Han-Seung Lee
- (2023): Full-scale Field Test Extraction of Natural Frequency and Acceleration of Bridge using Modal Test and Operational Modal Analysis. Dans: IOP Conference Series: Earth and Environmental Science, v. 1135, n. 1 (1 janvier 2023).
- (2012): An Experimental Study on the Thermal Performance of Cement Mortar with Granulated PCM. Dans: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 12, n. 5 (octobre 2012).
- (2011): Evaluation of Pumping Characteristics of High Strength Concrete using Continuous Pumping System. Dans: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 11, n. 4 (août 2011).
- (2023): Compressive strength prediction of ternary-blended concrete using deep neural network with tuned hyperparameters. Dans: Journal of Building Engineering, v. 75 (septembre 2023).
- (2023): Chloride threshold determination of hybrid inhibitor immersed in simulated concrete pore solution. Dans: Construction and Building Materials, v. 384 (juin 2023).
- (2023): Influence of phosphate ions on passive film formation in amino acid-containing concrete pore solutions with chloride ions. Dans: Journal of Building Engineering, v. 66 (mai 2023).
- (2023): Corrosion prevention of steel rebar embedded in the cement mortar under accelerated conditions: Combined effects of phosphate and chloride ions. Dans: Construction and Building Materials, v. 365 (février 2023).
- (2022): Evaluation of light transmittance performance of light-transmitting concrete with optical fibre. Dans: Construction and Building Materials, v. 351 (octobre 2022).
- (2022): Effect of silicate-modified calcium oxide-based expansive agent on engineering properties and self-healing of ultra-high-strength concrete. Dans: Journal of Building Engineering, v. 50 (juin 2022).
- (2021): Hydration Model and Evaluation of the Properties of Calcined Hwangtoh Binary Blends. Dans: International Journal of Concrete Structures and Materials, v. 15, n. 1 (7 janvier 2021).
- (2020): Evaluation of carbonation progress using AIJ model, FEM analysis, and machine learning algorithms. Dans: Construction and Building Materials, v. 259 (octobre 2020).
- (2021): Experimental studies on hydration–strength–durability of limestone-cement-calcined Hwangtoh clay ternary composite. Dans: Construction and Building Materials, v. 269 (février 2021).
- (2018): Corrosion mitigation of steel rebars in chloride contaminated concrete pore solution using inhibitor: An electrochemical investigation. Dans: Construction and Building Materials, v. 173 (juin 2018).
- (2018): Extraction of chloride from chloride contaminated concrete through electrochemical method using different anodes. Dans: Construction and Building Materials, v. 158 (janvier 2018).
- (2008): Analysis on IBEM for consideration on reinforced concrete slab resistance. Dans: Computers and Concrete, v. 5, n. 6 (décembre 2008).
- (2007): IBEM analyses on half-cell potential measurement for NDE of rebar corrosion. Dans: Computers and Concrete, v. 4, n. 4 (août 2007).
- (2019): Effect of global warming on the proportional design of low CO2 slag-blended concrete. Dans: Construction and Building Materials, v. 225 (novembre 2019).
- (2011): Evaluation of Properties of Concrete Incorporating Fly Ash or Slag Using a Hydration Model. Dans: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 7 (juillet 2011).
- (2007): Evaluation on the effect of lithium nitrite corrosion inhibitor by the corrosion sensors embedded in mortar. Dans: Construction and Building Materials, v. 21, n. 1 (janvier 2007).
- (2011): An analytical study on the water penetration and diffusion into concrete under water pressure. Dans: Construction and Building Materials, v. 25, n. 1 (janvier 2011).
- (2012): Evaluation of the mechanical properties of concrete considering the effects of temperature and aging. Dans: Construction and Building Materials, v. 29 (avril 2012).
- (2014): Experimental study on the development of compressive strength of early concrete age using calcium-based hardening accelerator and high early strength cement. Dans: Construction and Building Materials, v. 64 (août 2014).
- (2015): Evaluation of effectiveness of methyl methacrylate as retarder additive in polymer concrete. Dans: Construction and Building Materials, v. 93 (septembre 2015).
- (2016): Evaluation of corrosion resistance properties of N, N′-Dimethyl ethanolamine corrosion inhibitor in saturated Ca(OH) 2 solution with different concentrations of chloride ions by electrochemical experiments. Dans: Construction and Building Materials, v. 114 (juillet 2016).
- (2017): Effect of LiNO 2 inhibitor on corrosion characteristics of steel rebar in saturated Ca(OH) 2 solution containing NaCl: An electrochemical study. Dans: Construction and Building Materials, v. 133 (février 2017).
- (2017): Experimental research on development of heated form incorporating exothermic reaction powder to protect concrete in cold weather. Dans: Construction and Building Materials, v. 135 (mars 2017).
- (2017): A highly sensitive ultrathin-film iron corrosion sensor encapsulated by an anion exchange membrane embedded in mortar. Dans: Construction and Building Materials, v. 156 (décembre 2017).
- (2017): Experimental study on shear performance of plain construction joints integrated with ultra-high performance concrete (UHPC). Dans: Construction and Building Materials, v. 152 (octobre 2017).
- (2014): Curing Management of Early-age Concrete at Construction Site using Integrated Wireless Sensors. Dans: Journal of Advanced Concrete Technology, v. 12, n. 3 ( 2014).
- (2015): Evaluation of CO2 emission–absorption of fly-ash-blended concrete structures using cement-hydration-based carbonation model. Dans: Materials and Structures, v. 48, n. 12 (décembre 2015).
Structurae coopère avec
