Stefano Silvestri 
- (2023): Strength reduction curves for corroded seven‐wire strands. Dans: ce/papers, v. 6, n. 5 (septembre 2023).
- (2024): Shaking table tests of a full-scale base-isolated flat-bottom steel silo equipped with curved surface slider bearings. Dans: Soil Dynamics and Earthquake Engineering, v. 176 (janvier 2024).
- (2022): Quasi-static cyclic tests on a half-scaled two-storey steel frame equipped with Crescent Shaped Braces at both storeys: Experimental vs. numerical response. Dans: Journal of Building Engineering, v. 62 (décembre 2022).
- (2022): Shaking table tests of a full‐scale flat‐bottom manufactured steel silo filled with wheat: Main results on the fixed‐base configuration. Dans: Earthquake Engineering and Structural Dynamics, v. 51, n. 1 (janvier 2022).
- (2021): Seismic Design and Performances of Frame Structures Connected to a Strongback System and Equipped with Different Configurations of Supplemental Viscous Dampers. Dans: Frontiers in Built Environment, v. 7 (janvier 2021).
- (2021): Shaking table testing of groin vaults made by 3D printers. Dans: Soil Dynamics and Earthquake Engineering, v. 150 (novembre 2021).
- (2021): Rubble Stone Masonry Buildings with Cement Mortar: Base Shear Seismic Demand Comparison for Selected Countries Worldwide. Dans: Frontiers in Built Environment, v. 7 (janvier 2021).
- (2021): Quasi-static cyclic tests on a half-scaled two-storey steel frame equipped with Crescent Shaped Braces. Dans: Engineering Structures, v. 232 (avril 2021).
- (2020): Rubble Stone Masonry Buildings With Cement Mortar: Design Specifications in Seismic and Masonry Codes Worldwide. Dans: Frontiers in Built Environment, v. 6 (janvier 2020).
- (2019): Seismic Behavior of One-Storey Gabion-Box Walls Buildings. Dans: Frontiers in Built Environment, v. 4 (février 2019).
- (2011): Seismic design of a precast r.c. structure equipped with viscous dampers. Dans: Earthquakes and Structures, v. 2, n. 3 (septembre 2011).
- (2011): A Special Solution for Lateral-Resisting Systems Capable of Multiple Seismic Performances. Présenté pendant: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011.
- (2017): On the peak inter-storey drift and peak inter-storey velocity profiles for frame structures. Dans: Soil Dynamics and Earthquake Engineering, v. 94 (mars 2017).
- (2016): Stochastic-based damping reduction factors. Dans: Soil Dynamics and Earthquake Engineering, v. 80 (janvier 2016).
- (2007): Physical and Numerical Approaches for the Optimal Insertion of Seismic Viscous Dampers in Shear-Type Structures. Dans: Journal of Earthquake Engineering, v. 11, n. 5 ( 2007).
- (2008): Numerical Verification of the Effectiveness of the "Alpha" Method for the Estimation of the Maximum Rotational Elastic Response of Eccentric Systems. Dans: Journal of Earthquake Engineering, v. 12, n. 2 ( 2008).
- (2018): Performance-based seismic design of multistory frame structures equipped with crescent-shaped brace. Dans: Structural Control and Health Monitoring, v. 25, n. 2 (février 2018).
- (2016): Shaking-table tests of flat-bottom circular silos containing grain-like material. Dans: Earthquake Engineering and Structural Dynamics, v. 45, n. 1 (janvier 2016).
- (2013): Results of pseudo-static tests with cyclic horizontal load on cast in situ sandwich squat concrete walls. Dans: Engineering Structures, v. 54 (septembre 2013).
- (2014): Multi-performance seismic design through an enhanced first-storey isolation system. Dans: Engineering Structures, v. 59 (février 2014).
- (2013): Physically-based prediction of the maximum corner displacement magnification of one-storey eccentric systems. Dans: Bulletin of Earthquake Engineering, v. 11, n. 5 (mars 2013).
- (2012): On the evaluation of the horizontal forces produced by grain-like material inside silos during earthquakes. Dans: Bulletin of Earthquake Engineering, v. 10, n. 5 (mai 2012).
- (2015): Peak velocities estimation for a direct five-step design procedure of inter-storey viscous dampers. Dans: Bulletin of Earthquake Engineering, v. 14, n. 2 (octobre 2015).
- (2013): On the dimensioning of viscous dampers for the mitigation of the earthquake-induced effects in moment-resisting frame structures. Dans: Bulletin of Earthquake Engineering, v. 11, n. 6 (juin 2013).
- (2015): Seismic Modal Contribution Factors. Dans: Bulletin of Earthquake Engineering, v. 13, n. 10 (avril 2015).
- (2014): Preliminary interpretation of shaking-table response of a full-scale 3-storey building composed of thin reinforced concrete sandwich walls. Dans: Engineering Structures, v. 76 (octobre 2014).
- (2014): A statistical study on the peak ground parameters and amplification factors for an updated design displacement spectrum and a criterion for the selection of recorded ground motions. Dans: Engineering Structures, v. 76 (octobre 2014).
- (2015): Refinements to the Silvestri's theory for the evaluation of the seismic actions in flat-bottom silos containing grain-like material. Dans: Bulletin of Earthquake Engineering, v. 13, n. 11 (mai 2015).
- (2016): Seismic horizontal forces exerted by granular material on flat bottom silos: experimental and analytical results. Présenté pendant: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
- (2010): Stiffness-Strength-Ductility Design Approach: an application to a five-storey steel building structure. Présenté pendant: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
Structurae coopère avec
