Ping Tan 
- (2024): Multi-performance oriented seismic design of viscoelastic dampers for structural retrofitting. Dans: Journal of Building Engineering, v. 86 (juin 2024).
- (2023): Mechanism study on the effect of floor rotation angle on supported tuned mass damper system of high-rise structure. Dans: Structures, v. 58 (décembre 2023).
- (2024): Prediction of nonlinear seismic demand of inter-story isolated systems using improved multi-modal pushover analysis procedures. Dans: Journal of Building Engineering, v. 82 (avril 2024).
- (2024): Optimal design of tuned inerter negative stiffness dampers with linear viscous and nonlinear eddy current damping for structural effective damping ratio enhancement. Dans: Soil Dynamics and Earthquake Engineering, v. 176 (janvier 2024).
- (2023): A novel tuned mass damper inerter: optimal design, effectiveness comparison, and robustness investigation. Dans: Structures, v. 55 (septembre 2023).
- (2023): Real-complex hybrid modal response spectrum method for seismically base-isolated structures. Dans: Structures, v. 55 (septembre 2023).
- (2023): Optimal design method of the load-level isolation system for industrial steel racking. Dans: Journal of Constructional Steel Research, v. 210 (novembre 2023).
- (2023): A novel tuned inerter eddy current damper: modeling, optimization, and evaluation. Dans: Engineering Structures, v. 285 (juin 2023).
- (2023): Multi-objective optimization of the inter-story isolation system used as a structural TMD. Dans: Bulletin of Earthquake Engineering, v. 21, n. 5 (février 2023).
- (2023): Numerical Investigations of Asymmetric Inerter Nonlinear Energy Sink for Vibration Control. Dans: International Journal of Structural Stability and Dynamics, v. 23, n. 13 (février 2023).
- (2022): Multi‐stage superelastic variable stiffness pendulum isolation system for seismic response control of bridges under near‐fault earthquakes. Dans: Structural Control and Health Monitoring, v. 29, n. 12 (5 octobre 2022).
- (2023): Relative stability analysis for robustness design of real-time hybrid simulation. Dans: Soil Dynamics and Earthquake Engineering, v. 165 (février 2023).
- (2023): Real-time hybrid testing for active mass driver system based on an improved control strategy against control-structure-interaction effects. Dans: Journal of Building Engineering, v. 63 (janvier 2023).
- (2022): Life cycle resilience assessment of RC frame structures considering multiple-hazard. Dans: Structures, v. 44 (octobre 2022).
- (2022): Numerical modeling and experimental validation of Sliding-LRBs considering hysteretic strength degradation. Dans: Engineering Structures, v. 262 (juillet 2022).
- (2022): Performance-Based Compositive Passive Control Analysis of Multi-Tower Building with Chassis: Optimization of Kelvin-Voigt Dampers. Dans: Buildings, v. 12, n. 2 (18 janvier 2022).
- (2022): Optimal design of tuned viscous mass damper for acceleration response control of civil structures under seismic excitations. Dans: Engineering Structures, v. 252 (février 2022).
- (2022): Performance of seismically isolated buildings with variable friction pendulum bearings under near-fault ground motions. Dans: Journal of Building Engineering, v. 45 (janvier 2022).
- (2021): Performance evaluation of multiple tuned inerter‐based dampers for seismic induced structural vibration control. Dans: Structural Control and Health Monitoring, v. 29, n. 1 (octobre 2021).
- (2021): A new nonlinear model to describe the degradation law of the mechanical properties of lead‐rubber bearings under high‐speed horizontal loading. Dans: Structural Control and Health Monitoring, v. 28, n. 12 (septembre 2021).
- (2021): Investigations on a mega–sub isolation system under near-fault ground motions. Dans: Advances in Structural Engineering, v. 24, n. 15 (juillet 2021).
- (2021): Optimal design of TVMD with linear and nonlinear viscous damping subjected to white‐noise excitation. Dans: Structural Control and Health Monitoring, v. 28, n. 4 (janvier 2021).
- (1999): Micromechanics models for the elastic constants and failure strengths of plain weave composites. Dans: Composite Structures, v. 47, n. 1-4 (décembre 1999).
- (2002): A one-dimensional model for non-linear behaviour of piezoelectric composite materials. Dans: Composite Structures, v. 58, n. 4 (décembre 2002).
- (2020): Performance-based dynamic optimal design for isolated structures with multiple-coupling friction dampers. Dans: Advances in Structural Engineering, v. 23, n. 10 (février 2020).
- (2020): Mechanical performance and shear constitutive model study of a new high-capacity polyurethane elastomeric bearing. Dans: Construction and Building Materials, v. 232 (janvier 2020).
- (2018): Recent progress and application on seismic isolation energy dissipation and control for structures in China. Dans: Earthquake Engineering and Engineering Vibration, v. 17, n. 1 (janvier 2018).
- (2019): Optimization of damped outrigger systems subject to stochastic excitation. Dans: Engineering Structures, v. 191 (juillet 2019).
- (2016): rate-dependent constitutive model of high damping rubber bearings: modeling and experimental verification. Dans: Earthquake Engineering and Structural Dynamics, v. 45, n. 11 (septembre 2016).
- (2018): novel energy dissipation outrigger system with rotational inertia damper. Dans: Advances in Structural Engineering, v. 21, n. 12 (mars 2018).
Structurae coopère avec
