Łukasz Sadowski 
- (2023): Analysis of the Mechanical Performance of High-Strength Nano-Modified Cement Mortars for Overlays. Dans: Buildings, v. 14, n. 1 (31 décembre 2023).
- (2023): Effect of Nitrogen-Doped Graphene on the Hydration, Mechanical, and Microstructural Properties of Cement Pastes. Dans: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 10 (octobre 2023).
- (2023): Experimental study on self-compacting concrete-filled steel tube samples containing shrinkage-controlling admixtures. Dans: Journal of Building Engineering, v. 70 (juillet 2023).
- (2023): An Innovative Way to Repair Damaged Concrete Floors Using Epoxy Adhesives: A Case Study of Its Technical Assessment and Renovation. Dans: Practice Periodical on Structural Design and Construction, v. 28, n. 2 (mai 2023).
- (2023): Fundamental understanding of the mechanical and post- cracking behaviour of ultra-high performance mortar with recycled steel fibers. Dans: Construction and Building Materials, v. 374 (avril 2023).
- (2023): The influence of granite powder waste and the addition of fly ash on concrete bleeding. Dans: Structural Concrete, v. 24, n. 3 (avril 2023).
- (2022): Large Panel System Technology in the Second Half of the Twentieth Century—Literature Review, Recycling Possibilities and Research Gaps. Dans: Buildings, v. 12, n. 11 (27 octobre 2022).
- (2022): Comparative analysis of soft computing techniques in predicting the compressive and tensile strength of seashell containing concrete. Dans: European Journal of Environmental and Civil Engineering, v. 27, n. 5 (août 2022).
- (2022): The effect of silica fume on the washout resistance of environmentally friendly underwater concrete with a high-volume of siliceous fly ash. Dans: Construction and Building Materials, v. 327 (avril 2022).
- (2022): Microstructural, chemical and physical characterisation of the Shot-Earth 772. Dans: Construction and Building Materials, v. 341 (juillet 2022).
- (2022): Morphological properties of the cement skin: Understanding the effect of contact with formwork. Dans: Case Studies in Construction Materials, v. 16 (juin 2022).
- (2021): Evaluation of interlayer bonding in layered composites based on non-destructive measurements and machine learning: Comparative analysis of selected learning algorithms. Dans: Automation in Construction, v. 132 (décembre 2021).
- (2021): Engineering of green cementitious composites modified with siliceous fly ash: Understanding the importance of curing conditions. Dans: Construction and Building Materials, v. 313 (décembre 2021).
- (2021): Enhanced adhesive performance of epoxy resin coating by a novel bonding agent. Dans: Construction and Building Materials, v. 301 (septembre 2021).
- (2021): An intelligent model for the prediction of the depth of the wear of cementitious composite modified with high-calcium fly ash. Dans: Composite Structures, v. 259 (mars 2021).
- (2020): Microstructural and mechanical assessment of the causes of failure of floors made of polyurethane-cement composites. Dans: Composite Structures, v. 238 (avril 2020).
- (2020): The influence of the addition of tetragonal crystalline titanium oxide nanoparticles on the adhesive and functional properties of layered cementitious composites. Dans: Composite Structures, v. 233 (février 2020).
- (2020): Compressive behaviour of concrete-filled carbon fiber-reinforced polymer steel composite tube columns made of high performance concrete. Dans: Composite Structures, v. 234 (février 2020).
- (2014): New Nondestructive Way of Identifying the Values of Pull-off Adhesion Between Concrete Layers in Floors. Dans: Journal of Civil Engineering and Management, v. 20, n. 4 (juillet 2014).
- (2013): Methodology of Nondestructive Identification of Defective Concrete Zones in Unilaterally Accessible Massive Members. Dans: Journal of Civil Engineering and Management, v. 19, n. 6 (décembre 2013).
- (2013): Non-destructive Evaluation of the Pull-off Adhesion of Concrete Floor Layers Using Rbf Neural Network. Dans: Journal of Civil Engineering and Management, v. 19, n. 4 (septembre 2013).
- (2019): A method of the neural identification of the moisture content in brick walls of historic buildings on the basis of non-destructive tests. Dans: Automation in Construction, v. 106 (octobre 2019).
- (2019): Micromechanical properties within the interphase between heterogeneous layers made of cementitious composites. Dans: Construction and Building Materials, v. 215 (août 2019).
- (2019): Effect of Selected Nanospheres on the Mechanical Strength of Lime-Stabilized High-Plasticity Clay Soils. Dans: Advances in Civil Engineering, v. 2019 ( 2019).
- (2016): Multi-scale metrology of concrete surface morphology: Fundamentals and specificity. Dans: Construction and Building Materials, v. 113 (juin 2016).
- (2016): Non-destructive neural identification of the moisture content of saline ceramic bricks. Dans: Construction and Building Materials, v. 113 (juin 2016).
- (2016): Non-destructive neural identification of the bond between concrete layers in existing elements. Dans: Construction and Building Materials, v. 127 (novembre 2016).
- (2017): Morphogenesis in solidification phases of lightweight concrete surface at early ages. Dans: Construction and Building Materials, v. 148 (septembre 2017).
- (2017): The effect of the porosity within the interfacial zone between layers on pull-off adhesion. Dans: Construction and Building Materials, v. 152 (octobre 2017).
- (2015): Non-destructive identification of pull-off adhesion between concrete layers. Dans: Automation in Construction, v. 57 (septembre 2015).
Structurae coopère avec
