Hongwen Jing 
- : Effects of Fatigue Load Amplitude on the Mechanical and Energy Evolution Characteristics of Stratified Rock Mass under Triaxial Cyclic Loading and Unloading Conditions. Dans: International Journal of Civil Engineering.
- (2024): Mechanical properties and microscopic mechanisms of deposited nanocarbon reinforced cement mortar. Dans: Construction and Building Materials, v. 449 (octobre 2024).
- (2024): Enhancement of the tensile properties of cement mortar composites with nanoadditives produced by chemical vapor deposition. Dans: Case Studies in Construction Materials, v. 21 (décembre 2024).
- (2024): Dynamic Compressive Mechanical Properties of Rock-like Material with Bedding Planes Subject to Different Impact Loads. Dans: KSCE Journal of Civil Engineering, v. 28, n. 6 (avril 2024).
- (2023): Investigating mechanical properties of cemented gangue backfill materials subjected to static-dynamic combined loads. Dans: Construction and Building Materials, v. 400 (octobre 2023).
- (2023): Experimental study of the direct shear characteristics of cement grout under constant normal loading and stiffness boundary conditions. Dans: European Journal of Environmental and Civil Engineering, v. 28, n. 3 (juillet 2023).
- (2023): Effect of CNT-FA hybrid on the mechanical, permeability and microstructure properties of gangue cemented rockfill. Dans: Construction and Building Materials, v. 392 (août 2023).
- (2023): Experiment and particle flow simulation of unloading induced shearing properties for jointed sandstone materials. Dans: Case Studies in Construction Materials, v. 18 (juillet 2023).
- (2023): Effect of Grain Size on the Dynamic Flexural Tensile Strength of Granite: Insight from GBM3D-PFC Simulations. Dans: International Journal of Geomechanics, v. 23, n. 5 (mai 2023).
- (2023): Carbon nanotubes assisted fly ash for cement reduction on the premise of ensuring the stability of the grouting materials. Dans: Construction and Building Materials, v. 368 (mars 2023).
- (2022): Industrial graphene oxide-fly ash hybrid for high-performance cemented waste rock backfill. Dans: Construction and Building Materials, v. 359 (décembre 2022).
- (2022): Experimental Study on the Damage Characteristics and Fracture Behaviour of Rock-like Materials with Weak Interlayer Zones. Dans: KSCE Journal of Civil Engineering, v. 26, n. 9 (1 août 2022).
- (2021): Influence of ultrasonication energy on reinforcing-roles of CNTs to strengthen ITZ and corresponding anti-permeability properties of concrete. Dans: Construction and Building Materials, v. 303 (octobre 2021).
- (2017): Effect of a Fault Fracture Zone on the Stability of Tunnel-Surrounding Rock. Dans: International Journal of Geomechanics, v. 17, n. 6 (juin 2017).
- (2017): General Analytical Model for Consolidation of Stone Column–Reinforced Ground and Combined Composite Ground. Dans: International Journal of Geomechanics, v. 17, n. 6 (juin 2017).
- (2018): Experimental Study on Mechanical Properties and Anchorage Performances of Rock Mass in the Fault Fracture Zone. Dans: International Journal of Geomechanics, v. 18, n. 7 (juillet 2018).
- (2019): Analytical Solution for Consolidation of Band-Shaped Drain Based on an Equivalent Annular Drain. Dans: International Journal of Geomechanics, v. 19, n. 6 (juin 2019).
- (2020): Mechanical Performances and Pore Features of Coal Subjected to Heat Treatment in Approximately Vacuum Environment. Dans: International Journal of Geomechanics, v. 20, n. 7 (juillet 2020).
- (2021): Experimental Investigation on Shear Behavior of Intact Sandstones under Constant Normal Stiffness Conditions. Dans: International Journal of Geomechanics, v. 21, n. 2 (février 2021).
- (2017): Consolidation of composite ground improved by granular columns with medium and high replacement ratio. Dans: Soils and Foundations, v. 57, n. 6 (décembre 2017).
- (2020): Experimental Study on the Fracture Evolution Processof Rock-like Specimens Containing a Closed RoughJoint Based on 3D-Printing Technology. Dans: Advances in Civil Engineering, v. 2020 (janvier 2020).
- (2018): Effect of Thermal Treatment on the Dynamic Behaviors at a Fixed Loading Rate of Limestone in Quasi-vacuum and Air-filled Environments. Dans: Latin American Journal of Solids and Structures, v. 15, n. 3 (mai 2018).
- (2020): Investigation on Mechanical and AE Characteristics of Yellow Sandstone Undergoing Wetting-Drying Cycles. Dans: KSCE Journal of Civil Engineering, v. 24, n. 11 (septembre 2020).
- (2020): Analytical solutions for consolidation of composite ground improved by composite columns with circular and non-circular cross sections. Dans: European Journal of Environmental and Civil Engineering, v. 26, n. 7 (juillet 2020).
- (2020): Influence of carbon nanotubes-based cement grouting nano-reinforcement on the mechanical behavior of sandstone with a single through-fracture under uniaxial compression. Dans: European Journal of Environmental and Civil Engineering, v. 26, n. 5 (mai 2020).
- (2020): Influence of methylcellulose on the impermeability properties of carbon nanotube-based cement pastes at different water-to-cement ratios. Dans: Construction and Building Materials, v. 244 (mai 2020).
- (2019): Experimental and numerical study on mechanical and fracture behavior of rock-like specimens containing pre-existing holes flaws. Dans: European Journal of Environmental and Civil Engineering, v. 26, n. 1 (octobre 2019).
- (2019): Experimental Study on Shear Behavior of Bolted Cement Mortar Blocks under Constant Normal Stiffness. Dans: KSCE Journal of Civil Engineering, v. 23, n. 8 (juin 2019).
- (2018): Effect of Thermal Environment on the Mechanical Behaviors of Building Marble. Dans: Advances in Civil Engineering, v. 2018 ( 2018).
- (2018): Experimental Study on the Shear Behavior of Bolted Concrete Blocks with Oblique Shear Test. Dans: Advances in Civil Engineering, v. 2018 ( 2018).
Structurae coopère avec
