Sun Hee Kim
- (2024): 한 방향 수직 다이어프램의 두께 및 간격 결정을 위한 단순인장 실험평가 (Simple Tensile Test Evaluation for Determining Thickness and Spacing of Single-direction Vertical Diaphragms). Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 36, n. 4 (27 août 2024).
- (2024): 하부 철근 보강된 부분 매입형 합성보의 내화성능 연구 (Study on Fire Resistance Performance of Partially Encased Composite Beams Reinforced with Re-bar). Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 36, n. 2 (27 avril 2024).
- (2021): 각형 강관과 철근 래티스로 구성된 층고절감형 합성거더의 휨 성능평가 (Evaluation of Flexural Performance of Composite Girder Consisting of Square Steel Pipes and Reinforced Lattice). Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 33, n. 4 (27 août 2021).
- (2021): 단면형상 변화에 따른 내다이어프램의 단순인장내력 실험평가 (Evaluation of Simple Tensile Strength of Internal Diaphragm According to Cross Sectional Shape). Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 33, n. 3 (27 juin 2021).
- (2020): 메가 컬럼(폭 1 m)의 구속효과를 위한 바인딩 프레임의 구조실험 (Structural Experiment of the Binding Frame for the Restricting Effect of a Mega Column (width 1 m)). Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 32, n. 2 (30 avril 2020).
- (2020): 단면 세장판요소에 따른 합성기둥의 편심압축실험 평가 (Evaluation of Eccentric Axial Load Test of Concrete Filled Tube Columns According to Factor of Thin-Walled Section). Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 32, n. 2 (30 avril 2020).
- (2013): 내부앵커형 콘크리트 충전 기둥의 내력 및 변형능력에 관한 연구 (A Study on the Load Carrying Capacity and Deformation Capacity of the Internal Anchors Welded Cold Formed Concrete Filled Columns). Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 25, n. 4 (août 2013).
- (2019): 인장강도 490급(FR355B) 내화강의 고온크리프 특성 및 거동 (High Temperature Creep Characteristics and Behavior of Fire Resistance Steel(FR355B)). Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 31, n. 3 (juin 2019).
- (2013): 상하 이형 다이아프램으로 보강된 2심 냉간성형 각형 CFT 기둥-보 접합부의 실험적 연구 (Experimental Study on Two-Seam Cold Formed Square CFT Column to Beam Connections with Asymmetric Diaphragms). Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 25, n. 1 (février 2013).
- (2012): HSB600 원형강관 기둥의 거동에 대한 실험적 연구. Experimental Study on the Behavior of Circular Steel Tube Columns using HSB600 Steel. Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 24, n. 6 (décembre 2012).
- (2016): 강섬유 콘크리트 혼입율에 따른 내부앵커형 콘크리트 충전기둥 내화성능에 관한 해석적 연구 (Analysis Study on Fire Performance with Internal Anchored Concrete Filled Steel Tube Columns According to Percent of Steel-Fibers). Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 28, n. 1 (février 2016).
- (2014): 관통형 다이아프램을 갖는 조립형 콘크리트 충전 각형 합성기둥-보 접합부의 내진성능 (Seismic Performance of Built-up Concrete Filled Square Composite Column-to beam Connection with Through Diaphragm). Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 26, n. 5 (octobre 2014).
- (2015): 조립형 무용접 좌굴방지재로 보강된 역V형 가새의 변형성능 (Deformation Capacity of Inverted V-Type Brace Strengthened by Built-up Non-welded Buckling Restraint Element). Dans: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 27, n. 3 (juin 2015).
Structurae coopère avec
