Gyuyong Kim 
- (2024): Alkali-Silica Reaction and Residual Mechanical Properties of High-Strength Mortar Containing Waste Glass Fine Aggregate and Supplementary Cementitious Materials. Dans: International Journal of Concrete Structures and Materials, v. 18, n. 1 (2 janvier 2024).
- (2024): ITZ properties of LWA surroundings in high strength mortar according to LWA/sand with relative humidity. Dans: Construction and Building Materials, v. 451 (novembre 2024).
- (2024): Investigation of Conditions for Using Mass-Produced Waste Glass as Sustainable Fine Aggregate for Mortar. Dans: International Journal of Concrete Structures and Materials, v. 18, n. 1 (2 janvier 2024).
- (2024): Monitoring long-term chloride penetration into wave power marine concrete structures under repeated air pressure. Dans: Construction and Building Materials, v. 428 (mai 2024).
- (2024): Field experiment on performance of water source heat pump using underground rainwater tank as heat source. Dans: Journal of Building Engineering, v. 84 (mai 2024).
- (2023): Characteristics on compressive strength and microstructure of high-strength cementitious composites with waste glass beads. Dans: Case Studies in Construction Materials, v. 19 (décembre 2023).
- (2023): Evaluation of mechanical properties and shielding effectiveness in mortar composites reinforced with waste aluminum alloy perforated sheets. Dans: Case Studies in Construction Materials, v. 19 (décembre 2023).
- (2019): Effect of moisture migration and water vapor pressure build-up with the heating rate on concrete spalling type. Dans: Cement and Concrete Research, v. 116 (février 2019).
- (2022): Effects of waste glass sand on the thermal behavior and strength of fly ash and GGBS based alkali activated mortar exposed to elevated temperature. Dans: Construction and Building Materials, v. 316 (janvier 2022).
- (2021): Impact resistance, flexural and tensile properties of amorphous metallic fiber-reinforced cementitious composites according to fiber length. Dans: Construction and Building Materials, v. 271 (février 2021).
- (2020): Influence of amorphous metallic fibers on spalling properties of high-strength concrete exposed to high temperature. Dans: Construction and Building Materials, v. 263 (décembre 2020).
- (2015): Static mechanical properties and impact resistance of amorphous metallic fiber-reinforced concrete. Dans: Composite Structures, v. 134 (décembre 2015).
- (2020): Effect of Mass Loss of Organic Fiber on the Water Vapor Pressure and Moisture Migration of 150 and 200 MPa Ultra-High Strength Concrete Exposed to High Temperature. Dans: Journal of Advanced Concrete Technology, v. 18, n. 6 (16 juin 2020).
- (2018): Evaluation of concrete degradation depending on heating conditions by ultrasonic pulse velocity. Dans: Construction and Building Materials, v. 171 (mai 2018).
- (2010): Hydration Heat and Autogenous Shrinkage of High-Strength Mass Concrete Containing Phase Change Material. Dans: Journal of Asian Architecture and Building Engineering, v. 9, n. 2 (novembre 2010).
- (2010): A Study on Thermal Efficiency of Heat Testing Machine for Heat Transfer of Concrete at High Temperature. Dans: Journal of Asian Architecture and Building Engineering, v. 9, n. 2 (novembre 2010).
- (2009): Hydration Heat and Autogenous Shrinkage of High-Strength Mass Concrete. Dans: Journal of Asian Architecture and Building Engineering, v. 8, n. 2 (novembre 2009).
- (2019): Effect of amorphous metallic fiber on mechanical properties of high-strength concrete exposed to high-temperature. Dans: Construction and Building Materials, v. 218 (septembre 2019).
- (2015): Evaluation of the mechanical properties of 200MPa ultra-high-strength concrete at elevated temperatures and residual strength of column. Dans: Construction and Building Materials, v. 86 (juillet 2015).
- (2015): Effect of coarse aggregate type and loading level on the high temperature properties of concrete. Dans: Construction and Building Materials, v. 78 (mars 2015).
- (2015): Restrained shrinkage behavior of expansive mortar at early ages. Dans: Construction and Building Materials, v. 84 (juin 2015).
- (2016): Compressive strength, resistance to chloride-ion penetration and freezing/thawing of slag-replaced concrete and cementless slag concrete containing desulfurization slag activator. Dans: Construction and Building Materials, v. 128 (décembre 2016).
- (2017): Strength development properties of geopolymer paste and mortar with respect to amorphous Si/Al ratio of fly ash. Dans: Construction and Building Materials, v. 151 (octobre 2017).
- (2017): Experimental Investigation on the Blast Resistance of Fiber-Reinforced Cementitious Composite Panels Subjected to Contact Explosions. Dans: International Journal of Concrete Structures and Materials, v. 11, n. 1 (février 2017).
- (2013): Effects of hydration heat velocity on autogenous shrinkage of high-strength concrete. Dans: Magazine of Concrete Research, v. 65, n. 23 (décembre 2013).
Structurae coopère avec
