Lei Yang 
- : Modeling and designing of a phased array comprising piezoelectric stack transducer for ultrasonic Lamb wave-based damage detection. Dans: Structural Health Monitoring.
- : Multi-frequency probabilistic imaging fusion for impact localization on aircraft composite structures. Dans: Structural Health Monitoring.
- (2024): Pixel-wise crack defect segmentation with dual-encoder fusion network. Dans: Construction and Building Materials, v. 426 (mai 2024).
- (2024): The rainstorm waterlogging resistance of a novel fiber-reinforced self-compacting recycled pervious concrete after freeze-thaw cycles. Dans: Journal of Building Engineering, v. 86 (juin 2024).
- (2024): Recycled coarse aggregate from parent concrete with supplementary cementitious materials under freeze-thaw environment: Recyclability, environment and economic evaluation. Dans: Journal of Building Engineering, v. 84 (mai 2024).
- (2024): A novel water-swelling grouting material formulation and its performance for water rushing in karst strata. Dans: Construction and Building Materials, v. 416 (février 2024).
- (2024): Mechanical behavior, acoustic emission and principal strain field evolution properties of layered cemented paste backfill under unconfined compression. Dans: Construction and Building Materials, v. 415 (février 2024).
- (2023): Quasi-static cyclic tests and numerical study of seismic performance of confined masonry walls reinforced with horizontal steel bars. Dans: Structures, v. 57 (novembre 2023).
- (2023): Microwave hydrothermal synthesis of tobermorite for the solidification of iron. Dans: Case Studies in Construction Materials, v. 19 (décembre 2023).
- (2023): Multi-scale triple-attention network for pixelwise crack segmentation. Dans: Automation in Construction, v. 150 (juin 2023).
- (2023): Performance investigation of blast furnace slag based cemented paste backfill under low temperature and low atmospheric pressure. Dans: Construction and Building Materials, v. 363 (janvier 2023).
- (2023): Preventing the secondary salt deterioration in the repaired area of basal erosion of earthen sites based on capillary barrier effect. Dans: Construction and Building Materials, v. 366 (février 2023).
- (2022): Multi-impact performance of prestressed CFRP-strengthened RC beams using H-typed end anchors. Dans: Marine Structures, v. 85 (septembre 2022).
- (2021): Microwave curing cement-fly ash blended paste. Dans: Construction and Building Materials, v. 282 (mai 2021).
- (2021): Mix design and rheological properties of magnesium potassium phosphate cement composites based on the 3D printing extrusion system. Dans: Construction and Building Materials, v. 284 (mai 2021).
- (2022): Investigation of Fracture Performance and Interface Stress Behavior of Zn–Zn-Al Multilayer Coating–304 Stainless Steel Substrate System. Dans: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 3 (mars 2022).
- (2022): Microwave preparation and carbonation properties of low-carbon cement. Dans: Construction and Building Materials, v. 320 (février 2022).
- (2021): Investigation on the mechanical properties of CSA cement-based coating and its application. Dans: Construction and Building Materials, v. 305 (octobre 2021).
- (2021): Properties of composite cement-sodium silicate grout mixed with sulphoaluminate cement and slag powder in flowing water. Dans: Construction and Building Materials, v. 308 (novembre 2021).
- (2017): Integrated impedance and Lamb wave–based structural health monitoring strategy for long-term cycle-loaded composite structure. Dans: Structural Health Monitoring, v. 17, n. 4 (juillet 2017).
- (2020): Modification of Lime-Fly Ash-Crushed Stone with Phosphogypsum for Road Base. Dans: Advances in Civil Engineering, v. 2020 (janvier 2020).
- (2019): Research of an integrated cooling system consisted of compression refrigeration and pump-driven heat pipe for data centers. Dans: Energy and Buildings, v. 187 (mars 2019).
- (2020): Low-velocity impact behaviors of a fully thermoplastic composite laminate fabricated with an innovative acrylic resin. Dans: Composite Structures, v. 250 (octobre 2020).
- (2019): A new constitutive model for steel fibre reinforced concrete subjected to dynamic loads. Dans: Composite Structures, v. 221 (août 2019).
- (2020): Passive wireless sensors based on spark plasma sintering for ultra-high temperature measurements. Dans: Smart Materials and Structures, v. 29, n. 11 (septembre 2020).
- (2020): Reconstruction of full-field complex deformed shapes of thin-walled special-section beam structures based on in situ strain measurement. Dans: Advances in Structural Engineering, v. 23, n. 15 (juin 2020).
- (2020): Influence of water removal techniques on the composition and microstructure of hardened calcium sulfoaluminate cement pastes. Dans: Materials and Structures, v. 53, n. 4 (26 juin 2020).
- (2019): Prediction of dynamic increase factor for steel fibre reinforced concrete using a hybrid artificial intelligence model. Dans: Engineering Structures, v. 189 (juin 2019).
- (2013): Physical filling effect of aggregate micro fines in cement concrete. Dans: Construction and Building Materials, v. 41 (avril 2013).
- (2018): Influence of dry ice on the performance of Portland cement and its mechanism. Dans: Construction and Building Materials, v. 188 (novembre 2018).
Structurae coopère avec
