The summer indoor temperatures of the English housing stock: Exploring the influence of dwelling and household characteristics
|Médium:||article de revue|
|Publié dans:||Building Services Engineering Research and Technology, juin 2019, n. 4, v. 40|
As the high temperatures experienced during the summer of 2018 may become commonplace by 2050, adaptation to higher indoor temperatures while minimising the need for mechanical cooling is required. A thorough understanding of the factors that influence indoor temperatures can enable the design of healthier and safer dwellings under a warming climate. The aim of this paper is to provide further insight into the topic of indoor overheating through the analysis of the largest recent sample of English dwellings, the 2011 Energy Follow-Up Survey, comprised of 823 dwellings. Following the pre-processing stage, the indoor overheating risk of 795 living rooms and 799 bedrooms was quantified using the criteria defined within CIBSE's Technical Memorandum 59. Approximately 2.5% of the dwellings were found to exceed Criterion 1, with this figure approaching 26% when Criterion 2 was considered. Subsequently, the indoor temperatures were standardised against external weather conditions and the correlation of 11 dwelling and 9 household characteristics was examined. Factors such as the main heating system, tenure and occupant vulnerability were all found to have a statistically significant association with the indoor temperatures. Further analysis revealed multiple correlations between household and dwelling characteristics, highlighting the complexity of the indoor overheating problem.
Practical application: By applying the criteria in CIBSE's TM59, 26% of the dwellings monitored during the 2011 Energy Follow-Up Survey were found to overheat. Since 2011 was a cool summer and future temperatures are expected to be warmer, even more dwellings are expected to fail these criteria in the future. Multiple dwelling and household characteristics were associated with higher indoor temperatures, including: dwellings with a SAP rating > 70, more recently built and with communal heating. Thus, it is crucial to consider indoor overheating risk at the building design or refurbishment stage to prevent the possible consequences of uncomfortably high indoor temperatures.
Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.
sur cette fiche
- Publié(e) le:
- Modifié(e) le: