Study on Mechanical Properties and Microstructure of Basalt Fiber Reactive Powder Concrete

In order to promote the wide application of reactive powder concrete (RPC) in practical engineering. In this paper, RPC was prepared using conventional and economical natural river sand instead of quartz sand and economical and environmentally friendly basalt fiber (BF) instead of steel fiber, and the macroscopic properties of basalt fiber reactive powder concrete (BFRPC) with different fiber content, such as flowability, failure mode, compressive strength and splitting tensile strength were studied, and the strength calculation formula of BFRPC was established based on the mechanical property results. The microscopic morphology and structure of BFRPC were characterized by scanning electron microscope (SEM) and Image Pro Plus (IPP) image processing software. The results show that BF has a small effect on the compressive strength of RPC, while it has a significant increase on the splitting tensile strength. When BF content is at 2 kg/m³, the 28-day compressive strength reaches 95.2 MPa and splitting tensile strength reaches 7.78 MPa. Compared with the RPC with BF of 0 kg/m³, the BFRPC shows an improvement in its 28-day compressive strength by 25.70% and an increase in its splitting tensile strength by 83.92%. According to the microscopic analysis, reasonable fiber content can optimize the internal microstructure of BFRPC, but excessive BF content will produce agglomeration and overlap, resulting in strength loss. Based on the gray correlation analysis method, it was concluded that the particle area ratio and pore fraction dimension were the most correlated with the mechanical properties of BFRPC. In addition, the feasibility and applicability of the BFRPC strength calculation formula were summarized. This research results of this paper provides a valuable reference for the further research and promotion of BFRPC.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.