Thermal Performance Optimization of Building Envelopes in a Low-Cost and Energy-Saving Rural Dwelling in Severe Cold Region—Taking Central Area of Liaoning as an Example

The thermal performance of rural building envelopes is mostly non-standardized in Northern China, resulting in significant heat loss. In this study, we take, as an example, the central area of Liaoning province, with the objective of proposing some low-cost and energy-efficient solutions. Through our investigations, we found that heating energy consumption was reduced by 20% and construction costs increased by less than CNY 8000 (USD 1108), which can be accepted by rural residents. In order to achieve this target, the NSGA-II algorithm integrated with Rhino + Grasshopper and EnergyPlus simulation kernel was used to establish a thermal performance optimization model for the heat transfer of rural building envelopes in this severe cold region. Among the above-calculated Pareto optimal solutions, the recommended thickness of insulation layers for room floors, roofs, and external walls was about 70 mm, 50 mm, and 40 mm, respectively. Furthermore, we tried to reduce the window-to-wall ratio as much as possible. Finally, based on both the lower building renovation cost and energy-saving rate, three technical solutions from which rural residents could select, according to their specific needs, are put forward.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.