• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Workability, Setting Time and Strength of High-Strength Concrete Containing High Volume of Palm Oil Fuel Ash

Auteur(s):



Médium: article de revue
Langue(s): en 
Publié dans: The Open Civil Engineering Journal, , n. 1, v. 12
Page(s): 35-46
DOI: 10.2174/1874149501812010035
Abstrait:

Introduction:

Palm oil fuel ash in two various forms-ground (GPOFA) by heat-treated carbon-free ultrafine of a median particle size of 2 μm (UPOFA) were utilized to produce high strength concretes (HSC-GPOFA (HSCgx), HSC-UPOFA (HSCux), and HSC-OPC) at different levels ordinary Portland cement (OPC) partial replacements (x) of 20, 40 and 60%.

Methods:

The workability (slump, slump loss, and compacting factor), initial and final setting times and strength in both forms of concrete were investigated.

Results and Conclusion:

The results showed that HSCu had improved physical properties and chemical compositions, extended setting times, enhanced workability, better strength, and enhanced workability retention compared to HSCg and HSC-OPC. Further, POFA carbon content negatively influenced the workability and setting time, while its specific gravity had a positive influence due to the enhancement of paste volume and particles lubrication effects. However, carbon content and surface areas of POFA did not significantly influence the compressive strength of HSC at the level of partial OPC substitution not exceeding 40%.

Copyright: © 2018 A.M. Zeyad et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10175176
  • Publié(e) le:
    25.11.2018
  • Modifié(e) le:
    02.06.2021