0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Time-Dependent Behavior of Composite Steel–Recycled Aggregate Concrete Beams via Thermomechanical Finite Element Modeling

Auteur(s):



Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 6, v. 12
Page(s): 756
DOI: 10.3390/buildings12060756
Abstrait:

This paper aims to investigate the impact of recycled coarse aggregate (RCA) on the time-dependent behavior of composite steel–recycled aggregate concrete (RAC) beams. The FE models of the composite beams were established, and a parametric study was conducted to obtain the primary factors. Furthermore, the design method for predicting the long-term deflection was proposed by including the shrinkage deflection component. The results showed that the RCA replacement ratio significantly influenced the long-term deflection of composite beams; the long-term deflection of composite beams with 100% RCA increased by 3.5–17.2% compared with those without RCA. Moreover, using uniform shrinkage and creep models led to a 4.5–10.3% overestimation of the long-term deflection of the composite beams with the composite slabs due to nonuniform shrinkage and creep distributions. Finally, the proposed design procedures could accurately predict the long-term deflection of the composite steel–RAC beams, and the difference between the calculated and FE results ranged from 0.961 to 0.986.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10679576
  • Publié(e) le:
    17.06.2022
  • Modifié(e) le:
    10.11.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine