Fei Li 
- (2024): Turbulent transport mechanism in the roughness sublayers over idealized urban areas and its implication to street-level ventilation. Dans: Sustainable Cities and Society, v. 100 (janvier 2024).
- (2023): Stress-induced collapse in horizontally layered rock and a yielding support strategy: A case study. Dans: Tunnelling and Underground Space Technology, v. 142 (décembre 2023).
- (2023): Multi-scale analysis method for composite-metal hybrid truss nodes using the MPC-submodel approach. Dans: Structures, v. 58 (décembre 2023).
- (2023): Machine learning and remote sensing integration for leveraging urban sustainability: A review and framework. Dans: Sustainable Cities and Society, v. 96 (septembre 2023).
- (2022): Load distribution of composite pre-tightened teeth connections embedded with soft layers. Dans: Composite Structures, v. 300 (novembre 2022).
- (2022): Study of the Convective Heat Transfer Coefficient of Different Building Envelope Exterior Surfaces. Dans: Buildings, v. 12, n. 6 (7 juin 2022).
- (2022): Study on the cooling performance of a radiative cooling-based ventilated roof for its application in buildings. Dans: Building Services Engineering Research and Technology, v. 43, n. 6 (août 2022).
- (2022): Locating a time-varying contaminant source in naturally ventilated indoor environments: An experimental study to find effective multi-robot olfaction methods. Dans: Building and Environment, v. 216 (mai 2022).
- (2022): Reconstruction of airflow path parameters in multizone models based on Bayesian inference and measured data. Dans: Building and Environment, v. 209 (février 2022).
- (2022): Theoretical evaluation of the equivalent torsional rigidity of a unique GFRP-metal box-truss composite girder. Dans: Structures, v. 36 (février 2022).
- (2021): Temperature-dependent mechanical properties of polyetherimide composites reinforced by graphene oxide-coated short carbon fibers. Dans: Composite Structures, v. 270 (août 2021).
- (2021): Performance evaluation of make-up air systems for pollutant removal from gas stove in residential kitchen by using a push-pull ventilation system. Dans: Energy and Buildings, v. 240 (juin 2021).
- (2018): Synthesis of Ferrate(VI) in Two Cathodes and One Anode Cell: Enhanced Efficiency and Treatment of Thiocyanate in Wastewater. Dans: Journal of Environmental Engineering (ASCE), v. 144, n. 10 (octobre 2018).
- (2021): Research on the Algorithm for Composite Lining of Deep Buried Water Conveyance Tunnel. Dans: Advances in Civil Engineering, v. 2021 (janvier 2021).
- (2016): Window purifying ventilator using a cross-flow fan: Simulation and optimization. Dans: Building Simulation, v. 9, n. 4 (avril 2016).
- (2018): Locating time-varying contaminant sources in 3D indoor environments with three typical ventilation systems using a multi-robot active olfaction method. Dans: Building Simulation, v. 11, n. 3 (mars 2018).
- (2019): A numerical investigation on the mixing factor and particle deposition velocity for enclosed spaces under natural ventilation. Dans: Building Simulation, v. 12, n. 3 (mars 2019).
- (2020): Solutions to mitigate the impact of measurement noise on the air pollution source strength estimation in a multi-zone building. Dans: Building Simulation, v. 13, n. 6 (août 2020).
- (2020): Sub-ambient radiative cooling and its application in buildings. Dans: Building Simulation, v. 13, n. 6 (août 2020).
- (2015): Measuring and containing longitudinal flow: Important for airborne pollutants control in an aircraft cabin. Dans: Science and Technology for the Built Environment, v. 21, n. 8 (novembre 2015).
- (2019): Non-intrusive measurement method for the window opening behavior. Dans: Energy and Buildings, v. 197 (août 2019).
- (2016): A prediction method of the failure load and failure mode for composite pre-tightened tooth connections based on the characteristic lengths. Dans: Composite Structures, v. 154 (octobre 2016).
- (2010): Prediction of tensile capacity based on cohesive zone model of bond anchorage for fiber-reinforce dpolymer tendon. Dans: Composite Structures, v. 92, n. 10 (septembre 2010).
- (2020): Seismic Behavior and Finite Element Analysis of Reinforced Concrete Short Columns Impacted by Oblique Earthquakes. Dans: Advances in Civil Engineering, v. 2020 (janvier 2020).
- (2019): Towards locating time-varying indoor particle sources: Development of two multi-robot olfaction methods based on whale optimization algorithm. Dans: Building and Environment, v. 166 (décembre 2019).
- (2019): Source localization in dynamic indoor environments with natural ventilation: An experimental study of a particle swarm optimization-based multi-robot olfaction method. Dans: Building and Environment, v. 161 (août 2019).
- (2018): Predicting contaminant dispersion using modified turbulent Schmidt numbers from different vortex structures. Dans: Building and Environment, v. 130 (février 2018).
- (2017): Ventilation similarity of an aircraft cabin mockup with a real MD-82 commercial airliner. Dans: Building and Environment, v. 111 (janvier 2017).
- (2019): Strength Prediction of a Single Tooth Bound to Composite Pre-tightened Tooth Connection (PTTC) Joints based on Different Failure Criteria. Dans: KSCE Journal of Civil Engineering, v. 23, n. 8 (juillet 2019).
- (2017): A novel fast model predictive control with actuator saturation for large-scale structures. Dans: Computers & Structures, v. 187 (15 juillet 2017).
Structurae coopère avec
