Vibration control and transmission mechanism of super high-rise building located on subway based on spring vibration isolation system

This study focuses on the vibration control effect of the spring vibration isolation system (SVIS) on a super high-rise building located on the subway (BLS) and the transmission mechanism of vibration in super high-rise BLS. Firstly, the 1:35 scale shaking table test model of super high-rise BLS is designed, the rationality of the shaking table test model is verified, and the shaking table test is implemented. Secondly, the finite element model (FEM) is established and verified based on the results of the shaking table test. Finally, based on verified FEM, the vibration control effect of SVIS on super high-rise BLS and the vibration transmission mechanism of super high-rise BLS is analyzed. The results show that the vibration response of the BLS show amplification trend along the height direction. The amplification of vibration response of BLS is effectively controlled by SVIS. The higher the floor, the greater the reduction coefficient, and the better the control effect. The reduction coefficient above 10F is mainly distributed above 0.80 due to the SVIS. The BLS equipped with the SVIS maintains the degree of Z-direction vibration and 1/3 octave vibration acceleration level that is within the limits stipulated by the specifications. The first_order vertical frequency of BLS equipped with the SVIS is adjusted from 65 Hz to 8 Hz, far from the favorable frequency range of the subway wave.