Utilization of Solar Energy for Water Heating Application to Improve Building Energy Efficiency: An Experimental Study

The manuscript is written for flow escalation based on an experimental data for a Solar Assisted Heat Pump Water Heater (SAHPWH) increasing building energy efficiency. For the investigation, a Solar Assisted Heat Pump (SAHP) was conceived, manufactured, and tested in real time. The findings of the experiments shows that single glazing with average sun radiation of 600–750 W/m², COP of approx. 6 can be obtained with identical heat gains. This study shows that when a flat plate collector of area 1.83 m (L) × 1.22 m (W) × 0.1 m (T) with a 0.5-mm-thick black copper plate absorber with clear glazing as a cover receives average radiation of 700 W/m², then setup can supply 60 litres of water for residential use from 15 °C to 45 °C in approx. 70 min. In addition, the study finds that the collector efficiency factor F’ is likewise shown to have a direct connection with the absorber and an inverse relationship of tube spacing. The findings indicated that the technology has significant commercial potential, particularly in sectors such as with solar resources for improving building energy efficiency.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.