Treatment of Natural Fiber for Application in Concrete Pavement

Concrete crack is one of the main problems observed in concrete technology due to drying shrinkage. Incorporating fibers in concrete production is one of the mechanisms implemented to mitigate cracks. Nowadays, investigators concentrate on different techniques to replace human-made fiber with existing natural fibers for fiber-reinforced composite material. Utilization of natural fiber has an initiation for the development of eco-friendly materials by reducing damages caused by human-made materials and saving nonrenewable resources. Natural fibers are readily and abundantly available, sustainable, and biodegradable, with low cost and low density, and have superior specific properties. Nevertheless, there are some limitations of natural fiber compared to human-made fiber. Consequently, significant energy was applied to alter natural fiber’s surface and morphology using physical, chemical, and biological treatment techniques to overcome the limitation. The primary intention of surface treatment is to modify the bond between the fiber surface and the polymer matrix. However, based on this literature review, there were no specific treatment techniques to be followed to select the best one from the others as criteria. It should include all parameters to consider starting from the stage from the cradle to the grave, cost of chemicals, transportation, and labors, including energy consumption and effluent energy. Additionally, their environmental effect also investigated in detail to compare each other.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.