Wujun Chen
- (2024): Thermo-structural analysis and design for multi-functional membrane roofs of airport terminals. Dans: Structures, v. 62 (avril 2024).
- (2023): Structural design and experimental study on the axial compression behavior of large-span carbon-fiber-reinforced polymer truss structures. Dans: Advances in Structural Engineering, v. 27, n. 2 (11 décembre 2023).
- (2023): OPV-PCM-ETFE foils in use for public buildings: electrical performance and thermal characteristics. Dans: Journal of Building Engineering, v. 71 (juillet 2023).
- (2023): Numerical and experimental studies on the dynamic equivalence of a large rectangular membrane and a grid membrane. Dans: Engineering Structures, v. 292 (octobre 2023).
- (2023): Structural design and integral assembly procedure of rigid-flexible tensegrity airship structure. Dans: Engineering Structures, v. 284 (juin 2023).
- (2023): Research on the control limits of cable length errors of cable-strut tensile structures for prestressed relaxation under load effect. Dans: Structures, v. 54 (août 2023).
- (2023): Static stability test and simulation of a large-scale modular carbon fiber reinforced polymer wheel-spoke-shaped stiffening ring subjected to multi-point radial loading. Dans: Engineering Structures, v. 285 (juin 2023).
- (2023): Structural design and manufacturing length errors analyses of crossed spoke cable-truss structure. Dans: Advances in Structural Engineering, v. 26, n. 7 (février 2023).
- (2023): Structural design and compression-bending test of ultra-lightweight carbon-fiber-reinforced polymer truss structures. Dans: Composite Structures, v. 313 (juin 2023).
- (2022): Thermal environment analysis of enclosed dome with double-layered PTFE fabric roof integrated with aerogel-glass wool insulation mats: On-site test and numerical simulation. Dans: Energy and Buildings, v. 254 (janvier 2022).
- (2021): Shear performance and mechanism analysis of warp-knitted non-crimp fabric composites under combined shear and tension loading. Dans: Composite Structures, v. 263 (mai 2021).
- (2021): Rate-dependent mechanical properties and elastic modulus of ETFE foils used in inflated forming of transparency air-inflated cushion membrane structures. Dans: Engineering Structures, v. 227 (janvier 2021).
- (2017): Two-layer ETFE cushions integrated flexible photovoltaics: Prototype development and thermal performance assessment. Dans: Energy and Buildings, v. 141 (avril 2017).
- (2020): Photothermal-structural-fluid behaviors of PV-ETFE cushion roof in summer: Numerical analysis using three-dimensional multiphysics model. Dans: Energy and Buildings, v. 228 (décembre 2020).
- (2019): Response surface characterization for biaxial tensile properties of envelope fabrics under multiple stress ratios. Dans: Composite Structures, v. 230 (décembre 2019).
- (2019): A multi-scale method for predicting ABD stiffness matrix of single-ply weave-reinforced composite. Dans: Composite Structures, v. 230 (décembre 2019).
- (2018): A new biaxial tensile shear test method to measure shear behaviour of coated fabrics for architectural use. Dans: Composite Structures, v. 203 (novembre 2018).
- (2017): A study of flattening process of deployable composite thin-walled lenticular tubes under compression and tension. Dans: Composite Structures, v. 168 (mai 2017).
- (2020): Uniaxial tensile creep properties of ETFE foils at a wide range of loading stresses subjected to long-term loading. Dans: Construction and Building Materials, v. 253 (août 2020).
- (2020): Safety and serviceability of membrane buildings: A critical review on architectural, material and structural performance. Dans: Engineering Structures, v. 210 (mai 2020).
- (2020): Temperature-stress-time methodology for flat-patterning ETFE cushions in use for large-span building structures. Dans: Engineering Structures, v. 204 (février 2020).
- (2014): Uniaxial cyclic tensile mechanical properties of ethylene tetrafluoroethylene (ETFE) foils. Dans: Construction and Building Materials, v. 63 (juillet 2014).
- (2015): Uniaxial tensile mechanical properties and model parameters determination of ethylene tetrafluoroethylene (ETFE) foils. Dans: Construction and Building Materials, v. 75 (janvier 2015).
- (2015): Mechanical responses and damage morphology of laminated fabrics with a central slit under uniaxial tension: A comparison between analytical and experimental results. Dans: Construction and Building Materials, v. 101 (décembre 2015).
- (2016): Mechanical properties of ETFE foils in form-developing of inflated cushion through flat-patterning. Dans: Construction and Building Materials, v. 111 (mai 2016).
- (2017): Modal behaviors and influencing factors analysis of inflated membrane structures. Dans: Engineering Structures, v. 132 (février 2017).
- (2017): Mechanical properties and structural performance of ETFE (ethylene-tetrafluoroethylene) cushion structures at low temperatures. Dans: Engineering Structures, v. 136 (avril 2017).
- (2018): Shear behavior of architectural coated fabrics under biaxial bias-extension. Dans: Construction and Building Materials, v. 187 (octobre 2018).
- (2018): Shear Properties of PVDF-Coated Fabrics under Multicyclic Biaxial Bias Extension. Dans: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 10 (octobre 2018).
- (2017): Shear properties of P/G type architectural fabrics under biaxial extension. Présenté pendant: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
Structurae coopère avec
