3314
Lin, Xuchuan / Hu, Yangyang / Okazaki, Taichiro	11.59: Study on highly elastic seismic structural system based on very-high strength steel and damage-control fuses	3315-3320
Titirla, Magdalini D. / Katakalos, Konstantinos V. / Papadopoulos, Panikos K.	11.60: Experimental investigation under cyclic loadings of an innovative passive mitigation device	3321-3328
Penelov, Chavdar / Hadzhiyaneva, Irena / Belev, Borislav	11.62: A numerical study on the seismic performance of experimentally-tested steel single-storey concentrically braced frames	3329-3335
Henriques, José / Morelli, Francesco / Salvatore, Walter / Degée, Hervé	11.63: Seismic protection of gas tanks	3336-3345
Faggiano, Beatrice / Formisano, Antonio / Castaldo, Carmine / Canicattì, Luca / Landolfo, Raffaele / Mazzolani, Federico Massimo	11.64: Seismic behaviour of steel Chevron bracing systems by non-linear dynamic analyses	3346-3355
Li, Ran / Shu, Ganping / Liu, Zhen / Lyu, Xiao / Chen, Meihe	11.65: An axial type self-centering energy dissipation device with shape memory alloy for seismic mitigation	3356-3364
Ozkula, Gulen / Harris, John / Uang, Chia-Ming	11.67: Cyclic backbone curves for steel wide-flange columns: A numerical study	3365-3374
Arrayago, Itsaso / Real, Esther / Mirambell, Enrique / Chacón, Rolando	12.01: Global plastic design of stainless steel frames	3463-3471
Pi, Yong-Lin / Bradford, Mark Andrew / Liu, Airong	12.02: High strength steel I-section arches: Inelastic lateral buckling and moment capacity	3472-3480
Afshan, Sheida / Zhao, Ou / Gardner, Leroy	12.03: Buckling curves for stainless steel tubular columns	3481-3490
Ma, Tian-Yu / Li, Guo-Qiang / Chung, Kwok-Fai	12.04: Experimental and numerical investigation on the Q690 high strength steel slender columns of welded H-sections under compression	3491-3500
Zhou, Xiong / Kang, Shao-Bo / Yang, Bo / Nie, Shi-Dong	12.05: Global buckling behaviour of welded Q460GJ steel box columns: Experimental study and numerical simulations	3501-3508
de Araújo, Raphaella Oliveira / de Lima, Luciano Rodrigues Ornelas / da Silva Vellasco, Pedro Colmar Gonçalves / da Silva, André Tenchini	12.06: Numerical analysis of stainless steel, concrete encased and carbon steel double skin tubular stub columns	3509-3518
Ribeiro, Danielle M. / da S. Vellasco, Pedro C. G. / de Araujo, Ricardo R. / de Lima, Luciano R. O. / da Silva, André T.	12.07: Numerical assessment of stayed austenitic steel columns	3519-3526
Liang, Yating / Zhao, Ou / Long, Yue-Ling / Gardner, Leroy	12.08: Cross-section stability of stainless steel channel sections subjected to combined loading	3527-3536
Holmstrøm, Peter / Nielsen, Mogens G. / Cero, Dritan	12.09: Weathering steel - 30 years of experience in Banedanmark	3537-3546
Gkantou, Michaela / Theofanous, Marios / Baniotopoulos, Charalampos	12.10: Structural response of high strength steel hollow sections under combined biaxial bending and compression	3547-3556
Suwen, CHEN / Xing, CHEN / Yan-Bo, WANG / Zhili, LU / Guo-qiang, Li	12.11: Experimental and numerical studies on Q690D welded Box-section columns under cyclic loading	3557-3566
Chen, Cheng / Zhao, Ming-Shan / Fung, Tat-Ching / Chiew, Sing-Ping / Lee, Chi-King	12.12: Influence of welding on mechanical properties of high strength steel butt joints	3567-3576
Sadowski, Adam J. / Rotter, J. Michael / Ummenhofer, Thomas	12.13: On recent characterisations of the post-yield properties of structural carbon steels	3577-3583
Kokosis, Georgios / Gkantou, Michaela / Theofanous, Marios / Dirar, Samir	12.14: Ultimate response and design of stainless steel continuous beams	3584-3592
Freire, Raphael / da Silva Vellasco, Pedro Colmar Gonçalves / da Silva, André Tenchini / de Lima, Luciano Rodrigues Ornelas	12.15: Structural performance of stainless lap bolted joints	3593-3602
Toffolon, Andrea / Taras, Andreas	12.16: Numerical investigation of the local buckling behaviour of high strength steel circular hollow sections	3603-3612
Mela, Kristo / Tiainen, Teemu / Heinisuo, Markku	12.17: Economical design of high strength steel trusses using multi-criteria optimization	3613-3621
Ma, Jia-Lin / Chan, Tak-Ming / Young, Ben	12.18: Experimental investigation on cold-formed high strength steel circular hollow sections under combined compression and bending	3622-3630
Zhu, Qian / Nie, Shidong / Yang, Bo / Xiong, Gang / Dai, Guoxin	12.19: Experimental investigation on residual stresses in welded thick-walled I-shaped sections fabricated from Q460GJ structural steel plates	3631-3640
Marik, Jan / Jandera, Michal	12.20: Mechanical properties of cold-formed stainless steel	3641-3650
Chacón, Rolando / Arrayago, Itsaso / Mirambell, Enrique / Real, Esther	12.21: Cyclic loading in stainless steel links under lateral loads	3651-3660
Javidan, Fatemeh / Heidarpour, Amin / Zhao, Xiao-Ling / Al-Mahaidi, Riadh	12.22: Seismic performance of high capacity hybrid beam-columns: Comprising of high strength steel tubes subjected to lateral cyclic loading	3661-3670
Shi, Gang / Wang, Xun / Zhang, Yong	12.23: Research on low-yield-point steels in Tsinghua University	3671-3678
Snijder, H. H. / Dekker, R. W. A. / Teeuwen, P. A.	13.01: Net cross-section failure of steel plates at bolt holes: Numerical work and statistical assessment of design rules	3679-3688
da Silva, Luís Simões / Tankova, Trayana / Marques, Liliana / Kuhlmann, Ulrike / Kleiner, Andreas / Spiegler, Jennifer / Snijder, H. H. / Dekker, Rianne / Taras, Andreas / Popa, Nicoleta	13.02: Safety assessment across modes driven by plasticity, stability and fracture	3689-3698
Dekker, R. W. A. Rianne / Snijder, H. H. Bert / Maljaars, J. Johan	13.03: Bending-shear interaction of steel I-shaped cross-sections: Statistical investigation	3699-3708
Banfi, Mike	13.04: The next generation of Eurocode 4	3709-3718
Biegus, Antoni / Czepiżak, Dariusz	13.05: Imperfection force of members under longitudinal action having a variable sign	3719-3728
Peters, Dirk Jan / Sadowski, Adam / Rotter, J. Michael / Taras, Andreas	13.06: Calibration of Eurocode design models of thin-walled cylinder under bending with full scale tests	3729-3740
Wallin, Kim / Karjalainen-Roikonen, Päivi / Suikkanen, Pasi	13.07: Extension of EN 1993-1-10 and EN 1993-1-12: To higher strengths and thinner sections	3741-3750
Beyer, André / Khelil, Abdelouahab / Boissonnade, Nicolas / Bureau, Alain	13.08: Plastic resistance of U sections under major-axis bending, shear force and bi-moments	3751-3760
Stan, Tudor-Cristian / Jönsson, Jeppe	13.09: Yield stress independent column buckling curves	3761-3770
Može, Primož	13.10: Angles connected by one leg in tension	3771-3780
Dinis, Pedro Borges / Camotim, Dinar / Vieira, Luís	13.11: DSM design approach for hot-rolled steel angle columns	3781-3790
Balaz, I. / Koleková, Y.	13.12: Resistances of I- and U-sections: Combined bending and torsion internal forces	3791-3800
Macedo, Luís / Castro, José Miguel	13.13: Earthquake loss assessment of steel moment-resisting frames designed according to EC8	3801-3810
Araújo, Miguel / Macedo, Luís / Castro, José Miguel	13.14: Seismic assessment and strengthening of existing steel moment-resisting frame buildings: the European EC8-3 and current challenges	3811-3820
Loulelis, Dimitris G. / Papagiannopoulos, George A. / Beskos, Dimitri E.	13.15: Seismic design of steel moment resisting frames: Modal strength reduction factors including strength deterioration and panel zone effects	3821-3830
Annan, Rachid / Bechtold, Martin / Friedrich, Heinz / Kemmler, Roman / Misiek, Thomas / Numminen, Veikko / Ruff, Daniel C.	13.16: Design of tension components: Revision and further development of EN 1993-1-11	3831-3840
da S. Vellasco, Pedro C. G. / de Lima, Luciano R. O. / da Silva, Luís Simões / Simões, Rui / Gervásio, Helena	13.17: A comprehensive assessment of eurocode 3 pt. 1.1 & NBR 8800 steel design codes	3841-3850
Giżejowski, Marian Antoni / Barszcz, Anna Maria	13.18: Advanced analysis of braced steel frames: Modelling accounting for the post-limit behaviour of compressed angle braces	3851-3860
Francavilla, Antonella B. / Latour, Massimo / Rizzano, Gianvittorio / Demonceau, Jean-François / Jaspart, Jean-Pierre	14.01: Influence of beam-to-column joints on the robustness of earthquake-resistant moment-resistant frames	3861-3870
Partov, Doncho / Petkov, Milen / Matuski, Vladimir / Zhelev, Dimo	14.04: Temporary steel structures: for strengthening of a large excavation for new metro in Sofia	3871-3880
Fu, Qiu Ni / Tan, Kang Hai / Yang, Bo	14.05: A mehcanical model of composite floor systems under internal column-removal scenarios	3881-3889
Demonceau, Jean-François / Vanvinckenroye, Hélène / D'Antimo, Marina / Denoël, Vincent / Jaspart, Jean-Pierre	14.06: Beam-to-column joints, column bases and joint components under impact loading	3890-3899
Bai, Rui / Liu, Si-Wei / Chan, Siu-Lai	15.02: Direct analysis of steel frames with non-prismatic sections via tapered beam-column elements	3900-3909
Wang, Hao / Tan, Kang Hai / Yang, Bo / Peng, Jing	15.04: Parametric study on steel beams with fin-plate joints under falling floor impact	3910-3919
Sano, Tatsuhiko / Ikarashi, Kikuo / Ohnishi, Yuki / Shirai, Daigo	15.05: The experiment of H-shaped beams with continuous restraint on upper flange	3920-3929
Liu, Yao-Peng / Chan, Siu-Lai / Du, Zuo-Lei / He, Jian-Wei	15.07: Second-order direct analysis of long-span roof structures	3930-3939
Bravo-Haro, M. / Tsitos, A. / Elghazouli, A. Y.	15.08: Influence of deterioration modelling on local deformation demands in steel moment frames	3940-3949
Surampudi, Bala A. V. / Butler, Martin A. / Swanson, James A. / Rassati, Gian Andrea	15.09: High-resolution modelling and design of steel structures	3950-3959
Karlos, Vasilis / Solomos, George / Larcher, Martin	15.10: Probabilistic analysis of steel columns under blast induced loads	3960-3969
Hamel, Scott / Peterman, Kara	15.11: Lab testing and modelling of thermal break assemblies: Mitigating structural penetrations in building envelopes	3970-3979
Lotfollahi, Mehrdad / Alinia, Mohamad Mehdi / Taciroglu, Ertugrul	15.12: On imperfection-sensitivity evaluation of BMRF systems: Buckling and post-buckling responses	3980-3989
Van Mellaert, Roxane / Mela, Kristo / Tiainen, Teemu / Heinisuo, Markku / Lombaert, Geert / Schevenels, Mattias	15.13: Discrete sizing optimization of trussed steel portal frames according to Eurocode 3	3990-3999
Campista, Fernanda Fernandes / da Silva, José Guilherme Santos	15.15: Dynamic Analysis of Steel-Concrete Composite Building Floors Subjected to Human Rhythmic Activities	4000-4009
da Silva, José Guilherme Santos / Barboza, Rafael Rangel	15.16: Vibration Analysis and Human Comfort Investigation of a Steel-Concrete Composite Building under Nondeterministic Wind Loadings	4010-4019
Goli-Oglu, Yevgen / Greisen, Zibrandt	15.17: Progress in the development of production of heavy plates. S355-S460ML till 100 mm at NLMK DanSteel	4020-4028
Sørensen, Jesper	16.01: Bjørnafjorden suspension bridge TLP concept	4029-4038
Gens, Frédéric / Servais, Vincent	16.02: "La Belle Liégeoise”, the new footbridge in Liège	4039-4048
Kövesdi, Balázs / Dunai, Péter / Dunai, László	16.03: Structural analysis of the historical Széchenyi: chain bridge in Budapest	4049-4058
Oliveira Pedro, José J. / Reis, Antonio J. / Baptista, Claudio	16.04: High strength steel (HSS) S690 in highway bridges: Comparative design	4059-4068
Brandstetter, Georg / Schobesberger, Felix / Fink, Josef	16.05: Evaluation of simplified models for short span bridges: Based on a measured train crossing and included substructure	4069-4078
Maiorana, Emanuele / Sartori, Lorenzo / Lazzari, Massimiliano / Pellizzer, Luca	16.06: Realization and launching of the Adda-Bitto Viaduct in Italy	4079-4087
Jáger, Bence / Kövesdi, Balázs / Dunai, László	16.07: Flange buckling resistance of trapezoidal web girders: Experimental and numerical study	4088-4097
de Ville de Goyet, Vincent / Duchêne, Yves / Propson, Arnaud	16.08: The dynamic behaviour of the third Bosporus Bridge	4098-4107
De Backer, Hans / Outtier, Amelie / Van Puymbroeck, Evy / Van Bogaert, Philippe	16.09: Influence of arch bridge skewness	4108-4112
Jensen, Jakob Laigaard / Lambertsen, Jens / Zinck, Morten / Stefansson, Einar	16.10: Challenges with water ingress in bridge cable systems	4113-4122
Breunig, Stephanie / Kuhlmann, Ulrike	16.11: Experimental tests on the fatigue behaviour of thick-plate trough railway bridges	4123-4132
Stroscio, Riccardo	16.12: Winning steel solution for flat arch bridge	4133-4142
Kaern, Jens Christian / Hansen, John Elnegaard	16.13: Queensferry crossing cable-stayed composite bridge	4143-4152
Zinke, Tim / Ummenhofer, Thomas / Lenz, Katrin / Schneider, Sarah / Beck, Tabea	16.14: Operational, ecological and economical assessment of steel railway bridges	4153-4162
Suwaed, Ahmed S. H. / Karavasilis, Theodore L.	16.15: Experimental evaluation of a novel demountable shear connector for accelerated repair or replacement of precast steel-concrete composite bridges	4163-4172
Stroscio, Riccardo	16.16: Medium span steel-concrete composite bridges: plate girders or box girders	4173-4182
Nishioka, Bungo / Imagawa, Yusuke / Ohyama, Osamu	16.17: N-M-Q interaction of cross sections in steel-concrete double composite girder bridges	4183-4191
Gawlista, Jannik / Kasper, Marcel / Schraml, Marcus / Brand, Werner	16.18: DYNA® link anchor box: Innovative structure for anchoring stay cables	4192-4198
Loaiza, Nelson / Graciano, Carlos / Chacón, Rolando / Casanova, Euro	16.20: Influence of bearing length on the patch loading resistance of multiple longitudinally stiffened webs	4199-4204
Bujnak, Jan / Gocála, Jozef / Hlinka, Richard	16.21: Evaluation of existing railway bridges	4205-4212
Hołowaty, Janusz / Wichtowski, Bernard	16.22: Remarks on the material testing of historical railway bridges: Steelworks built from 1873 to 1950	4213-4222
Loaiza, Nelson / Graciano, Carlos / Chacón, Rolando / Casanova, Euro	16.23: A comparative analysis of longitudinal stiffener cross-section for slender I-girders subjected to patch loading	4223-4229
Yamaguchi, Eiki / Tsuji, Hiroyuki / Tanaka, Yukito	16.24: Load-carrying capacity of steel girder damaged by collision	4230-4235
Ungermann, Dieter / Holtkamp, Svenja / Feldmann, Markus / Kühne, Ronny / Rademacher, Dennis	16.25: Hot-dip galvanized composite dowel strips in bridge construction: The combination of two advantageous developments	4236-4245
Marcussen, Jens Brolev	16.26: Design and construction of composite bridges	4246-4255
Molinaro, Carmine / Sorge, Roberto / Fiscina, Gennaro	16.27: Fabrication activities and quality aspects of the Third Bosphorus Bridge orthotropic steel deck	4256-4265
Thomsen, Kjeld / Petersen, Christian Riis	16.28: High speed railway bridge - Copenhagen and Ringsted - TP 30: The longest composite railway girder bridge in Denmark	4266-4275
Van Puymbroeck, Evy / Nagy, Wim / Schotte, Ken / Ul-Abdin, Zain / De Backer, Hans	16.29: Determination of the residual stress distribution of steel bridge components by modelling the welding process	4276-4282
Liu, Yushu / Lou, Guobiao / Ju, Xiaochen / Liu, Xiaoguang	16.30: Safety evaluation of a large-span double-deck cable-stayed steel bridge under fire	4283-4292
Karamichalis, Nikolaos / Benfield, Simon / Rafiu, Hussain	16.31: Use of API specified steel tubes for infrastructure applications in Europe	4293-4302
Sørensen, Paw Lee / Sørensen, Ove / Linneberg, Poul	17.02: Strengthening of oil platform with submerged cables: Strengthening of offshore oil production platform with prefabricated submerged cables	4303-4312
Maheri, Mahmoud R. / Karbaschi, M. E.	17.03: Dynamic properties of unanchored circular ground-based steel tanks	4313-4322
Augustyn, Dawid / Nielsen, Martin Bjerre / Pedersen, Ronnie Refstrup	17.04: Design of offshore wind turbine jacket foundations: On the influence of subsequent modifications on fatigue performance	4323-4332
Clausen, Henrik Bisgaard / Pedersen, Ronnie Refstrup	17.05: Advanced framework for suction bucket jacket design	4333-4340
Čekerevac, Damjan / Rigueiro, Constança / Pereira, Eduardo	17.06: Characterization of accidental scenarios for offshore structures	4341-4350
Christensen, Rasmus Magdal / Nielsen, Mogens Gunhard / Støttrup-Andersen, Ulrik	18.01: Effective Vibration Dampers: Mast, towers and chimneys	4351-4360
Støttrup-Andersen, Ulrik / Nielsen, Mogens Gunhard / Laursen, Thomas Brink	18.02: Optimisation of masts and towers	4361-4370
Ciliz, Serap / Tunc, Bahadir / Guler, Saziye Gulden	18.03: Comparative analysis of steel telecommunication tower: By using V shaped & L shaped hot rolled steel profiles under design & fabrication stage	4371-4379
Spiliopoulos, Andreas / Dasiou, Maria-Eleni / Vayas, Ioannis	18.04: Experimental investigations of members from angle sections	4380-4389
Alhalaby, Mahmoud / Wang, Yong	18.05: Second-order effects of cantilever concrete filled double skin tube (CFDST) transmission towers	4390-4399
Mohammadi, Mohammad Reza Shah / Farhan, Muhammad / Rebelo, Carlos / Veljkovic, Milan	18.06: Preliminary transition piece design for an onshore wind turbine	4400-4409
Krausche, Thomas / Launert, Benjamin / Pasternak, Hartmut	19.01: A study on the prediction of welding effects in steel box girders	4410-4416
Faiella, Diana / Viscovo, Simona / Mele, Elena	19.02: Exploring the potentials of metal foams in structural elements for civil/building applications	4417-4426
Nordestgaard, Peter Madsen / Højgaard Arndt, Casper / Rizvan, Patrik / Husbjerg, Jens	19.03: Amager bakke: Design challenges for a steel building with a recreational roof	4427-4436
Mele, Elena	19.04: Diagrid: the renaissance of steel structures for tall buildings geometry, design, behavior	4437-4446
Okutu, Kwesi / Davison, Buick / Carr, Jon	19.05: CLT-steel composite slimfloor construction: An investigation of mechanical behaviour using finite element software	4447-4456
Nordestgaard, Peter Madsen / Wyrtz, Mikkel / Tinning, Henrik	19.06: The Blue Planet: A simple building concept for spectacular geometry	4457-4466
de Ville de Goyet, Vincent / Duchêne, Yves / Gens, Frédéric / Seret, Sébastien	19.07: The steel roof of the new Lille Stadium: Its mechanical scheme, its assembly and erection sequences	4467-4476
Vanggaard, Ole / Weidemann, Hans Chr. / Nordestgaard, Peter Madsen	19.08: College of Falkonergården, Frederiksberg, Denmark: Structural and architecturally innovative multifunctional steel hall	4477-4485
Simoni, Thomas / Nordestgaard, Peter Madsen	19.10: Hyperbolic paraboloid shape shell structure: As roof for an outdoor music stage	4486-4491
Ichinose, Luiza Hiroko / Koyama, Masahiro / Sakano, Masahiro	21.01: Fatigue prevention retrofit for connections of main girder to transverse beam or sway bracing in steel bridges	4492-4501
Unterweger, Harald / Novak, Friedrich	21.02: Strengthening of orthotropic steel decks using UHPC: UHPC-concrete instead of asphalt layer for additional at least 50 years in service	4502-4511
Hradil, Petr / Talja, Asko / Ungureanu, Viorel / Koukkari, Heli / Fülöp, Ludovic	21.03: Reusability indicator for steel-framed buildings and application for an industrial hall	4512-4521
Manolache, Laura / Wang, Yudong / Tirca, Lucia / Bagchi, Ashutosh	21.04: Vibration characteristics of an existing high-rise building in Montreal and the effects of retrofit	4522-4531
Siwowska, Paulina / Siwowski, Tomasz	21.05: Strength evaluation of steel beams prestressed with CFRP plates	4532-4541
Reyes, Juan C. / Yamin, Luis E. / Gonzalez, Cristian D. / Sandoval, Juan David	21.06: Seismic retrofit of historical earthen buildings using steel	4542-4549
Pap, Zsuzsa B. / Horváth, László. / Kövesdi, Balázs	21.07: Refurbishment of the historical Eiffel-hall in Budapest	4550-4559
Fox, Christian / Doktor, Dipl.-Math. Markus / Kurz, Wolfgang / Seiler, Georg / Wu, Haoran / Boller, Christian	21.08: Evaluation of steel buildings by means of non-destructive testing methods	4560-4569
Mizokami, Yoshiaki / Kamata, Masafumi / Kishi, Yuki / Sakano, Masahiro	21.09: A study on repair method using TRS for fatigue cracks in orthotropic steel deck	4570-4578
Hołowaty, Janusz	21.10: Upgrading of a riveted railway bridge: Retrofitting of corroded plate girder steelwork	4579-4586
Van Bogaert, Philippe	21.11: Asymmetrical cross sections in historic riveted bridges	4587-4594
Selvaraj, Sivaganesh / Madhavan, Mahendrakumar / Gopalan, Anadh Gopal Venu / Jayabalan, Aswin Kumar / Arumugam, Pavan Kumar	21.12: Behaviour of CFS strengthened hot-rolled structural steel beams under flexure	4595-4604
Sakamoto, Chihiro / Sakano, Masahiro / Konishi, Hideyuki / Koyama, Masahiro	21.13: Experimental study on retrofitting method against fatigue cracking at the upper end of vertical stiffeners	4605-4613
Hauke, Bernhard / Kuhnhenne, Markus / Kreissig, Johannes	21.14: Life cycle analysis of steel structures: Why the recycling potential must be considered	4614-4619
Gervásio, Helena / Dimova, Silvia / Pinto, Artur	21.15: Resource efficiency in the building sector: Application to steel buildings	4620-4629
Siebers, Raban / Hauke, Bernhard / Helmus, Manfred / Meins-Becker, Anica	21.16: Sustainability considerations for the construction phase of steel structures	4630-4639
de Silva, Donatella / Nuzzo, Iolanda / Bilotta, Antonio / Losanno, Daniele / Nigro, Emidio / Serino, Giorgio	22.01: Fire and seismic assessment of an existing steel-concrete composite structure	4640-4649
Aanhaanen, Jaap	22.02: The music square canopy: An outdoor stage for Amager Kulturpunkt	4650-4659
Karlsson, Stefan / Eidet, Espen / Holmstrøm, Peter / Kaern, Jens Christian	22.03: Acoustic ceiling designed for trains passing at 250km/h: Holmestrand - The first station in the world inside a mountain entrance hall	4660-4669
Gludsted, Martin / Nielsen, Mogens G. / Skouboe, Henrik / Steenholt-Eliasson, Karl Emil	22.04: New design for transmission line towers in Denmark	4670-4679
Vayas, Ioannis / Vamvatsikos, Dimitrios / Thanopoulos, Pavlos	I.11.00: Innovative systems for seismic resistance: The INNOSEIS Project	3375-3384
Georgiev, Tzvetan / Raycheva, Lora	I.11.03: Influence of splitting beam and column stiffness on CBFS ductile behaviour	3385-3394
Zimbru, Mariana / D'Aniello, Mario / Stratan, Aurel / Landolfo, Raffaele / Dubina, Dan	I.11.05: Parametric finite element analyses of detachable short links	3395-3403
Zub, Ciprian Ionut / Dogariu, Adrian / Stratan, Aurel / Dubina, Dan	I.11.07: Pre-test numerical simulations for development of prequalified buckling restrained braces	3404-3413
Dubina, Dan / Stratan, Aurel / Chesoan, Adriana	I.11.20: Design recommendations for dual moment - eccentric braced frames with replaceable links	3414-3423
Alavi, Amin / Castiglioni, Carlo Andrea / Brambilla, Giovanni	I.11.39: Behaviour factor evaluation of moment resisting frames having dissipative elements	3424-3433
Vamvatsikos, Dimitrios / Castiglioni, Carlo / Bakalis, Konstantinos / Calado, Luís / D'Aniello, Mario / Degée, Hervé / Hoffmeister, Benno / Pinkawa, Marius / Proenca, Jorge Miguel / Kanyilmaz, Alper / Morelli, Francesco / Stratan, Aurel / Vayas, Ioannis	I.11.47: A risk-consistent approach to determine behavior factors for innovative steel lateral load resisting systems	3434-3443
Avgerinou, Stella / Lignos, Xenofon / Thanopoulos, Pavlos / Vayas, Ioannis	I.11.61: Full scale tests on moment-resistant-frames under cyclic loading	3444-3453
Kanyilmaz, A. / Castiglioni, C. A. / Degee, H.	I.11.68: Seismic behaviour of concentrically braced frames in the moderate seismicity context	3454-3462
Campian, Cristina / Pop, Maria / Chira, Nicolae	P03.01: The influence of the connections between concrete and steel on the joints modelling	4680-4687
Dolejš, Jakub / Pošta, Radek	P04.01: Failures of stiffened ducts stressed by temperature	4688-4697
Dolejš, Jakub / Ilčík, Jiří	P05.01: Simulation of the spatial behaviour of tubular façade scaffolding	4698-4703
Bajer, Miroslav / Barnat, Jan / Vild, Martin / Melcher, Jindrich / Karmazínová, Marcela / Piják, Jiri	P05.02: Different cross-section in lateral-torsional buckling	4704-4711
Dobrić, Jelena / Spremic, Milan / Marković, Zlatko / Ninić, Bojana / Milovanović, Jovana	P10.01: Comparative numerical buckling analysis: Of compressed carbon and stainless steel members at elevated temperatures	4712-4721
Ferraioli, Massimiliano / Lavino, Angelo / Mandara, Alberto	P11.01: A multi-mode pushover analysis procedure to estimate seismic demands for steel moment-resisting frames	4722-4731
Mitsui, Kazuya / Sato, Atsushi / Latour, Massimo / Piluso, Vincenzo / Rizzano, Gianvittorio	P11.02: Experimental analysis and FE modeling of square hollow sections under combined axial and bending loads	4732-4739
Gogny, Eric / Jakobsen, Svein Erik / Mhamed, Aymen Cheikh	P16.01: Brief survey of the Chacao bridge girder design	4740-4749
Visser, Wouter / Amico, Fabio / Torsing, Rob / Top, Reinald / Oosterman, Kay / Bhattacharya, Anurag / Bijlaard, Frans S. K. / Yip, Christine	P16.02: Sognefjord buoyancy bridge: Feasibility and sensitivity analysis	4750-4759

Informations
sur cette fiche
IssueID
15997
Publié(e) le:
24.10.2018
Modifié(e) le:
24.10.2018

Publicité

ce/papers - v. 1, n. 2-3 (septembre 2017)

Articles dans ce numéro

Données obligatoires