Bulletin of Earthquake Engineering - v. 17, n. 6 (avril 2019)

Publié:	avril 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Amarloo, Nader / Emami, Ali R.	A 3-dimensional perspective for inter-storey drift, ductility and damage distributions in plan-irregular RC buildings considering seismic orientation effect	3447-3474
Kowsari, Milad / Halldórsson, Benedikt / Hrafnkelsson, Birgir / Snæbjörnsson, Jónas Þór / Jónsson, Sigurjón	Calibration of ground motion models to Icelandic peak ground acceleration data using Bayesian Markov Chain Monte Carlo simulation	2841-2870
Wu, Hao / Zhou, Ying / Liu, Wenguang	Collapse fragility analysis of self-centering precast concrete walls with different post-tensioning and energy dissipation designs	3593-3613
El Jisr, Hammad / Elkady, Ahmed / Lignos, Dimitrios G.	Composite steel beam database for seismic design and performance assessment of composite-steel moment-resisting frame systems	3015-3039
Dell'Aglio, Giuseppe / Montuori, Rosario / Nastri, Elide / Piluso, Vincenzo	Consideration of second-order effects on plastic design of steel moment resisting frames	3041-3070
Dammala, Pradeep Kumar / Kumar, Shiv Shankar / Murali Krishna, A. / Bhattacharya, Subhamoy	Dynamic soil properties and liquefaction potential of northeast Indian soil for non-linear effective stress analysis	2899-2933
Lagomarsino, Sergio / Cattari, Serena / Ottonelli, Daria / Giovinazzi, Sonia	Earthquake damage assessment of masonry churches: proposal for rapid and detailed forms and derivation of empirical vulnerability curves	3327-3364
Aşıkoğlu, Abide / Avşar, Özgür / Lourenço, Paulo B. / Silva, Luís C.	Effectiveness of seismic retrofitting of a historical masonry structure: Kütahya Kurşunlu Mosque, Turkey	3365-3395
Baziar, Mohammad Hasan / Heidari Hasanaklou, Sajjad / Saeedi Azizkandi, Alireza	Evaluation of EPS wall effectiveness to mitigate shallow foundation deformation induced by reverse faulting	3095-3117
Sun, Limin / Xie, Wen	Experimental assessment of soil–structure interaction effects on a super long-span cable-stayed-bridge with pile group foundations	3169-3196
Butenweg, Christoph / Marinković, Marko / Salatic, Ratko	Experimental results of reinforced concrete frames with masonry infills under combined quasi-static in-plane and out-of-plane seismic loading	3397-3422
Xu, Long-He / Xie, Xing-Si / Yao, Shi-Qian / Li, Zhong-Xian	Hysteretic behavior and failure mechanism of an assembled self-centering brace	3573-3592
Tong, Jing-Zhong / Guo, Yan-Lin / Pan, Wen-Hao / Zhou, Peng / Wang, Meng-Zheng	Hysteretic performance of inverted-V patterned BRB systems considering vertical pre-compression effects	3197-3232
Dong, Huihui / Du, Xiuli / Han, Qiang / Bi, Kaiming / Hao, Hong	Hysteretic performance of RC double-column bridge piers with self-centering buckling-restrained braces	3255-3281
Wang, Xiao-Qiang / Xu, Li-Yan / Tao, Mu-Xuan	Influence of slab spatial composite effect on dynamic behaviour of composite frame structures under earthquake excitation	3071-3094
Pachla, Filip / Kowalska-Koczwara, Alicja / Tatara, Tadeusz / Stypuła, Krzysztof	The influence of vibration duration on the structure of irregular RC buildings	3119-3138
García-Fernández, Mariano / Gehl, Pierre / Jiménez, Maria-Jose / d'Ayala, Dina	Modelling Pan-European ground motions for seismic hazard applications	2821-2840
Gentile, Roberto / Pampanin, Stefano / Raffaele, Domenico / Uva, Giuseppina	Non-linear analysis of RC masonry-infilled frames using the SLaMA method: part 1—mechanical interpretation of the infill/frame interaction and formulation of the procedure	3283-3304
Gentile, Roberto / Pampanin, Stefano / Raffaele, Domenico / Uva, Giuseppina	Non-linear analysis of RC masonry-infilled frames using the SLaMA method: part 2—parametric analysis and validation of the procedure	3305-3326
Güneş, Necmettin / Ulucan, Zülfü Çınar	Nonlinear dynamic response of a tall building to near-fault pulse-like ground motions	2989-3013
Mazza, Fabio	A plastic-damage hysteretic model to reproduce strength stiffness degradation	3517-3544
Casagrande, Daniele / Doudak, Ghasan / Polastri, Andrea	A proposal for the capacity-design at wall- and building-level in light-frame and cross-laminated timber buildings	3139-3167
Kia, M. / Banazadeh, M. / Bayat, M.	Rapid seismic loss assessment using new probabilistic demand and consequence models	3545-3572
Chatterjee, Kaustav / Choudhury, Deepankar / Rao, Vansittee Dilli / Poulos, Harry G.	Seismic response of single piles in liquefiable soil considering P-delta effect	2935-2961
Mazza, Fabio / Mazza, Mirko	Seismic retrofitting of gravity-loads designed r.c. framed buildings combining CFRP and hysteretic damped braces	3423-3445
Tsioulou, Alexandra / Taflanidis, Alexandros A. / Galasso, Carmine	Validation of stochastic ground motion model modification by comparison to seismic demand of recorded ground motions	2871-2898
Gremer, Nadia / Adam, Christoph / Medina, Ricardo A. / Moschen, Lukas	Vertical peak floor accelerations of elastic moment-resisting steel frames	3233-3254
Raj, Dhiraj / Singh, Yogendra / Kaynia, Amir M.	V–H–M seismic capacity envelopes of strip foundations on slopes for capacity design of structure-foundation system	2963-2987

Informations
sur cette fiche
IssueID
28560
Publié(e) le:
28.06.2019
Modifié(e) le:
28.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Bulletin of Earthquake Engineering - v. 17, n. 6 (avril 2019)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Bulletin of Earthquake Engineering - v. 17, n. 6 (avril 2019)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.