Folke Björk
- (2012): Sustainable refurbishment in building technology. Dans: Smart and Sustainable Built Environment, v. 1, n. 3 (novembre 2012).
- (2013): The application of the parametric analysis for improved energy design of a ground source heat pump for residential buildings. Dans: Energy and Buildings, v. 63 (août 2013).
- (2017): Energy mapping of existing building stock in Sweden – Analysis of data from Energy Performance Certificates. Dans: Energy and Buildings, v. 153 (octobre 2017).
- (2015): Turning building renovation measures into energy saving opportunities. Dans: Structural Survey, v. 33, n. 2 (mai 2015).
- (2010): Air Gap Method: drying of a concrete slab on ground construction. Dans: Structural Survey, v. 28, n. 4 (août 2010).
- (2008): Air Gap Method: measurements of airflow inside air gaps of walls. Dans: Structural Survey, v. 26, n. 4 (août 2008).
- (2008): Air gaps in building construction avoiding dampness and mould. Dans: Structural Survey, v. 26, n. 3 (juillet 2008).
- (2012): Air Gap Method: Dependence of water removal on RH in room and height of floor air gap. Dans: Building and Environment, v. 56 (octobre 2012).
- (1994): Welding methods with reduced fire hazard for single-ply polymer-modified bituminous roofing materials. Dans: Fire and Materials, v. 18, n. 6 (novembre 1994).
- (1994): Non‐destructive evaluation of heat‐welded seams of roof coverings. Ultrasonic pulse‐echo methods used to evaluate the single‐ply roof coverings for low slope roofs with particular emphasis on periodic quality control of heat‐welded seams in polymer‐bituminous single ply roofing. Dans: Building Research & Information, v. 22, n. 2 ( 1994).
- (2011): Owner Preferences Regarding Renovation Measures – the Demonstration of Using Multi-Criteria Decision Making/ Savininkų teikiami prioritetai pastatų atnaujinimo priemonėms: daugiakriterinių sprendimo priėmimo metodų taikymo pavyzdys. Dans: Journal of Civil Engineering and Management, v. 17, n. 2 (juillet 2011).
- (1993): Single-ply roof coverings on flat roofs. Dans: Construction and Building Materials, v. 7, n. 4 (décembre 1993).
- (1994): Joint strength of single-ply roof coverings adhered to sheet metal. Dans: Construction and Building Materials, v. 8, n. 1 (janvier 1994).
- (1996): Wind load resistance of heat-welded seams in polymer-modified bituminous roofing membranes. Dans: Construction and Building Materials, v. 10, n. 2 (mars 1996).
- (2008): A laboratory equipment for the study of moisture processes in thermal insulation materials when placed in a temperature field. Dans: Construction and Building Materials, v. 22, n. 12 (décembre 2008).
- (2009): Frost formation and condensation in stone–wool insulations. Dans: Construction and Building Materials, v. 23, n. 5 (mai 2009).
- (2009): Properties of thermal insulation materials during extreme environment changes. Dans: Construction and Building Materials, v. 23, n. 6 (juin 2009).
- (1996): Study on seam performance of polymer-modified bituminous roofing membranes using T-peel test and microscopy. Dans: Materials and Structures, v. 29, n. 2 (mars 1996).
- (2018): Comparative life-cycle assessment for renovation methods of waste water sewerage systems for apartment buildings. Dans: Journal of Building Engineering, v. 19 (septembre 2018).
- (2000): Joints between roofing felt and sheet metal flashings —short- and long-term tests. Dans: Construction and Building Materials, v. 14, n. 6-7 (septembre 2000).
- (2002): Measurement of alkalinity in concrete by a simple procedure, to investigate transport of alkaline material from the concrete slab to a self-levelling screed. Dans: Construction and Building Materials, v. 16, n. 8 (décembre 2002).
- (2003): Degradation of components in flooring systems in humid and alkaline environments. Dans: Construction and Building Materials, v. 17, n. 3 (avril 2003).
- (2003): Wind load resistance tests of heat-welded joints between roofing felt and sheet metal flashings. Dans: Construction and Building Materials, v. 17, n. 5 (juillet 2003).
Structurae coopère avec
