Pedro Lastra-González 
- (2024): Multi-criteria analysis of porous asphalt mixtures with aramid fiber under adverse conditions. Dans: Construction and Building Materials, v. 429 (mai 2024).
- (2024): Design and validation of a new asphalt mixture to reduce road traffic noise pollution in urban areas. Dans: Case Studies in Construction Materials, v. 20 (juillet 2024).
- (2024): Healing by magnetic induction of a novel cold pavement with asphalt emulsion and industrial by-products.. Dans: Developments in the Built Environment, v. 18 (avril 2024).
- (2024): Evaluation of the mechanical performance of AC mixtures with recycled fibres.. Dans: Developments in the Built Environment, v. 18 (avril 2024).
- (2024): An end-to-end computer vision system based on deep learning for pavement distress detection and quantification. Dans: Construction and Building Materials, v. 416 (février 2024).
- (2023): Development of improved porous asphalt mixtures with high porosity levels. Dans: Developments in the Built Environment, v. 16 (décembre 2023).
- (2023): Rheological and mechanical consequences of reducing the curing time of cold asphalt mixtures by means of magnetic induction. Dans: Case Studies in Construction Materials, v. 19 (décembre 2023).
- (2022): Experimental evaluation and recyclability potential of asphalt concrete mixtures with polyacrylonitrile fibers. Dans: Construction and Building Materials, v. 317 (janvier 2022).
- (2021): Critical assessment of new polymer-modified bitumen for porous asphalt mixtures. Dans: Construction and Building Materials, v. 307 (novembre 2021).
- (2021): Selection of fibers to improve porous asphalt mixtures using multi-criteria analysis. Dans: Construction and Building Materials, v. 266 (janvier 2021).
- (2020): Mechanical, environmental and economic feasibility of highly sustainable porous asphalt mixtures. Dans: Construction and Building Materials, v. 251 (août 2020).
- (2020): An experimental laboratory study of fiber-reinforced asphalt mortars with polyolefin-aramid and polyacrylonitrile fibers. Dans: Construction and Building Materials, v. 248 (juillet 2020).
- (2018): Effect of ageing and RAP content on the induction healing properties of asphalt mixtures. Dans: Construction and Building Materials, v. 179 (août 2018).
- (2020): Laboratory assessment of porous asphalt mixtures reinforced with synthetic fibers. Dans: Construction and Building Materials, v. 234 (février 2020).
- (2020): Multiple-response optimization of open graded friction course reinforced with fibers through CRITIC-WASPAS based on Taguchi methodology. Dans: Construction and Building Materials, v. 233 (février 2020).
- (2019): Assessment of carbon black modified binder in a sustainable asphalt concrete mixture. Dans: Construction and Building Materials, v. 211 (juin 2019).
- (2019): Mechanical assessment of the induction heating as a method to accelerate the drying process of cold porous asphalt mixtures. Dans: Construction and Building Materials, v. 208 (mai 2019).
- (2019): Mechanical performance of fibers in hot mix asphalt: A review. Dans: Construction and Building Materials, v. 200 (mars 2019).
- (2016): Comparative analysis of the performance of asphalt concretes modified by dry way with polymeric waste. Dans: Construction and Building Materials, v. 112 (juin 2016).
- (2016): Effect of air voids content on asphalt self-healing via induction and infrared heating. Dans: Construction and Building Materials, v. 126 (novembre 2016).
- (2017): Analysis of the skid resistance and adherence between layers of asphalt concretes modified by dry way with polymeric waste. Dans: Construction and Building Materials, v. 133 (février 2017).
- (2017): Porous asphalt mixture with alternative aggregates and crumb-rubber modified binder at reduced temperature. Dans: Construction and Building Materials, v. 150 (septembre 2017).
- (2019): Recyclability potential of asphalt mixes containing reclaimed asphalt pavement and industrial by-products. Dans: Construction and Building Materials, v. 195 (janvier 2019).
Structurae coopère avec
