Study on Seismic Performance of Porcelain Pillar Electrical Equipment Based on Nonlinear Dynamic Theory

In order to consider the influence of nonlinear characteristics of porcelain pillar electrical equipment on the dynamic response under seismic excitation, a theoretical analysis method of nonlinear dynamics was raised to define the nonlinear parameter of the flange connection and establish a dynamic model of porcelain pillar electrical equipment. The theoretical analysis and the test results have a good degree of fitting, which verifies the correctness of the dynamic model and reveals the nonlinear seismic response law of the porcelain pillar equipment. According to the results, both the nonlinear calculation results of the displacement at the top end of the porcelain pillar and the stress at the bottom end of the porcelain pillar are smaller than the results in the linear calculation. The difference between them increases gradually with the increase of seismic excitation. The differences in displacement and stress at a seismic excitation of 0.5 g are 14.58% and 23.25%, respectively. When the nonlinear parameter increases to a certain value, the impact of maximum stress on the bottom of the porcelain pillar is very small and the change is not obvious. The research provides a theoretical reference for the seismic design of pillar electrical equipment.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.