Xin Cheng 
- (2024): Synchronous hot-pressed metakaolin-fly ash based geopolymer: Compressive strength and hydration products. Dans: Journal of Building Engineering, v. 97 (novembre 2024).
- (2024): A qualitative approach to describe the viscosity of flowable concrete made with manufactured sand containing different microfines. Dans: Construction and Building Materials, v. 451 (novembre 2024).
- (2024): Revealing failure loads of cyclically loaded H-steel columns from a thermodynamic perspective. Dans: Structures, v. 70 (décembre 2024).
- (2024): Seismic performance of the cantilever segment in prefabricated stepped beam–column joints. Dans: The Structural Design of Tall and Special Buildings, v. 33, n. 16 (13 octobre 2024).
- (2024): Phase and microstructure evolution of the hydration products of magnesium phosphate cements under sulfuric acid environments. Dans: Construction and Building Materials, v. 418 (mars 2024).
- (2024): A Theoretical Calculation Model of H-Section Steel Members for Biaxial Bending Moments. Dans: International Journal of Steel Structures, v. 24, n. 1 (janvier 2024).
- (2023): Physical and chemical chloride binding characteristics of the hydration products for phosphoaluminate cement. Dans: Construction and Building Materials, v. 403 (novembre 2023).
- (2024): Relating early-age hydration and flow loss of mortar prepared with manufactured sand. Dans: Construction and Building Materials, v. 411 (janvier 2024).
- (2024): Study on behavior of slender H-section stub columns subjected to axial compression. Dans: Journal of Constructional Steel Research, v. 212 (janvier 2024).
- (2023): Stressing state features of H-steel columns under cyclic biaxial bending action revealed from experimental residual strains. Dans: Case Studies in Construction Materials, v. 18 (juillet 2023).
- (2022): Study on green restoration of exposed mountain: Effect of isobutylidene diurea on slow-release of total nitrogen and physiological characteristics of euonymus fortune in planted eco-concrete. Dans: Construction and Building Materials, v. 359 (décembre 2022).
- (2022): Synthesis and effect of highly active nano-SiO2 on ion/water transmission property of cement-based materials. Dans: Journal of Building Engineering, v. 59 (novembre 2022).
- (2022): Regulations on the hydration, morphology, and sulfate-attack resistivity of C3A with micro/nano-silica particles. Dans: Construction and Building Materials, v. 324 (mars 2022).
- (2021): Synergistic effects of supplementary cementitious materials in limestone and calcined clay-replaced slag cement. Dans: Construction and Building Materials, v. 282 (mai 2021).
- (2021): Stability and leaching resistance performance of SAC repair and solidification materials exposed to gamma irradiation. Dans: Construction and Building Materials, v. 302 (octobre 2021).
- (2021): Study on Ultimate Capacity of Steel H-Section Members Under Combined Biaxial Bending and Axial Force. Dans: International Journal of Steel Structures, v. 21, n. 5 (septembre 2021).
- (2021): Printability and efflorescence control of admixtures modified 3D printed white Portland cement-based materials based on the response surface methodology. Dans: Journal of Building Engineering, v. 38 (juin 2021).
- (2020): Synergistic effects of nano-silica and fly ash on properties of cement-based composites. Dans: Construction and Building Materials, v. 262 (novembre 2020).
- (2013): Properties of Waste-Based Geopolymer Building Blocks. Dans: Applied Mechanics and Materials, v. 357-360 (août 2013).
- (2020): SiO2/TiO2 composite powders deposited on cement-based materials: Rhodamine B removal and the bonding mechanism. Dans: Construction and Building Materials, v. 241 (avril 2020).
- (2020): Rheological parameters and building time of 3D printing sulphoaluminate cement paste modified by retarder and diatomite. Dans: Construction and Building Materials, v. 234 (février 2020).
- (2019): Pore structure evolution and strength development of hardened cement paste with super low water-to-cement ratios. Dans: Construction and Building Materials, v. 227 (décembre 2019).
- (2019): Recycling of paper sludge powder for achieving sustainable and energy-saving building materials. Dans: Construction and Building Materials, v. 229 (décembre 2019).
- (2019): Sectional constitutive model for the thin-walled steel H-section beam-column element. Dans: Journal of Constructional Steel Research, v. 156 (mai 2019).
- (2015): Temperature and loading effects of embedded smart piezoelectric sensor for health monitoring of concrete structures. Dans: Construction and Building Materials, v. 76 (février 2015).
- (2016): The synergistic effect of nano-silica with blast furnace slag in cement based materials. Dans: Construction and Building Materials, v. 126 (novembre 2016).
- (2017): Photocatalytic and hydrophobic activity of cement-based materials from benzyl-terminated-TiO 2 spheres with core-shell structures. Dans: Construction and Building Materials, v. 148 (septembre 2017).
- (2004): Piezoelectric properties of 0-3 PZT/sulfoaluminate cement composites. Dans: Smart Materials and Structures, v. 13, n. 2 (avril 2004).
- (2018): Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials. Dans: Construction and Building Materials, v. 189 (novembre 2018).
- (2018): Study on the preparation and properties of belite-ye'elimite-alite cement. Dans: Construction and Building Materials, v. 182 (septembre 2018).
Structurae coopère avec
