Shuguang Hu
- (2023): Improving the interfacial properties of PVA fiber and cementitious composite: Design and characterization. Dans: Construction and Building Materials, v. 409 (décembre 2023).
- (2024): Development of industrial-grade γ-C2S binder from limestone and sandstone: Preparation, properties, and microstructure. Dans: Construction and Building Materials, v. 411 (janvier 2024).
- (2019): Early-state water migration characteristics of superabsorbent polymers in cement pastes. Dans: Cement and Concrete Research, v. 118 (avril 2019).
- (2019): The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete. Dans: Cement and Concrete Research, v. 118 (avril 2019).
- (2022): Effect of w/c ratio and antifreeze admixture on the frost damage of sulfoaluminate cement concrete at − 20 °C. Dans: Construction and Building Materials, v. 347 (septembre 2022).
- (2022): Enhancing the mechanical behaviour of concretes through polymer modification of the aggregate-cement paste interface. Dans: Journal of Building Engineering, v. 54 (août 2022).
- (2022): Enhanced mechanical properties of polymer-modified cementitious materials via organosilane fly ash hybrid–polyvinyl pyrrolidone crosslink network. Dans: Construction and Building Materials, v. 330 (mai 2022).
- (2022): Effects of curing regimes on the chloride binding capacity of cementitious materials. Dans: Construction and Building Materials, v. 342 (août 2022).
- (2021): An alternative method for performance improvement of ultra-high performance concrete by internal curing: Role of physicochemical properties of saturated lightweight fine aggregate. Dans: Construction and Building Materials, v. 312 (décembre 2021).
- (2021): Evaluation on recycled clinker production and properties from regeneration of completely recycle concrete. Dans: Construction and Building Materials, v. 301 (septembre 2021).
- (2021): Effects of Asphalt Modification of Paste–Aggregate Interface on the Transport and Mechanical Properties of Concrete. Dans: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 6 (juin 2021).
- (2021): Enhance the durability of heat-cured mortars by internal curing and pozzolanic activity of lightweight fine aggregates. Dans: Construction and Building Materials, v. 270 (février 2021).
- (2020): Evolution of aluminate hydrate phases in fly ash-cement system under the sulfate conditions. Dans: Construction and Building Materials, v. 252 (août 2020).
- (2018): Improving the fluid transport properties of heat-cured concrete by internal curing. Dans: Construction and Building Materials, v. 168 (avril 2018).
- (2018): Experimental investigation on the autogenous shrinkage of steam cured ultra-high performance concrete. Dans: Construction and Building Materials, v. 162 (février 2018).
- (2020): The effect of activators on the dissolution characteristics and occurrence state of aluminum of alkali-activated metakaolin. Dans: Construction and Building Materials, v. 235 (février 2020).
- (2012): Experimental study on the stability of asphalt emulsion for CA mortar by laser diffraction technique. Dans: Construction and Building Materials, v. 28 (mars 2012).
- (2013): Effect of early cement hydration on the chemical stability of asphalt emulsion. Dans: Construction and Building Materials, v. 42 (mai 2013).
- (2014): Conductive aggregate prepared using graphite and clay and its use in conductive mortar. Dans: Construction and Building Materials, v. 53 (février 2014).
- (2014): The hierarchical porous structure of substrate enhanced photocatalytic activity of TiO2/cementitious materials. Dans: Construction and Building Materials, v. 64 (août 2014).
- (2014): Bond behavior of roughing FRP sheet bonded to concrete substrate. Dans: Construction and Building Materials, v. 73 (décembre 2014).
- (2016): Hydration monitoring and strength prediction of cement-based materials based on the dielectric properties. Dans: Construction and Building Materials, v. 126 (novembre 2016).
- (2016): Compatibility of repair materials with substrate low-modulus cement and asphalt mortar (CA mortar). Dans: Construction and Building Materials, v. 126 (novembre 2016).
- (2016): Enhanced photocatalytic efficiency and long-term performance of TiO 2 in cementitious materials by activated zeolite fly ash bead carrier. Dans: Construction and Building Materials, v. 126 (novembre 2016).
- (2017): Early hydration of C3S in the presence of Cd2+, Pb2+ and Cr3+ and the immobilization of heavy metals in pastes. Dans: Construction and Building Materials, v. 152 (octobre 2017).
- (2017): Hydration of quaternary phase-gypsum system. Dans: Construction and Building Materials, v. 152 (octobre 2017).
- (2017): Efficiency of metakaolin in steam cured high strength concrete. Dans: Construction and Building Materials, v. 152 (octobre 2017).
- (2019): The effect of supplementary cementitious materials on the permeability of chloride in steam cured high-ferrite Portland cement concrete. Dans: Construction and Building Materials, v. 197 (février 2019).
- (2010): Early age volume change of cement asphalt mortar in the presence of aluminum powder. Dans: Materials and Structures, v. 43, n. 4 (mai 2010).
- (2014): Effect of calcium–silicon ratio on microstructure and nanostructure of calcium silicate hydrate synthesized by reaction of fumed silica and calcium oxide at room temperature. Dans: Materials and Structures, v. 47, n. 1-2 (janvier 2014).
Structurae coopère avec
