Seung-Hwan Chang 
- (2022): Performance of liquid crystalline polyester composite burn-in board connectors under cyclic high-temperature condition. Dans: Composite Structures, v. 286 (avril 2022).
- (2021): Prediction of composite layer thickness for Type III hydrogen pressure vessel at the dome part. Dans: Composite Structures, v. 271 (septembre 2021).
- (2020): Novel biodegradable hybrid composite of polylactic acid (PLA) matrix reinforced by bioactive glass (BG) fibres and magnesium (Mg) wires for orthopaedic application. Dans: Composite Structures, v. 245 (août 2020).
- (2020): Impact characterisation of draped composite structures made of plain-weave carbon/epoxy prepregs utilising smart grid fabric consisting of ferroelectric ribbon sensors. Dans: Composite Structures, v. 238 (avril 2020).
- (2019): Simulation of compression moulding process for long-fibre reinforced thermoset composites considering fibre bending. Dans: Composite Structures, v. 230 (décembre 2019).
- (2019): Stretchable strain sensor based on a nanocomposite of zinc stannate nanocubes and silver nanowires. Dans: Composite Structures, v. 224 (septembre 2019).
- (2017): Hygroscopic effects on the penetration-resistance behavior of a specially-orthotropic CFRP composite plates. Dans: Composite Structures, v. 176 (septembre 2017).
- (2017): Influence of initial biomechanical environment provided by fibrous composite intramedullary nails on bone fracture healing. Dans: Composite Structures, v. 175 (septembre 2017).
- (2017): Formability of complex composite structures with ribs made of long carbon-fiber-reinforced prepregs. Dans: Composite Structures, v. 168 (mai 2017).
- (2017): How post-operative rehabilitation exercises influence the healing process of radial bone shaft fractures fixed by a composite bone plate. Dans: Composite Structures, v. 159 (janvier 2017).
- (2015): Flexible cell culture device made of membrane-type silicone composites for simulating human body. Dans: Composite Structures, v. 134 (décembre 2015).
- (2015): Thermal behavior and performance evaluation of epoxy-based polymer concretes containing silicone rubber for use as runway repair materials. Dans: Composite Structures, v. 119 (janvier 2015).
- (2015): Optimal design of a functionally graded biodegradable composite bone plate by using the Taguchi method and finite element analysis. Dans: Composite Structures, v. 119 (janvier 2015).
- (2015): Stress analysis of runway repaired using compliant polymer concretes with consideration of cure shrinkage. Dans: Composite Structures, v. 119 (janvier 2015).
- (2014): Safety evaluation of 70MPa-capacity type III hydrogen pressure vessel considering material degradation of composites due to temperature rise. Dans: Composite Structures, v. 113 (juillet 2014).
- (2019): Mechanical performance evaluation of composite hybrid pantograph upper arm under environmental cyclic conditions: Experimental verification. Dans: Composite Structures, v. 210 (février 2019).
Structurae coopère avec
