Case Studies in Construction Materials - décembre 2021

Publié:	décembre 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Jayalath, Amitha / Navaratnam, Satheeskumar / Gunawardena, Tharaka / Mendis, Priyan / Aye, Lu	Airborne and impact sound performance of modern lightweight timber buildings in the Australian construction industry	e00632
Fanijo, Ebenezer O. / Kolawole, John Temitope / Almakrab, Abdullah	Alkali-silica reaction (ASR) in concrete structures: Mechanisms, effects and evaluation test methods adopted in the United States	e00563
Zhang, Juntao / Zhang, Guangli / Sun, Xinjian / Pan, Wenguo / Huang, Peijie / Li, Zhanhai / Zhang, Baoyun / Zhou, Xinjie	Analysis of compressive dynamic behaviors of plain concrete and lightweight aggregate concrete	e00557
Arıcı, Erdinç / Çelik, Emrah / Keleştemur, Oğuzhan	An analysis of the engineering properties of mortars containing corn cob ash and polypropylene fiber using the Taguchi and Taguchi-based Grey Relational Analysis methods	e00652
Bensalem, Hadjira / Djaknoun, Samira / Ouedraogo, Evariste / Amrouche, Ramdane	Analysis of thermal-induced spalling tests on high to ultra-high performance concrete subjected to standard fire	e00704
Azzara, Riccardo Maria / Galassi, Stefano / Garuglieri, Sara / Paradiso, Michele / Tanganelli, Marco	Analysis of vibrations recorded inside the cemetery area of Incisa, central Italy	e00623
Cheytani, M. / Chan, S. L. I.	The applicability of the Wenner method for resistivity measurement of concrete in atmospheric conditions	e00663
Mohammed, Azad A. / Rafiq, Serwan K. / Hamid, Niyan A.	The assessment of concrete subjected to preloading using non destructive testing methods	e00705
Chissama, Kapila S. S. / Picado-Santos, Luis G.	Assessment of crumb rubber Stone Mastic asphalt potential to be used in Angola	e00598
Deifalla, A.	Assessment of one-way shear design of RC elements subjected to axial tension	e00620
Usta, Pınar	Assessment of structural behavior of historic masonry minarets	e00665
Danso, Humphrey / Akwaboah, Mary	Assessment of the quality of burnt bricks produce in Ghana: The case of Ashanti region	e00708
Deng, Zhiheng / Guo, Jianhua / Yu, Junjie / Liu, Bing	Axial compression performance of coral concrete-filled aluminium tube (CCFAT) square stub columns	e00697
Abdulrahman, Alan Saeed / Kadir, Mohamed Raouf Abdul	Behavior and flexural strength of fire-damaged high-strength reinforced rectangular concrete beams with tension or compression zones exposed to fire repaired with CFRP sheets	e00779
Taher, Sundis M. S. / Saadullah, Shireen T. / Haido, James H. / Tayeh, Bassam A.	Behavior of geopolymer concrete deep beams containing waste aggregate of glass and limestone as a partial replacement of natural sand	e00744
Al-Rousan, Rajai Z. / Alkhawaldeh, Ayah	Behavior of heated damaged reinforced concrete beam-column joints strengthened with FRP	e00584
Al-Rousan, Rajai Z.	The behavior of heated damaged shear-deficient RC beams reinforced internally with welded wire mesh	e00687
Obaidat, Yasmeen Taleb / Barham, Wasim S. / Obaidat, Ala' Taleb / Attar, Khaled M.	Behavior of NSM CFRP Reinforced Concrete Columns: Experimental and Analytical Work	e00589
El-Mandouh, Mahmoud A. / Omar, Mostafa S. / Abd El-Maula, Ahmed S.	Behaviour of RC Flat Slabs with Openings Strengthened with CFRP	e00587
Wongkvanklom, Athika / Posi, Patcharapol / Kampala, Apichit / Kaewngao, Traitot / Chindaprasirt, Prinya	Beneficial utilization of recycled asphaltic concrete aggregate in high calcium fly ash geopolymer concrete	e00615
Saeed, Haitham H. / Abdulhamed, Ayman A.	Bond behavior of dual headed bars in concrete structures	e00553
Widanage, C. / Gamage, J. C. P. H. / De Silva, G. I. P.	Bond characteristics of CFRP strengthened concrete members bonded using Modified Engineered Cementitious Composite	e00766
Ahmed, Khondaker Sakil / Shahjalal, Md. / Siddique, Tanvir Ahmed / Keng, Ang Kok	Bond strength of post-installed high strength deformed rebar in concrete	e00581
Li, Yeou-Fong / Chen, Ching-Kai / Chen, Walter	Case study of GFRP as a sheet-pile wall for stream bank protection in Taiwan	e00602
Milani, Alisson Simonetti / Lübeck, André / Mohamad, Gihad / Santos Neto, Almir Barros da Silva / Budny, Jaelson / Kosteski, Luis Eduardo	Case study of prototype and small-scale model behavior of clay blocks masonry under compression	e00684
Chindaprasirt, Prinya / Jitsangiam, Peerapong / Chalee, Wichian / Rattanasak, Ubolluk	Case study of the application of pervious fly ash geopolymer concrete for neutralization of acidic wastewater	e00770
Gerger, Sabrina / Baldermann, Andre / Dietzel, Martin	Caste stone formation in the MgO-H2O-organo system – Effect of citric, malic or acetic acid and MgO reactivity on type and composition of castables	e00606
Oukaili, Nazar K. / Merie, Hammad D.	CFRP strengthening efficiency on enhancement punching shear resistance of RC bubbled slabs with openings	e00641
Heerah, Mehreen Z. / Galobardes, Isaac / Dawson, Graham	Characterisation and Control of Cementitious Mixes with Colour Pigment Admixtures	e00571
Patil, Supriya Mahesh / Kasthurba, A. K. / Patil, Mahesh V.	Characterization and assessment of stone deterioration on Heritage Buildings	e00696
Mellaikhafi, Abdellah / Ouakarrouch, Mohamed / Benallel, Abderrahim / Tilioua, Amine / Ettakni, Mahmoud / Babaoui, Abdelhak / Garoum, Mohammed / Alaoui Hamdi, Moulay Ahmed	Characterization and thermal performance assessment of earthen adobes and walls additive with different date palm fibers	e00693
Rahman, Inayat Ur / Raheel, Muhammad / Wajahat Ali Khawaja, Muhammad / Khan, Rawid / Li, Jie / Khan, Arsalan / Khan, Muhammad Tariq	Characterization of engineering properties of weak subgrade soils with different pozzolanic & cementitious additives	e00676
Thomaz, William de Araujo / Miyaji, Dan Yushin / Possan, Edna	Comparative study of dynamic and static Young's modulus of concrete containing basaltic aggregates	e00645
Hu, Yehong / Chen, Jin / Zou, Feng / He, Meng / Mao, Jianguo / Liu, Xinglin / Zhou, Canjun / Yuan, Zhongxia	A comparative study of temperature of mass concrete placed in August and November based on on-site measurement	e00694
Jayasinghe, Thushara / Gunawardena, Tharaka / Mendis, Priyan	A comparative study on minimum shear reinforcement provisions in codes of practice for reinforced concrete beams	e00617
Garcia-Troncoso, Natividad / Li, Lufan / Cheng, Quan / Mo, Kim Hung / Ling, Tung-Chai	Comparative study on the properties and high temperature resistance of self-compacting concrete with various types of recycled aggregates	e00678
Mahmood, Hersh F. / Dabbagh, Hooshang / Mohammed, Azad A.	Comparative study on using chemical and natural admixtures (grape and mulberry extracts) for concrete	e00699
Pongsivasathit, Supasit / Petchgate, Warapot / Horpibulsuk, Suksun / Piyaphipat, Suthee	Composite contiguous pile wall and deep mixing column wall as a dam –Design, construction and performance	e00771
Revelo, Carlos F. / Correa, Mauricio / Aguilar, Claudio / Colorado, Henry A.	Composite materials made of waste tires and polyurethane resin: A case study of flexible tiles successfully applied in industry	e00681
Song, Hongwei / Liu, Jing / He, Kaiyu / Ahmad, Waqas	A comprehensive overview of jute fiber reinforced cementitious composites	e00724
Liu, Yue / Zhuge, Yan / Chow, Christopher W. K. / Keegan, Alexandra / Li, Danda / Pham, Phuong Ngoc / Li, Luo	Compressive behaviour and environmental evaluation of sludge-derived masonry walls	e00736
Aocharoen, Yanika / Chotickai, Piya	Compressive mechanical properties of cement mortar containing recycled high-density polyethylene aggregates: Stress–strain relationship	e00752
Murad, Yasmin	Compressive strength prediction for concrete modified with nanomaterials	e00660
Al-Rashed, Radi / Al-Jabari, Maher	Concrete protection by combined hygroscopic and hydrophilic crystallization waterproofing applied to fresh concrete	e00635
Abdelhalim, Reda A. / Ramli, Harris / Selamat, Mohamad R.	Cone penetration measurements in oil-contaminated sand stabilized by lateritic soil and potential usage in concrete mix	e00580
Rodsin, Kittipoom	Confinement effects of glass FRP on circular concrete columns made with crushed fired clay bricks as coarse aggregates	e00609
Simão, L. / Fernandes, E. / Hotza, D. / Ribeiro, M. J. / Montedo, O. R. K. / Raupp-Pereira, F.	Controlling efflorescence in geopolymers: A new approach	e00740
Chu, Duc Chinh / Kleib, Joelle / Amar, Mouhamadou / Benzerzour, Mahfoud / Abriak, Nor-Edine	Determination of the degree of hydration of Portland cement using three different approaches: Scanning electron microscopy (SEM-BSE) and Thermogravimetric analysis (TGA)	e00754
Güngör, Didem / Özen, Sevgi	Development and characterization of clinoptilolite-, mordenite-, and analcime-based geopolymers: A comparative study	e00576
Aziz, Muhammad Arif / Zubair, Mukarram / Saleem, Muhammad	Development and testing of cellulose nanocrystal-based concrete	e00761
Vianna Bahiense, Alexandre / Alexandre, Jonas / Xavier, Gustavo de Castro / Garcez de Azevedo, Afonso Rangel / Monteiro, Sergio Neves	Dosage of interlocking paving with ornamental rock waste: An experimental design approach, particle packing and polluting potential	e00596
Wasim, Muhammad / Ngo, Tuan Duc / Law, David	Durability performance of reinforced waste-based geopolymer foam concrete under exposure to various corrosive environments	e00703
Napolitano, Rosanna / Forni, Daniele / Menna, Costantino / Asprone, Domenico / Cadoni, Ezio	Dynamic characterization of the layer-interface properties of 3D-printed concrete elements	e00780
Gerges, Najib / Issa, Camille A. / Antoun, Marc / Sleiman, Elias / Hallal, Fouad / Shamoun, Perla / Hayek, Joelle	Eco-friendly mortar: Optimum combination of wood ash, crumb rubber, and fine crushed glass	e00588
Annibaldi, V. / Cucchiella, F. / Rotilio, M.	Economic and environmental assessment of thermal insulation. A case study in the Italian context	e00682
Aziz, Ayoub / Benzaouak, Abdellah / Bellil, Abdelilah / Alomayri, Thamer / Ni el Hassani, Iz-Eddine ELAMRA / Achab, Mohammed / El Azhari, Hamid / Et-Tayea, Yassine / Shaikh, Faiz Uddin Ahmed	Effect of acidic volcanic perlite rock on physio-mechanical properties and microstructure of natural pozzolan based geopolymers	e00712
Salih, Choman / Manalo, Allan / Ferdous, Wahid / Yu, Peng / Abousnina, Rajab / Heyer, Tom / Schubel, Peter	Effect of bending and compressive modulus of elasticity on the behaviour of timber-alternative railway sleepers supported by ballast	e00597
Paul, Dibyendu / Suresh, Machavarapu / Pal, Manish	Effect of CENEX polymer on the performance of bituminous concrete and dense bituminous macadam of pavement	e00558
Özen, Sevgi / Uzal, Burak	Effect of characteristics of natural zeolites on their geopolymerization	e00715
Mathews, Mervin Ealiyas / Anand, N. / Lublóy, Éva / Kiran, Tattukolla	Effect of elevated temperature on interfacial shear transfer capacity of self-compacting concrete	e00753
Chindaprasirt, Prinya / Boonbamrung, Thammanun / Poolsong, Apivich / Kroehong, Wunchock	Effect of elevated temperature on polypropylene fiber reinforced alkali-activated high calcium fly ash paste	e00554
Tayeh, Bassam A. / Zeyad, Abdullah M. / Agwa, Ibrahim Saad / Amin, Mohamed	Effect of elevated temperatures on mechanical properties of lightweight geopolymer concrete	e00673
Al-Yasiri, Qudama / Szabó, Márta	Effect of encapsulation area on the thermal performance of PCM incorporated concrete bricks: A case study under Iraq summer conditions	e00686
Bicer, Ayse	The effect of fly ash and pine tree resin on thermo-mechanical properties of concretes with expanded clay aggregates	e00624
Kumbasaroglu, Atila / Yalciner, Kürşad / Yalciner, Hakan / Turan, Ahmet I. / Celik, Alper	Effect of polypropylene fibers on the development lengths of reinforcement bars of slabs	e00680
Islam, Md. Jahidul / Shahjalal, Md.	Effect of polypropylene plastic on concrete properties as a partial replacement of stone and brick aggregate	e00627
Horsakulthai, Veera	Effect of recycled concrete powder on strength, electrical resistivity, and water absorption of self-compacting mortars	e00725
Aules, Wisam A. / Raoof, Saad M.	Effect of shape modification on the confinement effectiveness of CFRP strengthened square concrete compression members: Experimental study	e00679
de Azevedo, Afonso R. G. / Marvila, Markssuel T. / Ali, Mujahid / Khan, Muhammad Imran / Masood, Faisal / Vieira, Carlos Maurício F.	Effect of the addition and processing of glass polishing waste on the durability of geopolymeric mortars	e00662
Jabbar, Adil M. / Hamood, Mohammed J. / Mohammed, Dhiyaa H.	The effect of using basalt fibers compared to steel fibers on the shear behavior of ultra-high performance concrete T-beam	e00702
Hamzah, Hussein K. / Huseien, Ghasan Fahim / Asaad, Mohammad Ali / Georgescu, Dan Paul / Ghoshal, S. K. / Alrshoudi, Fahed	Effect of waste glass bottles-derived nanopowder as slag replacement on mortars with alkali activation: Durability characteristics	e00775
Xu, Jianguang / Zhao, Tiejun / Lu, Wenpan	Effects of applied load and its direction on the permeability behavior of concrete: A case study	e00643
Awolusi, Temitope Funmilayo / Olatunbosun Sojobi, Adebayo / Oguntayo, Daniel Oluwafemi / Akinkurolere, Olufunke O. / Orogbade, B. O.	Effects of calcined clay, sawdust ash and chemical admixtures on Strength and Properties of concrete for pavement and flooring applications using Taguchi approach	e00568
Köksal, Fuat / Nazlı, Turan / Benli, Ahmet / Gencel, Osman / Kaplan, Gökhan	The effects of cement type and expanded vermiculite powder on the thermo- mechanical characteristics and durability of lightweight mortars at high temperature and RSM modelling	e00709
Shin, Hyun-Oh / Kim, Kyungteak / Oh, Taekgeun / Yoo, Doo-Yeol	Effects of fiber type and specimen thickness on flexural behavior of ultra-high-performance fiber-reinforced concrete subjected to uniaxial and biaxial stresses	e00726
Fakhri, Mansour / shahryari, Ehsan	The effects of nano zinc oxide (ZnO) and nano reduced graphene oxide (RGO) on moisture susceptibility property of stone mastic asphalt (SMA)	e00655
Gideon, Ayim-Mensah / Milan, Radosavljevic	Effects of nitinol on the ductile performance of ultra high ductility fibre reinforced cementitious composite	e00582
Mezquida-Alcaraz, Eduardo J. / Navarro-Gregori, Juan / Martí-Vargas, José R. / Serna-Ros, Pedro	Effects of tension stiffening and shrinkage on the flexural behavior of reinforced UHPFRC beams	e00746
Hussain, Iqrar / Ali, Babar / Rashid, Muhammad Usman / Amir, Muhammad Talha / Riaz, Sobia / Ali, Asif	Engineering properties of factory manufactured paving blocks utilizing steel slag as cement replacement	e00755
Chen, Peiyuan / Zhang, Liheng / Wang, Yonghui / Fang, Yi / Zhang, Feng / Xu, Ying	Environmentally friendly utilization of coal gangue as aggregates for shotcrete used in the construction of coal mine tunnel	e00751
Amiri, Mostafa / Hatami, Farzad / Golafshani, Emadaldin Mohammadi	Evaluating the synergic effect of waste rubber powder and recycled concrete aggregate on mechanical properties and durability of concrete	e00639
Calis, Gokhan / Yildizel, Sadık Alper / Erzin, Selin / Tayeh, Bassam A.	Evaluation and optimisation of foam concrete containing ground calcium carbonate and glass fibre (experimental and modelling study)	e00625
Noura, Sajjad / Al-Sabaeei, Abdulnaser M. / Safaeldeen, Gailan Ismat / Muniandy, Ratnasamy / Carter, Alan	Evaluation of measured and predicted resilient modulus of rubberized Stone Mastic Asphalt (SMA) modified with truck tire rubber powder	e00633
Cakir, Ferit	Evaluation of Mechanical Properties of Chopped Glass/Basalt Fibers Reinforced Polymer Mortars	e00612
Nassar, Roz-Ud-Din / Soroushian, Parviz / Balachandra, Anagi / Nassar, Shumayal / Weerasiri, Rankothge / Darsanasiri, Nalin / Abdol, Nastran	Evaluation of refined cement-based matrix systems for extrusion of wood fiber cement	e00714
Wang, Jianmin / Xiao, Ziqiang / Zhu, Chengfeng / Feng, Chuxiang / Liu, Junzhe	Experiment on the bonding performance of the lightweight aggregate and normal weight concrete composite beams	e00565
Arif, Rehan / Khitab, Anwar / Kirgiz, Mehmet Serkan / Khan, Raja Bilal Nasar / Tayyab, Seemab / Khan, Riaz Akhtar / Anwar, Waqas / Arshad, Muhammad Tausif	Experimental analysis on partial replacement of cement with brick powder in concrete	e00749
Hussein, Luma Fadhil / Khattab, Mohammed M. / Farman, Mustafa Shakir	Experimental and finite element studies on the behavior of hybrid reinforced concrete beams	e00607
Lokuge, Weena / Otoom, Omar / Borzou, Rahmin / Navaratnam, Satheeskumar / Herath, Nilupa / Thambiratnam, David	Experimental and numerical analysis on the effectiveness of GFRP wrapping system on timber pile rehabilitation	e00552
Otoom, Omar F. / Lokuge, Weena / Karunasena, Warna / Manalo, Allan C. / Ozbakkaloglu, Togay / Thambiratnam, David	Experimental and numerical evaluation of the compression behaviour of GFRP-wrapped infill materials	e00654
Taleb Obaidat, Ala’ / Ashteyat, Ahmed M. / Obaidat, Yasmeen Taleb / Al-Btoush, Aseel Yousef / Hanandeh, Shadi	Experimental and numerical study of strengthening and repairing heat-damaged RC circular column using hybrid system of CFRP	e00742
Naotunna, Chavin N. / Fosså, Kjell T.	Experimental investigation of crack width variation along the concrete cover depth in reinforced concrete specimens with ribbed bars and smooth bars	e00593
Zhang, Hongbo / Liu, Mingpeng / Shuo, Zhang / Zhao, Zhizhong / Sun, Yuhai / Song, Xiuguang / Wang, Hao / Zhang, Xinyi / Wu, Jianqing	An experimental investigation of the triaxial shear behaviors of silt-based foamed concrete	e00713
Ibrahim, Yasser E. / Hameed, Asif / Qazi, Asad Ullah / Rasool, Ali Murtaza / Latif, Muhammad Farhan / Qureshi, Mohsin Usman	Experimental Response of Cold-formed Steel Stud Shear Wall with hardboard sheathing under seismic loading	e00574
Hou, Wen-Qi / Yang, Jia-Jun / Zhang, Zheng-Xin / Yuan, Xiao-Qian	Experimental study and application of manufactured sand self-compacting concrete in concrete-filled-steel-tube arch bridge: A case study	e00718
Sirisonthi, Athasit / Suparp, Suniti / Joyklad, Panuwat / Hussain, Qudeer / Julphunthong, Phongthorn	Experimental study of the load-deformation behaviour of the precast post-tensioned continuous girder for straddle monorail: Full-scale load test under service and ultimate loading conditions	e00666
Zhang, Zhiwen / Abbas, Ebrahim M. A. / Wang, Yi / Yan, Weihua / Cai, Xiaoning / Yao, Shan / Tang, Rong / Cao, Dafu / Lu, Weigang / Ge, Wenjie	Experimental study on flexural behavior of the BFRC-concrete composite beams	e00738
Lin, Run-Sheng / Han, Yi / Wang, Xiao-Yong	Experimental study on optimum proportioning of Portland cements, limestone, metakaolin, and fly ash for obtaining quaternary cementitious composites	e00691
Emad, Wael / Salih, Ahmed / Kurda, Rawaz	Experimental study using ASTM and BS standards and model evaluations to predict the compressive strength of the cement grouted sands modified with polymer	e00600
Murts, Gebrehiwet Tadese / Ram, Chhotu / Gebru, Kibrom Alebel	Fabrication and characterization of cement based floor tiles using eggshell and plastic wastes as a low cost construction materials	e00747
Ahmed, M. M. / El-Naggar, K. A. M. / Tarek, Dalia / Ragab, Ayman / Sameh, Hesham / Zeyad, Abdullah M. / Tayeh, Bassam A. / Maafa, Ibrahim M. / Yousef, Ayman	Fabrication of thermal insulation geopolymer bricks using ferrosilicon slag and alumina waste	e00737
Srinivasan, K. / Sudarsan, J. S. / Nithiyanantham, S.	Feasibility assessment of bulk density property of carbon nano tube as a viable alternative to reinforcement steel in construction projects	e00716
Ibrahim, Yasser E. / Nabil, Marwa	Finite Element Analysis of Multistory structures subjected to Train-Induced Vibrations considering Soil-Structure Interaction	e00592
Nguyen, Trung Kien / Nguyen, Ngoc Tan	Finite element investigation of the shear performance of corroded RC deep beams without shear reinforcement	e00757
Magbool, Hassan M. / El-Abbasy, Ahmed A.	Finite element verification of the unreliability of using structural plain concrete footing under reinforced concrete footing	e00734
Suntharalingam, Thadshajini / Gatheeshgar, Perampalam / Upasiri, Irindu / Poologanathan, Keerthan / Nagaratnam, Brabha / Corradi, Marco / Nuwanthika, Dilini	Fire performance of innovative 3D printed concrete composite wall panels – A Numerical Study	e00586
Nassif, Mona K. / Erfan, Abeer M. / Fadel, Osama T. / El-Sayed, Taha A.	Flexural behavior of high strength concrete deep beams reinforced with GFRP bars	e00613
El-Sayed, Taha A. / Algash, Yasser A.	Flexural behavior of ultra-high performance geopolymer RC beams reinforced with GFRP bars	e00604
Li, Sensen / Fan, Hualin	Flexural behaviors and local failure analyses of EPS foam-filled GFRC truss-core sandwich panels	e00688
Dawood, Eethar Thanon / Shawkat, Abdalaziz Saad / Abdullah, Mafaz Hani	Flexural performance of ferrocement based on sustainable high-performance mortar	e00566
Lim, Su-Shen / Wong, Jing-Ying / Yip, Chun-Chieh / Pang, Jet-Wei	Flexural strength test on new profiled composite slab system	e00638
Panahi, Minoo / Zareei, Seyed Alireza / Izadi, Ardavan	Flexural strengthening of reinforced concrete beams through externally bonded FRP sheets and near surface mounted FRP bars	e00601
Zhao, Han / Ren, Junda / Chen, Zhuo / Luan, Hai / Yi, Junyan	Freeze and thaw field investigation of foamed asphalt cold recycling mixture in cold region	e00710
Lencis, Uldis / Udris, Aigars / Korjakins, Aleksandrs	frost influence on the ultrasonic pulse velocity in concrete at early phases of hydration process	e00614
Zorluer, Ismail / Cavus, Ugur Safak	Fuzzy logic assessment of engineering properties of granular soil with wastes for environment protection and road base use	e00774
Kahandawa Arachchi, K. A. D. Y. T. / Selvaratnam, A. / Gamage, J. C. P. H. / De Silva, G. I. P.	Green composite plaster with modified morphology for enhanced thermal comfort in buildings	e00611
Todaro, Carmine	Grouting of Cohesionless Soils by Means of Colloidal Nanosilica	e00577
Köksal, Fuat / Yıldırım, Mahmut Sami / Benli, Ahmet / Gencel, Osman	Hybrid effect of micro-steel and basalt fibers on physico-mechanical properties and durability of mortars with silica fume	e00649
Zhao, Yan / Liu, Bai / Li, Huaming / Liu, Hongbo / Zhou, Guangchun	Hysteretic stressing state features of RCB shear walls revealed by structural stressing state theory	e00674
Taher, Salah F. / Ghazy, Mariam F. / Abd Elaty, Metwally A. / Elmasry, Mohamed / Elwan, Sherif	Identification of fracture parameters of fiber reinforced concrete beams made of various binders	e00573
Al-Rousan, Rajai Z.	The impact of the welded wire mesh as internal reinforcement on the flexural behavior of RC beams exposed to elevated temperature	e00618
Andiç-Çakir, Özge / Son, Arif Emre / Sürmelioğlu, Setenay / Tosun, Erdoğan / Sarikanat, Mehmet	Improvement of Traditional Clay Bricks’ Thermal Insulation Characteristics by Using Waste Materials	e00560
El-Sayed, Taha Awadallah	Improving the performance of UHPC columns exposed to axial load and elevated temperature	e00748
Saleh, Hosam M. / Salman, Aida A. / Faheim, Abeer A. / El-Sayed, Abeer M.	Influence of aggressive environmental impacts on clean, lightweight bricks made from cement kiln dust and grated polystyrene	e00759
Alomayri, Thamer / Adesina, Adeyemi / Das, Shaswat	Influence of amorphous raw rice husk ash as precursor and curing condition on the performance of alkali activated concrete	e00777
Rokitowski, Przemysław / Bzówka, Joanna / Grygierek, Marcin	Influence of high moisture content on road pavement structure: A Polish case study	e00594
Malacarne, C. S. / Longhi, M. A. / Silva, M. R. C. / Gonçalves, J. P. / Rodríguez, E. D. / Kirchheim, A. P.	Influence of low-grade materials as clinker substitute on the rheological behavior, hydration and mechanical performance of ternary cements	e00776
da Silva, Júlio Lopes / Lordsleem, Alberto Casado	Influence of mixer type and mixing time on the multipurpose mortars properties	e00562
Manjunatha, M. / Seth, Dinesh / Balaji, K. V. G. D.	Influence of PVC waste powder and silica fume on strength and microstructure properties of concrete: An experimental study	e00610
Shirgaonkar, Aniket A. / Patil, Yogesh D. / Patil, Hemant S.	Influence of stiffeners and pattern of shear screws on behaviour of cold formed profiled deck composite floor	e00572
Hossain, Md. Uzzal / Dong, Yahong / Thomas Ng, S.	Influence of supplementary cementitious materials in sustainability performance of concrete industry: A case study in Hong Kong	e00659
Sirin, Okan / Ohiduzzaman, Md / Kassem, Emad	Influence of temperature on tire-pavement noise in hot climates: Qatar case	e00651
Tangaramvong, Sawekchai / Nuaklong, Peem / Khine, May Thazin / Jongvivatsakul, Pitcha	The influences of granite industry waste on concrete properties with different strength grades	e00669
Szeląg, Maciej	Intelligent prediction modeling of the post-heating mechanical performance of the brick powder modified cement paste based on the cracking patterns properties	e00668
Nodari, Claudia / Crispino, Maurizio / Toraldo, Emanuele	Laboratory investigation on the use of recycled materials in bituminous mixtures for dense-graded wearing course	e00556
Amran, Mugahed / Al-Fakih, Amin / Chu, S. H. / Fediuk, Roman / Haruna, Sani / Azevedo, Afonso / Vatin, Nikolai	Long-term durability properties of geopolymer concrete: An in-depth review	e00661
Hossain, Mohammad Shakhawat / Han, Seungyeon / Kim, Seong Kwon / Yun, Kyong-Ku	Long-term effect of accelerator content on flexural toughness of steel fiber reinforced shotcrete for tunnel construction	e00706
Nassar, Roz-Ud-Din / Soroushian, Parviz / Sufyan-Ud-Din, Muhammad	Long-term field performance of concrete produced with powder waste glass as partial replacement of cement	e00745
Meng, Tao / Lian, Songsong / Yu, Hongming / Yang, Chaojun / Wang, Menghua	Long-term influence of tailings wastewater on mechanical performance and microstructure of dam concrete: A case study in southeastern China	e00720
Karrech, A. / Dong, M. / Skut, J. / Elchalakani, M. / Shahin, M. A.	Management and valorisation of delithiated β-spodumene and its processing stream	e00671
Hamid, Salma / Naji, Khalid / Younis, Adel / Ebead, Usama	Material performance and cost effectiveness of seawater-mixed rubberized concrete	e00735
Wang, Shuhong / Jierula, Alipujiang / Wang, Pengyu / Zhao, Yong	Mechanical behaviors of "easy cracking zones" of precast rectangular utility tunnels	e00648
Maho, Buchit / Sukontasukkul, Piti / Sua-iam, Gritsada / Sappakittipakorn, Manote / Intarabut, Darrakorn / Suksiripattanapong, Cherdsak / Chindaprasirt, Prinya / Limkatanyu, Suchart	Mechanical properties and electrical resistivity of multiwall carbon nanotubes incorporated into high calcium fly ash geopolymer	e00785
Thiam, Moussa / Fall, Mamadou / Diarra, M. S.	Mechanical properties of a mortar with melted plastic waste as the only binder: Influence of material composition and curing regime, and application in Bamako	e00634
Chegenizadeh, Amin / Peters, Bradley / Nikraz, Hamid	Mechanical properties of stone mastic asphalt containing high-density polyethene: An Australian case	e00631
Teixeira Marvila, Markssuel / Garcez de Azevedo, Afonso Rangel / de Oliveira, Leandro Barbosa / Xavier, Gustavo de Castro / Vieira, Carlos Maurício Fontes	Mechanical, physical and durability properties of activated alkali cement based on blast furnace slag as a function of %Na2O	e00723
Abu-Saleem, Mahmoud / Zhuge, Yan / Hassanli, Reza / Ellis, Mark / Rahman, Md Mizanur / Levett, Peter	Microwave radiation treatment to improve the strength of recycled plastic aggregate concrete	e00728
Muntongkaw, Sarun / Pianklang, Sompratthana / Tangboriboon, Nuchnapa	Modifications to improve properties of gypsum ceiling composites as multifunctional construction by embedding Typha angustifolia fiber and natural rubber latex compound	e00658
Permeh, Samanbar / Lau, Kingsley / Tansel, Berrin	Moisture and ion mobilization and stratification in post-tensioned (PT) grout during hydration	e00644
Jattak, Zulfiqar Ali / Hassan, Norhidayah Abdul / Satar, Mohd Khairul Idham Mohd	Moisture susceptibility and environmental impact of warm mix asphalt containing bottom ash	e00636
Dall Bello de Souza Risson, Kathleen / Sandoval, Gersson F. B. / Cofani Pinto, Francieli S. / Camargo, Marcos / de Moura, André Campos / Toralles, Berenice Martins	Molding Procedure for Pervious Concrete Specimens by Density Control	e00619
Guzmán-Torres, José A. / Domínguez-Mota, Francisco J. / Alonso-Guzmán, Elia M.	A multi-layer approach to classify the risk of corrosion in concrete specimens that contain different additives	e00719
Zerfu, Kefiyalew / Ekaputri, Januarti Jaya	Nonlinear finite element study on element size effects in alkali-activated fly ash based reinforced geopolymer concrete beam	e00765
Attia Fouda, Mohamed / El-Kateb, Mahmoud / Elkateb, Tamer / Khalil, Ayman	Numerical investigation for failure load and contact stress beneath RC square footing resting on cohesionless soil	e00656
Terentjevas, Justas / Šadauskaitė, Monika / Šadauskienė, Jolanta / Ramanauskas, Juozas / Buska, Andrius / Fokaides, Paris A.	Numerical investigation of buildings point thermal bridges observed on window-thermal insulation interface	e00768
Al-Rousan, Rajai Z. / Alkhawaldeh, Ayah	Numerical simulation of the influence of bond strength degradation on the behavior of reinforced concrete beam-column joints externally strengthened with FRP sheets	e00567
Liu, Zu’an / Hou, Jiawen / Meng, Xi / Dewancker, Bart Julien	A numerical study on the effect of phase-change material (PCM) parameters on the thermal performance of lightweight building walls	e00758
de Alencar Monteiro, Vitor Moreira / de Andrade Silva, Flávio	On the design of the fiber reinforced shotcrete applied as primary rock support in the Cuiabá underground mining excavations: A case study	e00784
Nandapala, Kasun / Halwatura, Rangika	Operational feasibility of a hybrid roof insulation system with bamboo and vegetation: An experimental study in tropical climatic conditions	e00616
Loor, Amir Shagholani / Bidgoli, Mahmood Rabani / Hamid, Mazaheri	Optimization and buckling of rupture building beams reinforced by steel fibers on the basis of adaptive improved harmony search-harmonic differential quadrature methods	e00647
Saeed, Saeed Modibbo / Hartadi Sutanto, Muslich / Napiah, Madzlan / Usman, Aliyu / Batari, Ahmad / Aman, Mohamad Yusri / Aliyu Yaro, Nura Shehu	Optimization of rubber seed oil content as bio-oil rejuvenator and total water content for cold recycled asphalt mixtures using response surface methodology	e00561
Wang, Hui-Ru / Wang, Yan-Min / Qi, Mei-Li / Wang, Qing-Liang / Li, Xian / Zhu, Xing-Xing / Yu, Xiao-Qing / Liu, Zhi-min	PEG/diatomite modified Asphalt Mixture with Self-Regulating temperature property	e00585
Burghardt, Tomasz E. / Babić, Darko / Pashkevich, Anton	Performance and environmental assessment of prefabricated retroreflective spots for road marking	e00555
Yang, Hee Jun / Lee, Chang-Hong / Shim, Sang-Hyo / Kim, Jang-Ho Jay / Lee, Ho-Jae / Park, JoonWoo	Performance evaluation of cement paste incorporating ferro-nickel slag powder under elevated temperatures	e00727
Aliyu Yaro, Nura Shehu / Napiah, Madzlan Bin / Hartadi Sutanto, Muslich / Usman, Aliyu / Saeed, Saeed Modibbo	Performance evaluation of waste palm oil fiber reinforced stone matrix asphalt mixtures using traditional and sequential mixing processes	e00783
Le, Van Phuc	Performance of asphalt binder containing sugarcane waste molasses in hot mix asphalt	e00595
Yanou, Rachel Nkwaju / Kaze, Rodrigue Cyriaque / Adesina, Adeyemi / Nemaleu, Juvenal Giogetti Deutou / Jiofack, Séverin Bidias Keumeka / Yankwa Djobo, Jean Noël	Performance of laterite-based geopolymers reinforced with sugarcane bagasse fibers	e00762
Ferreira, José Wilson dos Santos / Senez, Phillipe Campello / Casagrande, Michéle Dal Toé	Pet fiber reinforced sand performance under triaxial and plate load tests	e00741
Cherifi, Hicham / Chaouni, Abdel-Ali / Fattah, Ghizlane / Jalouni, Abdessamad / Jabri, Imane / El Asmi, Hicham / Raini, Imad	Physico-mechanical characterization of schists in Tazzeka complex [Taza Province, Eastern Morocco]	e00692
Almutairi, Ahmad L. / Tayeh, Bassam A. / Adesina, Adeyemi / Isleem, Haytham F. / Zeyad, Abdullah M.	Potential applications of geopolymer concrete in construction: A review	e00733
Alemu, Abel Shiferaw / Yoon, Jinyoung / Tafesse, Million / Seo, Yo-Seob / Kim, Hyeong-Ki / Pyo, Sukhoon	Practical considerations of porosity, strength, and acoustic absorption of structural pervious concrete	e00764
Aneke, Frank Ikechukwu / Mostafa, Mohamed M. H. / El Kamash, Walid	Pre-compression and capillarity effect of treated expansive subgrade subjected to compressive and tensile loadings	e00575
Gowripalan, Nadarajah / Shakor, Pshtiwan / Rocker, Paul	Pressure exerted on formwork by self-compacting concrete at early ages: A review	e00642
Chatzopoulos, Alexandros / Sideris, Kosmas K. / Tassos, Christos	Production of concretes using slag aggregates: Contribution of increasing the durability and sustainability of constructions	e00711
Kleib, Joelle / Aouad, Georges / Abriak, Nor-Edine / Benzerzour, Mahfoud	Production of Portland cement clinker from French Municipal Solid Waste Incineration Bottom Ash	e00629
Islam, M. Zahedul / Sohel, Kazi M. A. / Al-Jabri, Khalifa / Al Harthy, A.	Properties of concrete with ferrochrome slag as a fine aggregate at elevated temperatures	e00599
Saeed, Haitham H.	Properties of polymer impregnated concrete spacers	e00772
Yoosuk, Piyathida / Suksiripattanapong, Cherdsak / Sukontasukkul, Piti / Chindaprasirt, Prinya	Properties of polypropylene fiber reinforced cellular lightweight high calcium fly ash geopolymer mortar	e00730
Nwaubani, Sunday O. / Parsons, Lewis A.	Properties, durability and microstructure of concrete incorporating waste electrical and electronic plastics as partial replacement for aggregates in concrete	e00731
Fatemi, Saeed / Bolouri Bazaz, Jafar / Ziaee, Seyed Ali	The pros and cons of using calcium lignosulfonate as a recycled anti-aging additive on engineering properties of bituminous mastics	e00739
Boateng, Kwadwo Appiah / Adubofour Tuffour, Yaw / Obeng-Atuah, Daniel / Agyeman, Stephen	Quality of cold-mix asphalt in bituminous pavement maintenance in Ghana: Preliminary indications	e00769
Bakaiyang, Lemankreo / Madjadoumbaye, Jérémie / Boussafir, Yasmina / Szymkiewicz, Fabien / Duc, Myriam	Re-use in road construction of a Karal-type clay-rich soil from North Cameroon after a lime/cement mixed treatment using two different limes	e00626
Saleem, Muhammad Azhar / Zafar, Muhammad N. / Saleem, Muhammad Mazhar / Xia, Jun	Recent developments in the prefabricated bridge deck systems	e00750
Ibrahim, K. I. M.	Recycled waste glass powder as a partial replacement of cement in concrete containing silica fume and fly ash	e00630
Berrocal-Olave, Arnoldo / Saba, Manuel / Olmo-Garcia, Juan C.	Relationship between damage and structural vulnerability in historical heritage: Case study of San Fernando de Bocachica Fort, Cartagena de Indias	e00695
Sun, Dandan / Huang, Changfu / Cao, Zhenjie / Wu, Kai / Zhang, Lihai	Reliability assessment of concrete under external sulfate attack	e00690
Feng, Bowen / Liu, JieSheng / Wei, Jing / Zhang, Yidi / Chen, Yaohua / Wang, Lei / Chen, Yongpeng / Sun, Zhengguang	Research on properties and durability of desalinated sea sand cement modified with fly ash	e00675
Chen, Yuheng / Chen, Zhiguo / Xiang, Qian / Qin, Weijun / Yi, Junyan	Research on the influence of RAP and aged asphalt on the performance of plant-mixed hot recycled asphalt mixture and blended asphalt	e00722
Zhao, Xiaofei / Rahman, Minhaz Ur / Dissanayaka, Tharanga / Gharagheizi, Farhad / Lacerda, Carla / Senadheera, Sanjaya / Hedden, Ronald C. / Christopher, Gordon F.	Rheological behavior of a low crystallinity polyolefin-modified asphalt binder for flexible pavements	e00640
Ferreira, José Wilson dos Santos / Casagrande, Michéle Dal Toé / Teixeira, Raquel Souza	Sample dimension effect on equations controlling tensile and compressive strength of cement-stabilized sandy soil under optimal compaction conditions	e00763
Ahmad, Waqas / Ahmad, Ayaz / Ostrowski, Krzysztof Adam / Aslam, Fahid / Joyklad, Panuwat	A scientometric review of waste material utilization in concrete for sustainable construction	e00683
Bagger, Anne Mette T. / Kunther, Wolfgang / Sigvardsen, Nina M. / Jensen, Pernille E.	Screening for key material parameters affecting early-age and mechanical properties of blended cementitious binders with mine tailings	e00608
Li, Changyong / Zhao, Mingshuang / Yang, Jinlong / Xu, Wenxiao / Zhang, Xiaoyan	Shear testing of reinforced hybrid composite beams made of SFRELC and partial higher-strength conventional concrete	e00721
Raefat, Saad / Garoum, Mohammed / Laaroussi, Najma / Chihab, Yassine	A simple laboratory flash apparatus for thermal diffusivity measurement: Modeling and application for composite material based on clay and straw	e00657
Abid, Sallal R. / Ali, Sajjad H. / Murali, G. / Al-Gasham, Thaar S.	A simple suggested approach to reduce the testing time of concrete surface abrasion using ASTM C1138	e00685
Blikharskyy, Yaroslav / Selejdak, Jacek / Kopiika, Nadiia	Specifics of corrosion processes in thermally strengthened rebar	e00646
Akhtar, Mohammad Nadeem / Jameel, Mohammed / Al-Shamrani, Abdullah M. / Khan, Nadeem A. / Ibrahim, Zainah / Akhtar, J. N.	Stability and Permeability Characteristics of Porous Asphalt Pavement: An Experimental Case Study	e00591
Podolsky, Z. / Liu, J. / Dinh, H. / Doh, J. H. / Guerrieri, M. / Fragomeni, S.	State of the art on the application of waste materials in geopolymer concrete	e00637
Marathe, Shriram / Shetty, Thushar S. / Mithun, B. M. / Ranjith, A.	Strength and durability studies on air cured alkali activated pavement quality concrete mixes incorporating recycled aggregates	e00732
Yinh, Seyha / Hussain, Qudeer / Joyklad, Panuwat / Chaimahawan, Preeda / Rattanapitikon, Winyu / Limkatanyu, Suchart / Pimanmas, Amorn	Strengthening effect of natural fiber reinforced polymer composites (NFRP) on concrete	e00653
Cakir, Ferit / Acar, Volkan / Aydin, M. Raci / Aksar, Bora / Yildirim, Pınar	Strengthening of reinforced concrete beams without transverse reinforcement by using intraply hybrid composites	e00700
Kia, Alalea / Delens, Jasmine M. / Wong, Hong S. / Cheeseman, Christopher R.	Structural and hydrological design of permeable concrete pavements	e00564
Nadir, Wissam / Ali, Ammar Yasir / Kadhim, Majid M. A.	Structural behavior of hybrid reinforced concrete beam-column joints under cyclic load: State of the art review	e00707
Mohsin, Murtada S. / Alwash, Nameer A. / kadhum, Mohammed M.	Structural behavior of reinforced concrete beams with out of plane part	e00767
Gesualdo, Antonio / Fortunato, Antonio / Penta, Francesco / Monaco, Michela	Structural identification of tall buildings: a reinforced concrete structure as a case study	e00701
Todaro, Carmine / Carigi, Andrea / Martinelli, Daniele / Peila, Daniele	Study of the shear strength evolution over time of two-component backfilling grout in shield tunnelling	e00689
Zhang, Shouqi / Du, Shizhao / Ang, Yuan / Lu, Zhenbao	Study on performance of prestressed concrete hollow slab beams reinforced by grouting with ultra-high performance concrete	e00583
Ahmad, Waqas / Ahmad, Ayaz / Ostrowski, Krzysztof Adam / Aslam, Fahid / Joyklad, Panuwat / Zajdel, Paulina	Sustainable approach of using sugarcane bagasse ash in cement-based composites: A systematic review	e00698
Antoun, Marc / Issa, Camille A. / Aouad, Georges / Gerges, Najib	Sustainable Masonry Blocks: Olive Wood Waste as Substitute for Fine Aggregates	e00590
Titiksh, Abhyuday / Wanjari, Swapnil P.	Sustainable pavement quality concrete containing ultra-high volume fly ash in the presence of a novel superplasticizer	e00603
Ateş, Kübra Tümay / Şahin, Cenk / Kuvvetli, Yusuf / Küren, Bülent A. / Uysal, Aykut	Sustainable production in cement via artificial intelligence based decision support system: Case study	e00628
Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Rabie, Mohamed	Sustainable utilization of waste carbon black in alkali-activated mortar production	e00743
Bheel, Naraindas / Awoyera, Paul / Shar, Irfan Ali / Abbasi, Suhail Ahmed / Khahro, Shabir Hussain / Prakash A, Krishna	Synergic effect of millet husk ash and wheat straw ash on the fresh and hardened properties of Metakaolin-based self-compacting geopolymer concrete	e00729
Sayar, Sena / Sayin, Baris	Systematic strengthening scenarios for determination of most suitable retrofitting approach in a low-rise RC building	e00782
Mansour, Moustafa / El-Maaddawy, Tamer	Testing and modeling of deep beams strengthened with NSM-CFRP reinforcement around cutouts	e00670
Rahman, Md Tareq / Mohajerani, Abbas	Thermal conductivity and environmental aspects of cigarette butt modified asphalt	e00569
Ben Zaid, Zaineb / Tilioua, Amine / Lamaamar, Ibtissam / Ansari, Omar / Hamdi Alaoui, Moulay Ahmed	Thermal performance of clay-straw wall incorporating phase change materials in Errachidia city (South Eastern Morocco): A simulation approach	e00786
Eskander, Samir B. / Saleh, Hosam M. / Tawfik, Magda E. / Bayoumi, Talat A.	Towards potential applications of cement-polymer composites based on recycled polystyrene foam wastes on construction fields: Impact of exposure to water ecologies	e00664
Akhnoukh, Amin K. / Buckhalter, Chelsea	Ultra-high-performance concrete: Constituents, mechanical properties, applications and current challenges	e00559
Zuzulock, Merissa L. / Taylor, Oliver-Denzil S. / Maerz, Norbert H.	Understanding the Multiple Small Magnitude Induced Seismic Soil Fatigue Potential on Hazard Assessments	e00570
Malkanthi, S. N. / Wickramasinghe, W. G. S. / Perera, A. A. D. A. J.	Use of construction waste to modify soil grading for compressed stabilized earth blocks (CSEB) production	e00717
Guo, Lijie / Li, Wenchen / Namdar, Abdoullah	Using recycled aggregate for seismically monitoring of embankment-subsoil model	e00605
Luo, Wenjie / Liu, Shu / Jiang, Yuan / Guan, Xiwen / Hu, Yunfeng / Hu, Dongdong / Li, Bo	Utilisation of dewatered extracted soil in concrete blocks produced with Portland cement or alkali-activated slag: Engineering properties and sustainability	e00760
Liang, Chaofeng / Zhang, Yuming / Wu, Ruixue / Yang, Dingyi / Ma, Zhiming	The utilization of active recycled powder from various construction wastes in preparing ductile fiber-reinforced cementitious composites: A case study	e00650
Paul, Dibyendu / Suresh, Machavarapu / Pal, Manish	Utilization of fly ash and glass powder as fillers in steel slag asphalt mixtures	e00672
Xiao, Bolin / Wen, Zhenjiang / Miao, Shengjun / Gao, Qian	Utilization of steel slag for cemented tailings backfill: Hydration, strength, pore structure, and cost analysis	e00621
Mojapelo, K. S. / Kupolati, W. K. / Ndambuki, J. M. / Sadiku, E. R. / Ibrahim, I. D.	Utilization of Wastewater Sludge for Lightweight Concrete and the Use of Wastewater as Curing Medium	e00667
Rubens Cardoso da Silva, Micael / Salvi Malacarne, Camila / Longhi, Márlon Augusto / Kirchheim, Ana Paula	Valorization of kaolin mining waste from the Amazon region (Brazil) for the low-carbon cement production	e00756
Burghardt, Tomasz E. / Popp, Roman / Helmreich, Bernhard / Reiter, Thomas / Böhm, Gerald / Pitterle, Georg / Artmann, Matthäus	Visibility of various road markings for machine vision	e00579
Awoyera, Paul O. / Olalusi, Oladimeji B. / Ibia, Samuel / Prakash A., Krishna	Water absorption, strength and microscale properties of interlocking concrete blocks made with plastic fibre and ceramic aggregates	e00677

Informations
sur cette fiche
IssueID
58574
Publié(e) le:
15.05.2021
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Case Studies in Construction Materials - décembre 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Case Studies in Construction Materials - décembre 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.