Seismic Isolation and Response Control
(Principal Lecturer in Civil Engineering at the University of Brighton, United Kingdom)
(Post-Doctoral Research Associate, Institute of Structural Mechanics and Design (ISM+D), TU Darmstadt, Germany; Institute of Structural
Engineering (IKI) at BOKU University, Vienna, Austria)
Stephanos Dritsos (Emeritus Professor, Department of Civil Engineering, University of Patras, Greece)
Christos Giarlelis (Structural Engineer & co-founder, EQUIDAS Consulting Engineers; Adjunct lecturer, Department of Civil Engineering, University of West Attica)
José Jara (Titular Professor, Faculty of Civil Engineering, University of Michoacan, Mexico)
Fatih Sutcu (Assistant Professor and Program Coordinator, Faculty of Civil Engineering and Earthquake Engineering, Istanbul Technical University)
Toru Takeuchi (Professor, Department of Architecture and Building Engineering, Tokyo Institute of Technology (Tokyo Tech), Japan)
Joe White (Project Director and Business Manager, Holmes Consulting Group LP, The Netherlands)
|Editeur:||International Association for Bridge and Structural Engineering|
|Publié à:||Zurich, Suisse|
|Nombre total de pages (du PDF):||116|
|Collection:||Structural Engineering Documents (No. 19)|
|Couverture:||livre de poche|
The seismic resilience of new and existing structures is a key priority for the protection of human lives and the reduction of economic losses in earthquake prone areas. The modern seismic codes have focused on the upgrade of the structural performance of the new and existing structures. However, in many cases it is preferrable to mitigate the effects of the earthquakes by reducing the induced loads in the structures using seismic isolation and response control devices. The limited expertise in the selection and design of the appropriate system for new and existing structures is the main challenge for an extensive use of seismic isolation and response control systems in practice.
This document aims to provide a practical guide by presenting a collection of the most commonly used seismic isolation and response control systems and a critical evaluation of the main characteristics of these systems. Comparisons of the key parameters of the design processes for new buildings with seismic isolation are presented, while the application of seismic isolation systems and response control systems for the retrofitting of existing structures is also examined, followed by various case studies from Greece, Japan, Mexico, New Zealand, and Turkey.
Video Message from the Editor and Authors
|Copyright:||© 2021 International Association for Bridge and Structural Engineering|
Cette oeuvre ne peut être utilisée sans la permission de l'auteur ou détenteur des droits.