Caijun Shi 
- : Influence of fiber shapes on the compressive behaviors of ultra-high performance concrete containing coarse aggregate. Dans: Journal of Building Engineering.
- (2024): Influence of high performance cementitious materials coating on the mechanical performance and freeze-thaw resistance of the rubberized concrete. Dans: Construction and Building Materials, v. 452 (novembre 2024).
- (2024): Evaluation of tensile failure behavior of ultra high performance concrete under double-edge wedge splitting and direct tension loadings. Dans: Journal of Building Engineering, v. 90 (août 2024).
- (2024): Further hydration hardening behavior of CO2-cured sodium-doped calcium silicate compacts. Dans: Case Studies in Construction Materials, v. 20 (juillet 2024).
- (2024): Evaluation on steel corrosion risk of seawater sea sand concrete with low water-to-binder ratio by electrochemical measurement. Dans: Construction and Building Materials, v. 417 (février 2024).
- (2024): The influence of chlorides on corrosion behavior of carbon steel in slag-based geopolymer pore solution. Dans: Journal of Building Engineering, v. 85 (mai 2024).
- (2023): Enhancing the hardening properties and microstructure of magnesium slag blocks by carbonation-hydration sequential curing. Dans: Journal of Building Engineering, v. 76 (octobre 2023).
- (2023): Enhancing the carbonation of γ-C2S through MgCl2 incorporation. Dans: Construction and Building Materials, v. 409 (décembre 2023).
- (2024): Experimental and analytical studies on residual flexural behaviour of reinforced alkali-activated slag-based concrete beams after exposure to fire. Dans: Engineering Structures, v. 298 (janvier 2024).
- (2020): Experimental investigation and prediction of elastic modulus of ultra-high performance concrete (UHPC) based on its composition. Dans: Cement and Concrete Research, v. 138 (décembre 2020).
- (2022): Hydration-hardening properties of low-clinker composite cement incorporating carbonated waste sintering red mud and metakaolin. Dans: Construction and Building Materials, v. 354 (novembre 2022).
- (2023): Estimation of Magnetic Force between Micrometer-Sized Fly-Ash Particles in Cementitious Suspensions. Dans: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 2 (février 2023).
- (2022): Experimental study on creep of short performance-based alkali-activated concrete column. Dans: Journal of Building Engineering, v. 60 (novembre 2022).
- (2022): Impact of micro characteristics on the formation of high-strength Class F fly ash-based geopolymers cured at ambient conditions. Dans: Construction and Building Materials, v. 352 (octobre 2022).
- (2021): Flow behavior of cementitious-like suspension with nano-Fe3O4 particles under external magnetic field. Dans: Materials and Structures, v. 54, n. 6 (20 novembre 2021).
- (2021): Experimental study and analytical modeling on tensile performance of basalt textile reinforced concrete. Dans: Construction and Building Materials, v. 267 (janvier 2021).
- (2021): Factors affecting the effectiveness of internal curing: A review. Dans: Construction and Building Materials, v. 267 (janvier 2021).
- (2021): Flexural behavior of alkali-activated slag-based concrete beams. Dans: Engineering Structures, v. 229 (février 2021).
- (2020): Expansion behavior and microstructure change of alkali-activated slag grouting material in carbonate environment. Dans: Construction and Building Materials, v. 262 (novembre 2020).
- (2020): Expansion behavior and microstructure change of alkali-activated slag grouting material in sulfate environment. Dans: Construction and Building Materials, v. 260 (novembre 2020).
- (2020): Flexural Performance of Basalt Textile-Reinforced Concrete with Pretension and Short Fibers. Dans: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 3 (mars 2020).
- (2018): Improvement of properties of architectural mortars prepared with 100% recycled glass by CO2 curing. Dans: Construction and Building Materials, v. 179 (août 2018).
- (2018): Impact response of basalt textile reinforced concrete subjected to different velocities and temperatures. Dans: Construction and Building Materials, v. 175 (juin 2018).
- (2018): Flexural response of basalt textile reinforced concrete with pre-tension and short fibers under low-velocity impact loads. Dans: Construction and Building Materials, v. 169 (avril 2018).
- (2019): A feasible method for measuring the buildability of fresh 3D printing mortar. Dans: Construction and Building Materials, v. 227 (décembre 2019).
- (2019): Impact of different climates on the resistance of concrete to natural carbonation. Dans: Construction and Building Materials, v. 216 (août 2019).
- (2016): Factorial Design Method for Designing Ternary Composite Cements to Mitigate ASR Expansion. Dans: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 9 (septembre 2016).
- (2016): Influence of Nanolimestone on the Hydration, Mechanical Strength, and Autogenous Shrinkage of Ultrahigh-Performance Concrete. Dans: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 1 (janvier 2016).
- (2014): Experimental study on CO2 curing for enhancement of recycled aggregate properties. Dans: Construction and Building Materials, v. 67 (septembre 2014).
- (2015): Influence of carbonated recycled concrete aggregate on properties of cement mortar. Dans: Construction and Building Materials, v. 98 (novembre 2015).
Structurae coopère avec
