0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

A two-step modeling method for constructing 3D negative Poisson’s ratio materials with high specific strength based on common lattice structures

Auteur(s):
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Smart Materials and Structures, , n. 8, v. 33
Page(s): 085023
DOI: 10.1088/1361-665x/ad61a6
Abstrait:

The traditional negative Poisson’s ratio (NPR) structure was basically designed based on concave or rotational mechanisms, resulting in relatively low specific strength and limiting its application. This paper proposed a two-step modeling method to establish a connection between the common lattice structures and NPR structures, which can obtain NPR structures with high specific strength. The models with different triaxial compression ratios were obtained through triaxial compression FE simulation to the selected initial configuration. Then, the mechanical properties of these models were studied through uniaxial compression FE simulation and experiments. In the research scope of this paper, the results demonstrate that the lattice structure can get NPR through the two-step modeling method when the Maxwell’s number is less than or equal to zero. The specific strength of the NPR structure obtained through the two-step modeling method was at most 1.5 times higher than that of the traditional 3D star-shaped NPR structure. Due to the high designability and excellent mechanical properties of lattice structures, this work provides a novel method for the manufacture of NPR structures with high specific strength.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1088/1361-665x/ad61a6.
  • Informations
    sur cette fiche
  • Reference-ID
    10790644
  • Publié(e) le:
    01.09.2024
  • Modifié(e) le:
    01.09.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine