Yan Yao 
- (2023): The effects of surface modification by using phytic acid-based hybrid complexes on the interfacial properties of heat-treated wood. Dans: Construction and Building Materials, v. 403 (novembre 2023).
- (2023): Recommendation of RILEM TC 281-CCC: Test method to determine the effect of uniaxial compression load and uniaxial tension load on concrete carbonation depth. Dans: Materials and Structures, v. 56, n. 7 (10 août 2023).
- (2023): Report of RILEM TC 281-CCC: effect of loading on the carbonation performance of concrete with supplementary cementitious materials — an interlaboratory comparison of different test methods and related observations. Dans: Materials and Structures, v. 56, n. 6 (19 juin 2023).
- (2023): Design, fabrication and mechanical properties of a 3D re-entrant metastructure. Dans: Composite Structures, v. 314 (juin 2023).
- (2016): A microstructural analysis of isoprenol ether-based polycarboxylates and the impact of structural motifs on the dispersing effectiveness. Dans: Cement and Concrete Research, v. 84 (juin 2016).
- (2005): Influence of HCl corrosion on the mechanical properties of concrete. Dans: Cement and Concrete Research, v. 35, n. 3 (mars 2005).
- (2019): Critical chloride content in reinforced concrete — An updated review considering Chinese experience. Dans: Cement and Concrete Research, v. 117 (mars 2019).
- (2022): Influence of sustained compressive load on the carbonation of concrete containing blast furnace slag. Dans: Construction and Building Materials, v. 335 (juin 2022).
- (2022): Numerical modeling of the carbonation depth of meso-scale concrete under sustained loads considering stress state and damage. Dans: Construction and Building Materials, v. 340 (juillet 2022).
- (2019): A brief analysis of the power cable planning and design of the utility tunnel. Dans: Journal of Physics: Conference Series, v. 1314, n. 1 (1 octobre 2019).
- (2022): Effects of the combination of compression and impregnation with phenolic resin on the dimensional stability in the multiscale wood structure of Chinese fir. Dans: Construction and Building Materials, v. 327 (avril 2022).
- (2021): A modified numerical model for predicting carbonation depth of concrete with stress damage. Dans: Construction and Building Materials, v. 304 (octobre 2021).
- (2020): Effect of calcination and cooling conditions on mineral compositions and properties of high-magnesia and low-heat Portland cement clinker. Dans: Construction and Building Materials, v. 260 (novembre 2020).
- (2018): Synthesis, characterization and working mechanism of a novel polycarboxylate superplasticizer for concrete possessing reduced viscosity. Dans: Construction and Building Materials, v. 169 (avril 2018).
- (2017): The investigation of pH threshold value on the corrosion of steel reinforcement in concrete. Dans: Computers and Concrete, v. 19, n. 3 (mars 2017).
- (2019): Effects of seawater on mechanical properties, mineralogy and microstructure of calcium silicate slag-based alkali-activated materials. Dans: Construction and Building Materials, v. 212 (juillet 2019).
- (2019): Development of mathematical models for predicting the compressive strength and hydration process using the EIS impedance of cementitious materials. Dans: Construction and Building Materials, v. 208 (mai 2019).
- (2016): Effect of Water-Curing Time on the Mechanical Properties of Engineered Cementitious Composites. Dans: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 11 (novembre 2016).
- (2015): Electrical Resistivity of Cement Pastes Undergoing Cyclic Freeze-Thaw Action. Dans: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 1 (janvier 2015).
- (2016): Analysis of Crack Microstructure, Self-Healing Products, and Degree of Self-Healing in Engineered Cementitious Composites. Dans: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 6 (juin 2016).
- (2012): Incorporation superabsorbent polymer (SAP) particles as controlling pre-existing flaws to improve the performance of engineered cementitious composites (ECC). Dans: Construction and Building Materials, v. 28 (mars 2012).
- (2012): Autogenous self-healing of engineered cementitious composites under freeze–thaw cycles. Dans: Construction and Building Materials, v. 34 (septembre 2012).
- (2013): Characterizing blended cement pastes under cyclic freeze–thaw actions by electrical resistivity. Dans: Construction and Building Materials, v. 44 (juillet 2013).
- (2014): Corrosion of rebar in concrete under cyclic freeze–thaw and Chloride salt action. Dans: Construction and Building Materials, v. 53 (février 2014).
- (2014): Relative humidity and deterioration of concrete under freeze–thaw load. Dans: Construction and Building Materials, v. 62 (juillet 2014).
- (2014): Measurement and correlation of ductility and compressive strength for engineered cementitious composites (ECC) produced by binary and ternary systems of binder materials: Fly ash, slag, silica fume and cement. Dans: Construction and Building Materials, v. 68 (octobre 2014).
- (2016): Characterizing frost damages of concrete with flatbed scanner. Dans: Construction and Building Materials, v. 102 (janvier 2016).
- (2017): Electrochemical impedance spectroscopy (EIS) of hydration process and drying shrinkage for cement paste with W/C of 0.25 affected by high range water reducer. Dans: Construction and Building Materials, v. 131 (janvier 2017).
- (2014): Latex-modified Engineered Cementitious Composites (L-ECC). Dans: Journal of Advanced Concrete Technology, v. 12, n. 12 ( 2014).
- (2017): Recommendation of RILEM TC 246-TDC: test methods to determine durability of concrete under combined environmental actions and mechanical load. Test method to determine the effect of applied stress on chloride diffusion. Dans: Materials and Structures, v. 50, n. 2 (avril 2017).
Structurae coopère avec
