Giorgio Monti 
- (2024): Effectiveness of Vibration-Based Techniques for Damage Localization and Lifetime Prediction in Structural Health Monitoring of Bridges: A Comprehensive Review. Dans: Buildings, v. 14, n. 4 (27 mars 2024).
- (2024): Fragility curves of hollow-core bridge piers for territorial risk studies using closed-form equations. Dans: Structures, v. 61 (mars 2024).
- (2024): Direct displacement-based design of dissipative bracings for seismic retrofit of reinforced concrete buildings. Dans: Journal of Building Engineering, v. 82 (avril 2024).
- (2023): Experimental characterization and empirical strength prediction of Pakistani brick masonry walls. Dans: Journal of Building Engineering, v. 71 (juillet 2023).
- (2023): Cyclic response of infilled RC frames with window and door openings: Experimental results and damage interpretation. Dans: Earthquake Engineering and Structural Dynamics, v. 53, n. 1 (28 octobre 2023).
- (2023): Composite action in Shallow Steel-beam-Concrete Composite decks. Dans: Engineering Structures, v. 286 (juillet 2023).
- (2001): Circular RC Sections Confined with FRP: Modeling and Design. Présenté pendant: 2001 Structures Congress and Exposition, Washington, D.C., May 21-23, 2001.
- (2022): Effects of Openings and Axial Load Ratio on the Lateral Capacity of Steel-Fiber-Reinforced Concrete Shear Walls. Dans: Buildings, v. 12, n. 11 (27 octobre 2022).
- (2001): Externally bonded FRP reinforcement for RC structures. fédération internationale du béton (fib), Lausanne (Suisse).
- (2021): Advanced Methods for Structural Rehabilitation. Dans: Buildings, v. 12, n. 1 (21 décembre 2021).
- (2021): Energy-based method to design hysteretic bracings for the seismic rehabilitation of low-to-medium rise RC frames. Dans: Bulletin of Earthquake Engineering, v. 20, n. 1 (novembre 2021).
- (2021): Effects of Infills in the Seismic Performance of an RC Factory Building in Pakistan. Dans: Buildings, v. 11, n. 7 (30 juin 2021).
- (2021): Advanced Multi-Body Modelling of DCCSS Isolators: Geometrical Compatibility and Kinematics. Dans: Buildings, v. 11, n. 2 (20 janvier 2021).
- (2020): Design Embedment Strength of Plybamboo Panels Used for GluBam. Dans: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 5 (mai 2020).
- (2020): Dissipation in sheathing-to-framing connections of light-frame timber shear walls under seismic loads. Dans: Engineering Structures, v. 208 (avril 2020).
- (2016): Effectiveness of design procedures for linear TMD installed on inelastic structures under pulse-like ground motion. Dans: Earthquakes and Structures, v. 10, n. 1 (janvier 2016).
- (1999): FRP-Confined Concrete Model. Dans: Journal of Composites for Construction, v. 3, n. 3 (août 1999).
- (2016): Experimental Study on Dynamic Behavior of CFRP-to-Concrete Interface. Dans: Journal of Composites for Construction, v. 20, n. 5 (octobre 2016).
- (2001): Design of FRP Jackets for Upgrade of Circular Bridge Piers. Dans: Journal of Composites for Construction, v. 5, n. 2 (mai 2001).
- (2014): Bending Stiffness of Truss-Reinforced Steel-Concrete Composite Beams. Dans: Open Journal of Civil Engineering, v. 4, n. 3 ( 2014).
- (2016): Evolutionary Polynomial Regression–Based Statistical Determination of the Shear Capacity Equation for Reinforced Concrete Beams without Stirrups. Dans: Journal of Computing in Civil Engineering, v. 30, n. 1 (janvier 2016).
- (2009): Design by testing: A procedure for the statistical determination of capacity models. Dans: Construction and Building Materials, v. 23, n. 4 (avril 2009).
- (2016): Analytical thermo-mechanics 3D model of friction pendulum bearings. Dans: Earthquake Engineering and Structural Dynamics, v. 45, n. 6 (mai 2016).
- (2016): Design and Analysis of Cross Vaults Along History. Dans: International Journal of Architectural Heritage, v. 10, n. 7 (mars 2016).
- (2017): Assessment and Improvement of the Seismic Safety of the "Bastione Farnesiano", in the Central Archeological Area of Rome: A Calculation Method Between Need to Preserve and Uncertainties. Dans: International Journal of Architectural Heritage, v. 11, n. 2 ( 2017).
- (2016): Energy harvesting from electrospun piezoelectric nanofibers for structural health monitoring of a cable-stayed bridge. Dans: Smart Materials and Structures, v. 25, n. 8 (août 2016).
- (1997): Finite Element for Anchored Bars under Cyclic Load Reversals. Dans: Journal of Structural Engineering (ASCE), v. 123, n. 5 (mai 1997).
- (2009): Bond Model of NSM-FRP Strips in the Context of the Shear Strengthening of RC Beams. Dans: Journal of Structural Engineering (ASCE), v. 135, n. 6 (juin 2009).
- (2011): Comparison of different optimum criteria for sensor placement in lattice towers. Dans: The Structural Design of Tall and Special Buildings, v. 20, n. 8 (novembre 2011).
- (2016): Background to the European seismic design provisions for retrofitting RC elements using FRP materials. Dans: Structural Concrete, v. 17, n. 2 (avril 2016).
Structurae coopère avec
