0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Thermally Treated Waste Silt as Geopolymer Grouting Material and Filler for Semiflexible Pavements

Auteur(s): ORCID
ORCID
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Infrastructures, , n. 8, v. 7
Page(s): 99
DOI: 10.3390/infrastructures7080099
Abstrait:

Considering the future shortage of natural aggregates, various researchers have promoted the recycling of by-products into various asphalt pavement types. This paper promoted a double-recycling technique, where thermally treated waste silt was used as a filler for the bituminous skeleton and grouting material of a geopolymer-based semiflexible pavement. Semiflexible pavements (SFP) inherit the flexibility of common asphalt pavements and simultaneously benefit from the rigidity of cement concrete pavements. For this purpose, waste silt obtained from a local asphalt plant was thermally treated at 750 °C and was used as the filler to produce the porous skeleton. Two different materials, including conventional cement-based and a geopolymer-based cement, were used as the grouting material. The geopolymer grout was produced by mixing metakaolin (MK), potassium-based liquid hardener and calcined silt as filler. The porous and grouted samples were characterized in terms of indirect tensile strength (ITS), the indirect tensile strength modulus (ITSM) and moisture sensitivity. The use of thermally treated waste silt as filler in porous asphalt demonstrated promising results and was comparable to the control samples produced with limestone as the filler. However, the control samples grouted with cement-based material outperformed the geopolymer grout in all aspects. Moreover, the addition of calcined silt improved the low-temperature fatigue performance of porous and grouted asphalt pavements.

Copyright: © 2022 the Authors. Licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10722845
  • Publié(e) le:
    22.04.2023
  • Modifié(e) le:
    10.05.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine