0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Vibration Theoretical Analysis of Elastically Connected Multiple Beam System under the Moving Oscillator

Auteur(s):

Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2019
Page(s): 1-11
DOI: 10.1155/2019/4950841
Abstrait:

To investigate the vibration analysis of elastically connected multiple beam system (ECMB) under the moving oscillator, finite sine-Fourier transform has been applied to the dynamic partial differential equations of ECMB with respect to space coordinates. Then, the numerical integration has been used to solve the equations. Finally, the expression for vibration analysis of ECMB under the moving oscillator has been derived based on finite sine-Fourier inverse transform. Using the method developed in this study and ANSYS numerical method, the vibration analysis of a four-layer beam system under moving oscillator with different speeds has been calculated. The results show that the calculated results from the method developed in this study are in good agreement with the ANSYS numerical calculation results, and the differences between the two calculation results are all less than 2%, which verified the correctness of the method developed in this study. The method developed in this study has been applied to the beam-rail system on a railway line in China. The effect of the train speed and interlayer stiffness on the vibration of beam-rail system has been investigated. The results show that the maximum dynamic deflection of the rail under the train load is always near the midspan, while the maximum dynamic deflections of the track plate, base plate, and bridge occur after the train travel through the midspan. The interlayer stiffness has a larger impact on the vibration of the rail and the track plate and little impact on the vibration of the base plate and the bridge.

Copyright: © Binbin He and Yulin Feng et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10376778
  • Publié(e) le:
    19.10.2019
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine