Bulletin of Earthquake Engineering - v. 18, n. 8 (avril 2020)

Publié:	avril 2020

Auteur(s)	Titre	Page(s)
Kumar Adhikari, Rohit / d'Ayala, Dina	2015 Nepal earthquake: seismic performance and post-earthquake reconstruction of stone in mud mortar masonry buildings	3863-3896
Terenzi, Gloria / Costoli, Iacopo / Sorace, Stefano	Activation control extension of a design method of fluid viscous dissipative bracing systems	4017-4038
Grillanda, Nicola / Valente, Marco / Milani, Gabriele	ANUB-Aggregates: a fully automatic NURBS-based software for advanced local failure analyses of historical masonry aggregates	3935-3961
Bovo, M. / Barbaresi, A. / Torreggiani, D.	Definition of seismic performances and fragility curves of unanchored cylindrical steel legged tanks used in wine making and storage	3711-3745
Qiu, Canxing / Zhu, Songye	Enhance seismic performance of self-centering concentrically braced frames by using hybrid systems	3995-4015
Aninthaneni, P. K. / Dhakal, R. P. / Marshall, J. / Bothara, J.	Experimental investigation of "dry" jointed precast concrete frame sub-assemblies with steel angle and tube connections	3659-3681
Messali, F. / Esposito, R. / Ravenshorst, G. J. P. / Rots, J. G.	Experimental investigation of the in-plane cyclic behaviour of calcium silicate brick masonry walls	3963-3994
Zhang, Yufen / Jia, Hongxin / Li, Yanyan / Demoha, Krushar	Experiments on cyclic performance of external diaphragm joints between CFDST columns and steel beams	3843-3861
Lanzano, Giovanni / Luzi, Lucia / D'Amico, Vera / Pacor, Francesca / Meletti, Carlo / Marzocchi, Warner / Rotondi, Renata / Varini, Elisa	Ground motion models for the new seismic hazard model of Italy (MPS19): selection for active shallow crustal regions and subduction zones	3487-3516
Xiao, Yan / Ye, Kun / He, Wenfu	An improved response surface method for fragility analysis of base-isolated structures considering the correlation of seismic demands on structural components	4039-4059
Perrault, Matthieu / Guéguen, Philippe / Parra, Gastón / Sarango, Johanna	Modification of the data-driven period/height relationship for buildings located in seismic-prone regions such as Quito (Ecuador)	3545-3562
Sigfusdottir, A.	New insights from the Ölfus case study concerning the seismic performance of buried concrete wastewater pipes in the vicinity of a severe earthquake	3563-3601
Dashti, Farhad / Dhakal, Rajesh P. / Pampanin, Stefano	A parametric study on out-of-plane instability of doubly reinforced structural walls (Part I): FEM predictions	3747-3780
Zhou, Ying / Song, Ge / Huang, Wei	Performance-based damage evaluation of hybrid joints	3781-3816
Jahangiri, Vahid / Shakib, Hamzeh	Reliability-based seismic evaluation of buried pipelines subjected to earthquake-induced transient ground motions	3603-3627
Kucukgoncu, Hurmet / Altun, Fatih	The seismic behaviour of RC exterior shear walls used for strengthening of intact and damaged frames	3683-3709
Wu, Chenglong / Liu, Jiming / Shi, Wei	Seismic performance of composite joints between prefabricated steel-reinforced concrete columns and steel beams: experimental study	3817-3841
Gao, Zhidong / Zhao, Mi / Du, Xiuli / Zhao, Xu	Seismic soil–structure interaction analysis of structure with shallow foundation using response spectrum method	3517-3543
Ademović, Naida / Hadzima-Nyarko, Marijana / Zagora, Nermina	Seismic vulnerability assessment of masonry buildings in Banja Luka and Sarajevo (Bosnia and Herzegovina) using the macroseismic model	3897-3933
Somma, Fausto / Millen, Maxim / Bilotta, Emilio / Flora, Alessandro / Viana da Fonseca, António	Vulnerability assessment of RC buildings to lateral spreading	3629-3657

Auteur(s)

Titre

Page(s)

Kumar Adhikari, Rohit / d'Ayala, Dina

2015 Nepal earthquake: seismic performance and post-earthquake reconstruction of stone in mud mortar masonry buildings

3863-3896

Terenzi, Gloria / Costoli, Iacopo / Sorace, Stefano

Activation control extension of a design method of fluid viscous dissipative bracing systems

4017-4038

Grillanda, Nicola / Valente, Marco / Milani, Gabriele

ANUB-Aggregates: a fully automatic NURBS-based software for advanced local failure analyses of historical masonry aggregates

3935-3961