Thanongsak Imjai 
- (2024): Performance of an EBR CFRP-strengthened RC slab using 24-h and cyclic load tests: a real case study. Dans: Journal of Building Pathology and Rehabilitation, v. 9, n. 2 (29 mai 2024).
- (2024): Deflections of high-content recycled aggregate concrete beams reinforced with GFRP bars and steel fibres. Dans: Engineering Structures, v. 312 (août 2024).
- (2024): Seismic behaviour of Exterior RC beam-column joints repaired and strengthened using post-tensioned metal straps. Dans: Bulletin of Earthquake Engineering, v. 22, n. 6 (12 mars 2024).
- (2024): Performance of a novel structural insulated panel in tropical climates: Experimental and numerical studies. Dans: Construction and Building Materials, v. 421 (mars 2024).
- : Performance of recycled aggregate concrete composite metal decks under elevated temperatures: a comprehensive review. Dans: Journal of Asian Architecture and Building Engineering.
- (2024): Thermal and acoustic performance of masonry walls with phase change materials: A comparison of scaled-down houses in tropical climates. Dans: Journal of Building Engineering, v. 82 (avril 2024).
- : Use of recycled aggregate concrete in structural members: a review focused on Southeast Asia. Dans: Journal of Asian Architecture and Building Engineering.
- (2023): Serviceability behaviour of FRP-reinforced slatted slabs made of high-content recycled aggregate concrete. Dans: Structures, v. 51 (mai 2023).
- (2022): Real time vibration measurement and inverse analysis for dynamic properties of an axisymmetric masonry structure. Dans: Journal of Asian Architecture and Building Engineering, v. 22, n. 4 (décembre 2022).
- (2022): Punching Shear Capacity of Recycled Aggregate Concrete Slabs. Dans: Buildings, v. 12, n. 10 (20 septembre 2022).
- (2022): Thermal Analysis of a Raft Concrete Foundation: A Case Study of a Leaking Ethane Tank. Dans: Buildings, v. 12, n. 7 (5 juillet 2022).
- (2022): Effect of synthetic microfiber and viscosity modifier agent on layer deformation, viscosity, and open time of cement mortar for 3D printing application. Dans: Construction and Building Materials, v. 319 (février 2022).
- (2023): Experimental and numerical investigation on low-strength RC beams strengthened with side or bottom near surface mounted FRP rods. Dans: Structure and Infrastructure Engineering, v. 19, n. 11 (mars 2023).
- (2021): Residual Strength of Reinforced Concrete Beams under Sequential Small Impact Loads. Dans: Buildings, v. 11, n. 11 (8 novembre 2021).
- (2021): Prediction of Shear Strength of Reinforced Recycled Aggregate Concrete Beams without Stirrups. Dans: Buildings, v. 11, n. 9 (25 août 2021).
- (2019): Use of burnt clay aggregate as phase change material carrier to improve thermal properties of concrete panel. Dans: Case Studies in Construction Materials, v. 11 (décembre 2019).
- (2020): Strengthening of damaged low strength concrete beams using PTMS or NSM techniques. Dans: Case Studies in Construction Materials, v. 13 (décembre 2020).
- (2021): A practical macro-mechanical model for the bend capacity of fibre-reinforced polymer bars. Dans: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 174, n. 10 (octobre 2021).
- (2016): A practical method for determining shear crack induced deformation in FRP RC beams. Dans: Engineering Structures, v. 126 (novembre 2016).
- (2017): Bend Strength of FRP Bars: Experimental Investigation and Bond Modeling. Dans: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 7 (juillet 2017).
Structurae coopère avec
