0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Study on Acoustic Emission Localization of Concrete Using Modified Velocity

Auteur(s):

Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2019
Page(s): 1-11
DOI: 10.1155/2019/6890327
Abstrait:

To improve the accuracy of the acoustic emission (AE) source localization, a new 3D AE source localization method was investigated which used a combination of the modified velocity and the 3D localization algorithm based on the exhaustive method. The wave speed has a significant effect on the AE location results. With the increase of distance, the AE signal seriously attenuated due to the anisotropy of concrete, and the measured velocity changed for various distances. The velocity-distance curves were obtained when employing different water-cement ratios (W/C) and aggregate sizes. However, the current AE location system adopted constant wave velocity. As a result, the error was tremendous. The accuracy of the localization before and after the modified velocity was compared. The 3D localization results showed that compared with the constant wave velocity, the position deviation of the modified velocity was smaller and the localization results with the modified velocity were more accurate.

Copyright: © 2019 Jiapeng Li et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10314296
  • Publié(e) le:
    07.06.2019
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine